On Fri, Sep 09, 2016 at 02:42:41AM +0000, Gonglei (Arei) wrote: > Hi Michael, > > > > -----Original Message----- > > From: Michael S. Tsirkin [mailto:m...@redhat.com] > > Sent: Friday, September 09, 2016 12:44 AM > > Subject: Re: [PATCH v9 1/2] virtio-crypto: Add virtio crypto device > > specification > > > > On Thu, Sep 08, 2016 at 06:05:14PM +0800, Gonglei wrote: > > > The virtio crypto device is a virtual crypto device (ie. hardware > > > crypto accelerator card). The virtio crypto device can provide > > > five crypto services: CIPHER, MAC, HASH, AEAD, KDF, ASYM, PRIMITIVE. > > > > > > In this patch, CIPHER, MAC, HASH, AEAD services are introduced. > > > > > > Signed-off-by: Gonglei <arei.gong...@huawei.com> > > > CC: Michael S. Tsirkin <m...@redhat.com> > > > CC: Cornelia Huck <cornelia.h...@de.ibm.com> > > > CC: Stefan Hajnoczi <stefa...@redhat.com> > > > CC: Lingli Deng <denglin...@chinamobile.com> > > > CC: Jani Kokkonen <jani.kokko...@huawei.com> > > > CC: Ola Liljedahl <ola.liljed...@arm.com> > > > CC: Varun Sethi <varun.se...@freescale.com> > > > CC: Zeng Xin <xin.z...@intel.com> > > > CC: Keating Brian <brian.a.keat...@intel.com> > > > CC: Ma Liang J <liang.j...@intel.com> > > > CC: Griffin John <john.grif...@intel.com> > > > CC: Hanweidong <hanweid...@huawei.com> > > > CC: Mihai Claudiu Caraman <mike.cara...@nxp.com> > > > > I mostly looked at the conformance clauses. > > Here are some comments worth addressing. > > > Good, Thanks ! > > > Thanks! > > > > > --- > > > content.tex | 2 + > > > virtio-crypto.tex | 926 > > ++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > > 2 files changed, 928 insertions(+) > > > create mode 100644 virtio-crypto.tex > > > > > > diff --git a/content.tex b/content.tex > > > index 4b45678..ab75f78 100644 > > > --- a/content.tex > > > +++ b/content.tex > > > @@ -5750,6 +5750,8 @@ descriptor for the \field{sense_len}, > > \field{residual}, > > > \field{status_qualifier}, \field{status}, \field{response} and > > > \field{sense} fields. > > > > > > +\input{virtio-crypto.tex} > > > + > > > \chapter{Reserved Feature Bits}\label{sec:Reserved Feature Bits} > > > > > > Currently there are three device-independent feature bits defined: > > > diff --git a/virtio-crypto.tex b/virtio-crypto.tex > > > new file mode 100644 > > > index 0000000..eec4741 > > > --- /dev/null > > > +++ b/virtio-crypto.tex > > > @@ -0,0 +1,926 @@ > > > +\section{Crypto Device}\label{sec:Device Types / Crypto Device} > > > + > > > +The virtio crypto device is a virtual crypto device, and is a kind of > > > +virtual hardware accelerator for virtual machines. The encryption and > > > +decryption requests are placed in the data queue, and handled by the > > > +real crypto accelerators finally. The second queue is the control queue, > > > +which is used to create or destroy sessions for symmetric algorithms, and > > > +control some advanced features in the future. The virtio crypto > > > +device can provide seven crypto services: CIPHER, MAC, HASH, AEAD, > > > +KDF, ASYM, PRIMITIVE. > > > + > > > +\subsection{Device ID}\label{sec:Device Types / Crypto Device / Device > > > ID} > > > + > > > +20 > > > + > > > +\subsection{Virtqueues}\label{sec:Device Types / Crypto Device / > > Virtqueues} > > > + > > > +\begin{description} > > > +\item[0] dataq1 > > > +\item[\ldots] > > > +\item[N-1] dataqN > > > +\item[N] controlq > > > +\end{description} > > > + > > > +N is set by \field{max_dataqueues}. > > > + > > > +\subsection{Feature bits}\label{sec:Device