From: Chen Fan <chen.fan.f...@cn.fujitsu.com>
when boot up a VM that assigning vfio devices with aer enabled, we
must check the vfio device whether support host bus reset. because
when one error occur. OS driver always recover the device by do a
bus reset, in order to recover the vfio device, qemu must able to do
a host bus reset to recover the device to default status. and for all
affected devices by the bus reset. we must check them whether all
are assigned to the VM and on the same virtual bus. meanwhile, for
simply done, the devices which don't affected by the host bus reset
are not allowed to assign to the same virtual bus.
Signed-off-by: Chen Fan <chen.fan.f...@cn.fujitsu.com>
---
hw/vfio/pci.c | 205 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
hw/vfio/pci.h | 1 +
2 files changed, 205 insertions(+), 1 deletion(-)
diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index 8842b7f..dce3b6d 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -38,6 +38,10 @@
static void vfio_disable_interrupts(VFIOPCIDevice *vdev);
static void vfio_mmap_set_enabled(VFIOPCIDevice *vdev, bool enabled);
+#define HOST_CMP_FUNC_MASK (1 << 0)
+static bool vfio_pci_host_match(PCIHostDeviceAddress *addr, const char *name,
+ uint8_t mask);
+
/*
* Disabling BAR mmaping can be slow, but toggling it around INTx can
* also be a huge overhead. We try to get the best of both worlds by
@@ -1877,6 +1881,185 @@ static int vfio_add_std_cap(VFIOPCIDevice *vdev,
uint8_t pos)
return 0;
}
+static void vfio_check_hot_bus_reset(VFIOPCIDevice *vdev, Error **errp)
+{
+ PCIBus *bus = vdev->pdev.bus;
+ struct vfio_pci_hot_reset_info *info = NULL;
+ struct vfio_pci_dependent_device *devices;
+ VFIOGroup *group;
+ int ret, i, devfn;
+
+ ret = vfio_get_hot_reset_info(vdev, &info);
+ if (ret) {
+ error_setg(errp, "vfio: Cannot enable AER for device %s,"
+ " device does not support hot reset.",
+ vdev->vbasedev.name);
+ return;
+ }
+
+ /* List all affected devices by bus reset */
+ devices = &info->devices[0];
+
+ /* Verify that we have all the groups required */
+ for (i = 0; i < info->count; i++) {
+ PCIHostDeviceAddress host;
+ VFIOPCIDevice *tmp;
+ VFIODevice *vbasedev_iter;
+ bool found = false;
+
+ host.domain = devices[i].segment;
+ host.bus = devices[i].bus;
+ host.slot = PCI_SLOT(devices[i].devfn);
+ host.function = PCI_FUNC(devices[i].devfn);
+
+ /* Skip the current device */
+ if (vfio_pci_host_match(&host, vdev->vbasedev.name, 0)) {
+ continue;
+ }
+
+ /* Ensure we own the group of the affected device */
+ QLIST_FOREACH(group, &vfio_group_list, next) {
+ if (group->groupid == devices[i].group_id) {
+ break;
+ }
+ }
+
+ if (!group) {
+ error_setg(errp, "vfio: Cannot enable AER for device %s, "
+ "depends on group %d which is not owned.",
+ vdev->vbasedev.name, devices[i].group_id);
+ goto out;
+ }
+
+ /* Ensure affected devices for reset on the same bus */
+ QLIST_FOREACH(vbasedev_iter, &group->device_list, next) {
+ if (vbasedev_iter->type != VFIO_DEVICE_TYPE_PCI) {
+ continue;
+ }
+ tmp = container_of(vbasedev_iter, VFIOPCIDevice, vbasedev);
+ if (vfio_pci_host_match(&host, tmp->vbasedev.name, 0)) {
+ /*
+ * AER errors may be broadcast to all functions of a multi-
+ * function endpoint. If any of those sibling functions are
+ * also assigned, they need to have AER enabled or else an
+ * error may continue to cause a vm_stop condition. IOW,
+ * AER setup of this function would be pointless.
+ */
+ if (vfio_pci_host_match(&host, vdev->vbasedev.name,
+ HOST_CMP_FUNC_MASK) &&
+ !(tmp->features & VFIO_FEATURE_ENABLE_AER)) {
+ error_setg(errp, "vfio: Cannot enable AER for device %s,
on same slot"
+ " the dependent device %s which does not enable
AER.",
+ vdev->vbasedev.name, tmp->vbasedev.name);
+ goto out;
+ }
+
+ if (tmp->pdev.bus != bus) {
+ error_setg(errp, "vfio: Cannot enable AER for device %s, "
+ "the dependent device %s is not on the same
bus",
+ vdev->vbasedev.name, tmp->vbasedev.name);
+ goto out;
+ }
+ found = true;
+ break;
+ }
+ }
+
+ /* Ensure all affected devices assigned to VM */
+ if (!found) {
+ error_setg(errp, "vfio: Cannot enable AER for device %s, "
+ "the dependent device %04x:%02x:%02x.%x "
+ "is not assigned to VM.",
+ vdev->vbasedev.name, host.domain, host.bus,
+ host.slot, host.function);
+ goto out;
+ }
+ }
+
+ /*
+ * To make things simply, functions must are combined
+ * in the same way as on the host. no other irrelative
+ * functions on the virtual same bus was required.
