Hi, all, This is v6 for Intel IOMMU IR support. This series introduced quite a few new patches based on v5. Sorry for that (Yes, Jan is contributing to it as well, though most of which are really good ideas for me :). Hopefully we can get its convergence in this version.
To make the review easier, I tried to keep all the existing patches and indexes (also, this is easier for me too to do the modifications, and logically I feel this make more sense and clean, please let me know if I am wrong). Patches 1-18 are v5 patches, and patches 19-26 are newly added patches. All the new patches may need more review, many of them are outside Intel IOMMU scope, and touching other part of codes, which I am still not very sure about. Testing is only covering basic smoke test for the following matrix: - IR enabled/disable - kernel irqchip off/split - network device: tap with/without vhost, e1000 Here's the change log. Please review. Thanks, v6 changes: - patch 10: use write_with_attrs() rather than write(), preparing for SID verification [Jan] - patch 17-18: add r-b line from Radim [Radim] - new patch 19: put together Jan's EIM patch [Jan] - new patch 20: add SID validation process - new patch 21-22: introduce X86IOMMU class, which is the parent of IntelIOMMU class. Patch 21 only introduce the class and did nothing, patch 22 cleaned up all the vtd_*() hooks into x86 ones. This is only a start. In the future, we can abstract more things into X86IOMMU class, like iotlb, address spaces mgmt, etc. [Jan] - new patch 23-25: this is to do IEC notify to all irqfd consumers like vhost/vfio. patch 23 changed interface for kvm_irqchip_add_msi_route(), provide vector info rather than a raw MSI message. Patch 24 added new hooks to do arch-specific notification on addition/deletion of msi routes. Patch 25 is x86 specific, which added one more IEC notifier for msi routes. [Jan] - new patch 26: this is to partially solve the issue that Jan has encountered (1 sec delay when invalidating IR cache). v5 changes: - patch 10: add vector checking for IOAPIC interrupts (this may help debug in the future, will only generate warning if specify IOMMU_DEBUG) - patch 13: replace error_report() with a trace. [Jan] - patch 14: rename parameter "intr" to "intremap", to be aligned with kernel parameter [Jan] - patch 15: fix comments for vtd_iec_notify_fn - patch 17 & 18 (added): fix issue when IR enabled with devices using level-triggered interrupts, like e1000. Adding it to the end of series, since this issue never happen without IR. Patch 17 adds read-only check for IOAPIC entries. Patch 18 clears remote IRR bit when entry configured as edge-triggered. v4 changes (all patch number corresponds to v3): - add one patch at the start of v3 series: I missed to send the first patch in v3. adding it in. [Jan] - patch 9: add support for compatible mode (no reason not to support it, if not, we will get some warnings when using split irqchip) - patch 11: further simplify ioapic_update_kvm_routes() using the helper function. - patch 12: tweak on kvm_arch_fixup_msi_route() rather than ioapic_update_kvm_routes() only. [Radim] - add patch 15: introduce IEC (Interrupt Entry Cache) invalidation notifier list. We can register to this list if we want to be notified when we got IR invalidation requests [Radim] - add patch 16: let IOAPIC the first consumer for the above IEC notifier list. [Radim] - several other trivial fixes (like moving some defines from .c to .h, moving several lines of changes from one patch to another to make it make more sense, etc.) v3 changes (all patch numbers corresponds to v2): - patch 1 (-> v3 patch 13) - move to the end of series [Alex] - patch 10 (dropped) - drop this one, since re-worked on IOAPIC support, so we do not need this any more. - patch 12 (-> v3 patch 10) - leverage MSI path for IOAPIC IR [Jan] - patch 13 (v3 -> patch 9) - remove vtd_interrupt_remap_msi() declaration by reordering the functions [mst] - vtd_generate_msi_message(): init msg using {}, remove FIXME [mst] - new patches - v3 patch 11: introduce ioapic_entry_parse() helper function - v3 patch 12: add support for kernel-irqchip=split. This needs more reviews, logically this should enable lots of things: splitted irqchip, irqfd, vhost, and irqfd support for passthrough devices (not tested). Please refer to the patch for more information. v2 changes: - patch 1 - rename "int_remap" to "intr" in several places [Marcel] - remove "Intel" specific words in desc or commit message, prepare itself with further AMD support [Marcel] - avoid using object_property_get_bool() [Marcel] - patch 5 - use PCI bus number 0xff rather than 0xf0 for the IOAPIC scope definition. (please let me know if anyone knows how I can avoid user using PCI bus number 0xff... TIA) - patch 11 - fix comments [Marcel] - all - remove intr_supported variable [Marcel] This patchset provide very basic functionalities for interrupt remapping (IR) support of the emulated Intel IOMMU device. By default, IR is disabled to be better compatible with current QEMU. To enable IR, we can using the following command to boot a IR-supported VM with virtio-net device with vhost (still do not support kvm-ioapic, so we need to specify kernel-irqchip={split|off} here): $ qemu-system-x86_64 -M q35,iommu=on,intr=on,kernel-irqchip=split \ -enable-kvm -m 1024 \ -netdev tap,id=net0,vhost=on \ -device virtio-net-pci,netdev=user.0 \ -monitor telnet::3333,server,nowait \ /var/lib/libvirt/images/vm1.qcow2 When guest boots, we can verify whether IR enabled by grepping the dmesg like: Feb 19 11:21:23 localhost.localdomain kernel: DMAR-IR: IOAPIC id 0 under DRHD base 0xfed90000 IOMMU 0 Feb 19 11:21:23 localhost.localdomain kernel: DMAR-IR: Enabled IRQ remapping in x2apic mode Currently supported: - Emulated/Splitted irqchip - Generic PCI Devices - vhost devices - pass through device support? Not tested, but suppose it should work. - IEC (Interrupt Entry Cache) cache invalidation notification - EIM (from Jan) - IRTE Source-id validation TODO List: - explicit IEC invalidation (currently, we do update without checking. Also, we can process QI invalidation in bulk, as Jan suggested) - IR fault reporting - migration support (for IOMMU as general?) - more? Jan Kiszka (1): intel_iommu: Add support for Extended Interrupt Mode Peter Xu (25): acpi: enable INTR for DMAR report structure intel_iommu: allow queued invalidation for IR intel_iommu: set IR bit for ECAP register acpi: add DMAR scope definition for root IOAPIC intel_iommu: define interrupt remap table addr register intel_iommu: handle interrupt remap enable intel_iommu: define several structs for IOMMU IR intel_iommu: provide helper function vtd_get_iommu intel_iommu: add IR translation faults defines intel_iommu: Add support for PCI MSI remap q35: ioapic: add support for emulated IOAPIC IR ioapic: introduce ioapic_entry_parse() helper intel_iommu: add support for split irqchip q35: add "intremap" parameter to enable IR intel_iommu: introduce IEC notifiers ioapic: register VT-d IEC invalidate notifier ioapic: keep RO bits for IOAPIC entry ioapic: clear remote irr bit for edge-triggered interrupts intel_iommu: add SID validation for IR x86-iommu: introduce parent class x86-iommu: replace existing VT-d hooks into X86 ones kvm-irqchip: simplify kvm_irqchip_add_msi_route kvm-irqchip: i386: add hook for add/remove virq kvm-irqchip: x86: add msi route notify fn kvm-irqchip: do explicit commit when update irq hw/core/machine.c | 22 ++ hw/i386/Makefile.objs | 2 +- hw/i386/acpi-build.c | 38 ++-- hw/i386/intel_iommu.c | 429 +++++++++++++++++++++++++++++++++++++- hw/i386/intel_iommu_internal.h | 49 ++++- hw/i386/kvm/pci-assign.c | 10 +- hw/i386/pc.c | 3 + hw/i386/x86-iommu.c | 91 ++++++++ hw/intc/ioapic.c | 158 ++++++++++---- hw/misc/ivshmem.c | 4 +- hw/pci-host/q35.c | 17 +- hw/pci/pci.c | 15 ++ hw/vfio/pci.c | 12 +- hw/virtio/virtio-pci.c | 10 +- include/hw/acpi/acpi-defs.h | 15 ++ include/hw/boards.h | 1 + include/hw/i386/apic-msidef.h | 1 + include/hw/i386/intel_iommu.h | 147 ++++++++++++- include/hw/i386/ioapic_internal.h | 6 + include/hw/i386/pc.h | 4 + include/hw/i386/x86-iommu.h | 110 ++++++++++ include/hw/pci-host/q35.h | 9 + include/hw/pci/pci.h | 2 + include/sysemu/kvm.h | 21 +- kvm-all.c | 14 +- kvm-stub.c | 6 +- target-arm/kvm.c | 11 + target-i386/kvm.c | 98 ++++++++- target-mips/kvm.c | 11 + target-ppc/kvm.c | 11 + target-s390x/kvm.c | 11 + trace-events | 6 + 32 files changed, 1232 insertions(+), 112 deletions(-) create mode 100644 hw/i386/x86-iommu.c create mode 100644 include/hw/i386/x86-iommu.h -- 2.4.11