Types / Crypto Device / > > > Feature > > bits} > > > + None currently defined > > > + > > > +\subsection{Device configuration layout}\label{sec:Device Types / Crypto > > Device / Device configuration layout} > > > + > > > +The following driver-read-only configuration fields are currently > > > defined. > > > + > > > +\begin{lstlisting} > > > +struct virtio_crypto_config { > > > + le32 status; > > > + le32 max_dataqueues; > > > + le32 crypto_services; > > > + /* detailed algorithms mask */ > > > + le32 cipher_algo_l; > > > + le32 cipher_algo_h; > > > + le32 hash_algo; > > > + le32 mac_algo_l; > > > + le32 mac_algo_h; > > > + le32 asym_algo; > > > + le32 kdf_algo; > > > + le32 aead_algo; > > > + le32 primitive_algo; > > > +}; > > > +\end{lstlisting} > > > + > > > +The first field, \field{status} is currently defined: > > VIRTIO_CRYPTO_S_HW_READY > > > +and VIRTIO_CRYPTO_S_STARTED. > > > + > > > +\begin{lstlisting} > > > +#define VIRTIO_CRYPTO_S_HW_READY (1 << 0) > > > +#define VIRTIO_CRYPTO_S_STARTED (1 << 1) > > > +\end{lstlisting} > > > + > > > +The following driver-read-only field, \field{max_dataqueuess} specifies > > > the > > > +maximum number of data virtqueues (dataq1\ldots dataqN). The > > \field{crypto_services} > > > +shows the crypto service the virtio crypto supports. The service > > > currently > > > +defined are: > > > > I'm not a native english speaker myself but I can tell there are some > > mistakes in english in this text. Could you pls get a native speaker go > > over the text for you? We'll likely get it corrected during public > > review anyway, but it's better to fix them early. > > > Yes, you are right. I'll do this thing before next version's publication, > hope it's not too late. :) > > > > > + > > > +\begin{lstlisting} > > > +#define VIRTIO_CRYPTO_SERVICE_CIPHER (0) /* cipher service */ > > > +#define VIRTIO_CRYPTO_SERVICE_HASH (1) /* hash service */ > > > > You write cipher and hash here, but elsewhere in text you > > refer to them as CIPHER and HASH. > > > > > +#define VIRTIO_CRYPTO_SERVICE_MAC (2) /* MAC (Message > > Authentication Codes) service */ > > > +#define VIRTIO_CRYPTO_SERVICE_AEAD (3) /* AEAD (Authenticated > > Encryption with Associated Data) service */ > > > +\end{lstlisting} > > > + > > > +The last driver-read-only fields specify detailed algorithms masks which > > > +the device offers for corresponding services. The below CIPHER algorithms > > > +are defined currently: > > > > ... are currently defined > > Similarly "finally" etc elsewhere. > > Or better just drop "currently", it adds no value, here and > > elsewhere. > > > OK, drop it. > > > > > > + > > > +\begin{lstlisting} > > > +#define VIRTIO_CRYPTO_NO_CIPHER 0 > > > +#define VIRTIO_CRYPTO_CIPHER_ARC4 1 > > > +#define VIRTIO_CRYPTO_CIPHER_AES_ECB 2 > > > +#define VIRTIO_CRYPTO_CIPHER_AES_CBC 3 > > > +#define VIRTIO_CRYPTO_CIPHER_AES_CTR 4 > > > +#define VIRTIO_CRYPTO_CIPHER_DES_ECB 5 > > > +#define VIRTIO_CRYPTO_CIPHER_DES_CBC 6 > > > +#define VIRTIO_CRYPTO_CIPHER_3DES_ECB 7 > > > +#define VIRTIO_CRYPTO_CIPHER_3DES_CBC 8 > > > +#define VIRTIO_CRYPTO_CIPHER_3DES_CTR 9 > > > +#define VIRTIO_CRYPTO_CIPHER_KASUMI_F8 10 > > > +#define VIRTIO_CRYPTO_CIPHER_SNOW3G_UEA2 11 > > > +#define VIRTIO_CRYPTO_CIPHER_AES_F8 12 > > > +#define VIRTIO_CRYPTO_CIPHER_AES_XTS 13 > > > +#define VIRTIO_CRYPTO_CIPHER_ZUC_EEA3 14 > > > +\end{lstlisting} > > > + > > > +The below HASH algorithms are defined currently: > > > + > > > +\begin{lstlisting} > > > +#define