+ */
+ for (devfn = 0; devfn < 8; devfn++) {
+ VFIOPCIDevice *tmp;
+ PCIDevice *dev;
+ bool found = false;
+
+ dev = pci_find_device(bus, pci_bus_num(bus),
+ PCI_DEVFN(PCI_SLOT(vdev->pdev.devfn), devfn));
+
+ if (!dev) {
+ continue;
+ }
+
+ if (!object_dynamic_cast(OBJECT(dev), "vfio-pci")) {
+ error_setg(errp, "vfio: Cannot enable AER for device %s, "
+ "only support all dependent devices on the same bus, "
+ "%s is not one of the dependent devices.",
+ vdev->vbasedev.name, dev->name);
+ goto out;
+ }
+
+ tmp = DO_UPCAST(VFIOPCIDevice, pdev, dev);
+ for (i = 0; i < info->count; i++) {
+ PCIHostDeviceAddress host;
+
+ host.domain = devices[i].segment;
+ host.bus = devices[i].bus;
+ host.slot = PCI_SLOT(devices[i].devfn);
+ host.function = PCI_FUNC(devices[i].devfn);
+
+ if (vfio_pci_host_match(&host, tmp->vbasedev.name, 0)) {
+ found = true;
+ break;
+ }
+ }
+
+ if (!found) {
+ error_setg(errp, "vfio: Cannot enable AER for device %s, "
+ "only support all dependent devices on the same bus, "
+ "%s is not one of the dependent devices.",
+ vdev->vbasedev.name, tmp->vbasedev.name);
+ goto out;
+ }
+ }
+
+out:
+ g_free(info);
+ return;
+}
+
+static void vfio_aer_check_host_bus_reset(Error **errp)
+{
+ VFIOGroup *group;
+ VFIODevice *vbasedev;
+ VFIOPCIDevice *vdev;
+ Error *local_err = NULL;
+
+ /* Check All vfio-pci devices if have bus reset capability */
+ QLIST_FOREACH(group, &vfio_group_list, next) {
+ QLIST_FOREACH(vbasedev, &group->device_list, next) {
+ if (vbasedev->type != VFIO_DEVICE_TYPE_PCI) {
+ continue;
+ }
+ vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
+ if (vdev->features & VFIO_FEATURE_ENABLE_AER) {
+ if (!pci_get_function_0(&vdev->pdev)) {
+ continue;
+ }
+ vfio_check_hot_bus_reset(vdev, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+ }
+ }
+ }
+
+ return;
+}
+
static int vfio_setup_aer(VFIOPCIDevice *vdev, uint8_t cap_ver,
int pos, uint16_t size)
{
@@ -2060,7 +2243,6 @@ static void vfio_pci_post_reset(VFIOPCIDevice *vdev)
vfio_intx_enable(vdev);
}
-#define HOST_CMP_FUNC_MASK (1 << 0)
static bool vfio_pci_host_match(PCIHostDeviceAddress *addr, const char *name,
uint8_t mask)
{
@@ -2587,6 +2769,22 @@ static void vfio_unregister_req_notifier(VFIOPCIDevice
*vdev)
vdev->req_enabled = false;
}
+static void vfio_pci_machine_done_notify(Notifier *notifier, void *unused)
+{
+ Error *local_err = NULL;
+
+ vfio_aer_check_host_bus_reset(&local_err);
+ if (local_err) {
+ fprintf(stderr, "%s\n", error_get_pretty(local_err));
+ error_free(local_err);
+ exit(1);
+ }
+}
+
+static Notifier machine_notifier = {
+ .notify = vfio_pci_machine_done_notify,
+};
+
static int vfio_initfn(PCIDevice *pdev)
{
VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
@@ -2932,6 +3130,11 @@ static const TypeInfo vfio_pci_dev_info = {
static void register_vfio_pci_dev_type(void)
{
type_register_static(&vfio_pci_dev_info);
+ /*
+ * Register notifier when machine init is done, since we need
+ * check the configration manner after all vfio device are inited.
+ */
+ qemu_add_machine_init_done_notifier(&machine_notifier);
}
type_init(register_vfio_pci_dev_type)
diff --git a/hw/vfio/pci.h b/hw/vfio/pci.h
index 7b3924e..db7c6d5 100644
--- a/hw/vfio/pci.h
+++ b/hw/vfio/pci.h
@@ -15,6 +15,7 @@
#include "qemu-common.h"
#include "exec/memory.h"
#include "hw/pci/pci.h"
+#include "hw/pci/pci_bus.h"
#include "hw/pci/pci_bridge.h"
#include "hw/vfio/vfio-common.h"
#include "qemu/event_notifier.h"
--
1.9.3
