On 2 April 2016 at 15:29, Jean-Christophe Dubois <j...@tribudubois.net> wrote: > This patch series adds support for the Freescale i.MX6 processor. > > For now we only support the following devices: > * up to 4 Cortex A9 cores > * A9 MPCORE (SCU, GIC, TWD) > * 5 i.MX UARTs > * 2 EPIT timers > * 1 GPT timer > * 7 GPIO controllers > * 6 SDHC controllers > * 5 SPI controllers > * 1 CCM device > * 1 SRC device > * 3 I2C devices > * various ROM/RAM areas. > > This also adds the sabrelite board as a an actual platform for i.MX6. > > This series was tested by booting a 4.4 linux kernel (using the > imx_v6_v7_defconfig file as kernel configuration). > > Note1: as sabrelite uses uart2 as console, you have to redirect the second > QEMU serial port to stdout. > qemu-system-arm -M sabrelite -display none ... -serial null -serial stdio > > Note2: You need to disable the GPIO section related to physical push buttons > in the Linux DTS tree in order to avoid excecive interrupt triggering on > GPIO devices for non existant buttons.
Applied to target-arm.next, thanks. -- PMM