VIRTIO_CRYPTO_NO_HASH 0 > > > +#define VIRTIO_CRYPTO_HASH_MD5 1 > > > +#define VIRTIO_CRYPTO_HASH_SHA1 2 > > > +#define VIRTIO_CRYPTO_HASH_SHA_224 3 > > > +#define VIRTIO_CRYPTO_HASH_SHA_256 4 > > > +#define VIRTIO_CRYPTO_HASH_SHA_384 5 > > > +#define VIRTIO_CRYPTO_HASH_SHA_512 6 > > > +#define VIRTIO_CRYPTO_HASH_SHA3_224 7 > > > +#define VIRTIO_CRYPTO_HASH_SHA3_256 8 > > > +#define VIRTIO_CRYPTO_HASH_SHA3_384 9 > > > +#define VIRTIO_CRYPTO_HASH_SHA3_512 10 > > > +#define VIRTIO_CRYPTO_HASH_SHA3_SHAKE128 11 > > > +#define VIRTIO_CRYPTO_HASH_SHA3_SHAKE256 12 > > > +\end{lstlisting} > > > + > > > +The below MAC algorithms are defined currently: > > > + > > > +\begin{lstlisting} > > > +#define VIRTIO_CRYPTO_NO_MAC 0 > > > +#define VIRTIO_CRYPTO_MAC_HMAC_MD5 1 > > > +#define VIRTIO_CRYPTO_MAC_HMAC_SHA1 2 > > > +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_224 3 > > > +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_256 4 > > > +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_384 5 > > > +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_512 6 > > > +#define VIRTIO_CRYPTO_MAC_CMAC_3DES 25 > > > +#define VIRTIO_CRYPTO_MAC_CMAC_AES 26 > > > +#define VIRTIO_CRYPTO_MAC_KASUMI_F9 27 > > > +#define VIRTIO_CRYPTO_MAC_SNOW3G_UIA2 28 > > > +#define VIRTIO_CRYPTO_MAC_GMAC_AES 41 > > > +#define VIRTIO_CRYPTO_MAC_GMAC_TWOFISH 42 > > > +#define VIRTIO_CRYPTO_MAC_CBCMAC_AES 49 > > > +#define VIRTIO_CRYPTO_MAC_CBCMAC_KASUMI_F9 50 > > > +#define VIRTIO_CRYPTO_MAC_XCBC_AES 53 > > > +#define VIRTIO_CRYPTO_MAC_ZUC_EIA3 54 > > > +\end{lstlisting} > > > + > > > +The below AEAD algorithms are defined currently: > > > + > > > +\begin{lstlisting} > > > +#define VIRTIO_CRYPTO_NO_AEAD 0 > > > +#define VIRTIO_CRYPTO_AEAD_GCM 1 > > > +#define VIRTIO_CRYPTO_AEAD_CCM 2 > > > +#define VIRTIO_CRYPTO_AEAD_CHACHA20_POLY1305 3 > > > +\end{lstlisting} > > > > Maybe clarify that more will be defined in the future, > OK. > > > and that drivers are expected to ignore the algorithms they > > do not know how to handle. > > > We can add this in the driver requirement section. > > > > + > > > +\devicenormative{\subsection}{Device Requirements: Device configuration > > layout}\label{sec:Device Types / Crypto Device / Device configuration > > layout / > > Device Requirements: Device configuration layout} > > > + > > > +\begin{itemize*} > > > +\item The device MUST set \field{max_dataqueues} to between 1 and 65535 > > inclusive. > > > +\item The device SHOULD set \field{status} according to the status of the > > hardware-backed implementation. > > > > Is the requirement here to be able to handle some activity > > once ready is set? which exactly? > > > I mean that the 'ready' status shows the device is active, > otherwise the driver assumes it's not active.
Yes but what does active mean? What should it be able to do as opposed to when it is inactive? you should explain that. > > > +\item The device MUST set \field{crypto_services} according to the crypto > > services which the device offered. > > > > Why offered in the past? Generally please try to use the simple tense as > > much as possible. > > > OK. > > > > +\item The device MUST set detailed algorithms mask according to > > \field{crypto_services} field. > > > > and what does this mean? > > > The device MUST set corresponding algorithms masks according to > \field{crypto_services} field. > > > > +\end{itemize*} > > > + > > > +\drivernormative{\subsection}{Driver Requirements: Device configuration > > layout}\label{sec:Device