This reverts commit 723697551a7e926abe7d3c7f2966012b8075143d.
This change was poorly tested on my part. It squelched card insertion
interrupts on reset, but that was not necessary because sdhci_reset()
clears all the registers (via the call to memset), so the subsequent
sdhci_insert_eject_cb() call never sees the card insert interrupt
enabled. However, not calling the insert_eject_cb results in prnsts
remaining 0, when it actually needs to be updated to indicate card
presence and R/O status.
Signed-off-by: Andrew Baumann <andrew.baum...@microsoft.com>
---
hw/sd/sdhci.c | 9 +++------
include/hw/sd/sdhci.h | 1 -
2 files changed, 3 insertions(+), 7 deletions(-)
diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index 73e7c87..f175b30 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -198,11 +198,9 @@ static void sdhci_reset(SDHCIState *s)
* initialization */
memset(&s->sdmasysad, 0, (uintptr_t)&s->capareg -
(uintptr_t)&s->sdmasysad);
- if (!s->noeject_quirk) {
- /* Reset other state based on current card insertion/readonly status */
- sdhci_set_inserted(dev, sdbus_get_inserted(&s->sdbus));
- sdhci_set_readonly(dev, sdbus_get_readonly(&s->sdbus));
- }
+ /* Reset other state based on current card insertion/readonly status */
+ sdhci_set_inserted(dev, sdbus_get_inserted(&s->sdbus));
+ sdhci_set_readonly(dev, sdbus_get_readonly(&s->sdbus));
s->data_count = 0;
s->stopped_state = sdhc_not_stopped;
@@ -1275,7 +1273,6 @@ static Property sdhci_sysbus_properties[] = {
DEFINE_PROP_UINT32("capareg", SDHCIState, capareg,
SDHC_CAPAB_REG_DEFAULT),
DEFINE_PROP_UINT32("maxcurr", SDHCIState, maxcurr, 0),
- DEFINE_PROP_BOOL("noeject-quirk", SDHCIState, noeject_quirk, false),
DEFINE_PROP_END_OF_LIST(),
};
diff --git a/include/hw/sd/sdhci.h b/include/hw/sd/sdhci.h
index 607a83e..4816516 100644
--- a/include/hw/sd/sdhci.h
+++ b/include/hw/sd/sdhci.h
@@ -76,7 +76,6 @@ typedef struct SDHCIState {
uint32_t buf_maxsz;
uint16_t data_count; /* current element in FIFO buffer */
uint8_t stopped_state;/* Current SDHC state */
- bool noeject_quirk;/* Quirk to disable card insert/remove interrupts */
/* Buffer Data Port Register - virtual access point to R and W buffers */
/* Software Reset Register - always reads as 0 */
/* Force Event Auto CMD12 Error Interrupt Reg - write only */
--
2.5.3