Types / Crypto Device / Device configuration > > layout / > > Driver Requirements: Device configuration layout} > > > + > > > +\begin{itemize*} > > > +\item The driver MUST read the ready \field{status} from the bottom bit > > > of > > status to > > > + check whether the hardware-backed implementation is ready or not. > > > > And then what? What is and what is not legal to do before ready is set? > > Is it legal to access any other fields before ready is set? > > > I mean that the 'ready' status shows the device is active, > otherwise the driver assumes it's not active. But the driver can also > read any other fields though ready is not set. So it can read any field but must not submit any requests on data or control queue? Is that it? > > Also, does ready get cleared on reset? Does driver have to > > re-read it after reset? > > > Yes, I think so. Spec should probably say this. > > > +\item The driver MAY read \field{max_dataqueues} field to discover how > > many data queues the device supports. > > > > looks more like a device requirement to me > > > Yes. Drop it here. > > > > +\item The driver MUST read \field{crypto_services} field to discover > > > which > > services the device is able to offer. > > > +\item The driver MUST read the detailed \field{algorithms} field > > > according to > > \field{crypto_services} field. > > > > Is the requirement that drivers MUST ignore > > algorithms that they do not know how to handle? > > If yes say so. > > > Yes. > > > > > > +\end{itemize*} > > > + > > > +\subsection{Device Initialization}\label{sec:Device Types / Crypto > > > Device / > > Device Initialization} > > > + > > > +\subsubsection{Driver Requirements: Device > > > Initialization}\label{sec:Device > > Types / Crypto Device / Device Initialization / Driver Requirements: Device > > Initialization} > > > + > > > +\begin{itemize*} > > > +\item The driver MUST identify and initialize up to > > > \field{max_dataqueues} > > data virtqueues. > > > +\item The driver MUST identify the control virtqueue. > > > > identify and then what? is it required to initialize it? > > > Sure, the driver must initialize the control virtqueue. I'll add the > "initialize" word. > > > > +\item The driver MUST identify the ready status of hardware-backend from > > \field{status} field. > > > > How is this different from requirement above? > > > No, drop it here. > > > > +\item The driver MUST read the supported crypto services from bits of > > \field{crypto_servies}. > > > > Do we really need it to read them? When? > > Probably the real requirement is not to use any not listed in > > crypto_services? > > > Yes. My original thought is the driver need to read the crypto_services > field, then > it can know what the device supply, then it can do register the crypto > services/algos to > kernel space or user space cryptographic framework. > > > > +\item The driver MUST read the supported algorithms according to > > \field{crypto_services} field. > > > > Same question. > > > > > +\end{itemize*} > > > + > > > +\subsubsection{Device Requirements: Device > > > Initialization}\label{sec:Device > > Types / Crypto Device / Device Initialization / Device Requirements: Device > > Initialization} > > > + > > > +\begin{itemize*} > > > +\item The device MUST be configured at least one accelerator which > > executes real crypto operations. > > > +\item The device MUST write the \field{crypto_services} field according > > > to > > the capacities of the backend accelerator. > > > +\end{itemize*} > > > + > > > +\subsection{Device Operation}\label{sec:Device Types / Crypto Device / > > Device Operation} > > > + > > > +Packets can be transmitted by placing them in both the controlq and > > > dataq. > > > +Packets consist of a generic header and a service-specific request. > > > +Where 'general header' is for all crypto requests, 'service specific > > > requests' > > > +are composed of operation parameter + output data + input data in > > > general. > > > +Operation parameters are algorithm-specific parameters, output data is > > > the > > > +data should be operated, input data is the "operation result + result > > > buffer". > > > +The general header of controlq: > > > + > > > +\begin{lstlisting} > > > +#define VIRTIO_CRYPTO_OPCODE(service, op) ((service << 8) | (op)) > > > + > > > +struct virtio_crypto_ctrl_header { > > > +#define VIRTIO_CRYPTO_CIPHER_CREATE_SESSION \ > > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, > > 0x02) > > > +#define VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION \ > > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, > > 0x03) > > > +#define VIRTIO_CRYPTO_HASH_CREATE_SESSION \ > > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x02) > > > +#define VIRTIO_CRYPTO_HASH_DESTROY_SESSION \ > > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x03) > > > +#define VIRTIO_CRYPTO_MAC_CREATE_SESSION \ > > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x02) > > > +#define VIRTIO_CRYPTO_MAC_DESTROY_SESSION \ > > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x03) > > > +#define VIRTIO_CRYPTO_AEAD_CREATE_SESSION \ > > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x02) > > > +#define VIRTIO_CRYPTO_AEAD_DESTROY_SESSION \ > > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x03) > > > + __virtio32 opcode; > > > + __virtio32 algo; > > > + __virtio32 flag; > > > + /* data virtqueue id */ > > > + __virtio32 queue_id; > > > +}; > > > +\end{lstlisting} > > > + > > > +The general header of dataq: > > > + > > > +\begin{lstlisting} > > > +struct virtio_crypto_op_header { > > > +#define VIRTIO_CRYPTO_CIPHER_ENCRYPT \ > > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x00) > > > +#define VIRTIO_CRYPTO_CIPHER_DECRYPT \ > > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x01) > > > +#define VIRTIO_CRYPTO_HASH \ > > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x00) > > > +#define VIRTIO_CRYPTO_MAC \ > > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x00) > > > +#define VIRTIO_CRYPTO_AEAD_ENCRYPT \ > > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x00) > > > +#define VIRTIO_CRYPTO_AEAD_DECRYPT \ > > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x01) > > > + __virtio32 opcode; > > > + /* algo should be service-specific algorithms */ > > > + __virtio32 algo; > > > + /* session_id should be service-specific algorithms */ > > > + __virtio64 session_id; > > > + /* control flag to control the request */ > > > + __virtio32 flag; > > > + __virtio32 padding; > > > +}; > > > +\end{lstlisting} > > > + > > > +The device CAN set the status of operation as follows: > > > > Please do not capitalize CAN - I don't think CAN is an RFC 2119 keyword. > > Also FYI text using RFC 2119 keywords should go into conformance statements, > > other text should avoid them to avoid confusion. > > > OK, thanks for your information. :) > > > > > > VIRTIO_CRYPTO_OP_OK for success, > > > +VIRTIO_CRYPTO_OP_ERR for failure or device error, > > VIRTIO_CRYPTO_OP_NOTSUPP for not support, > > > +VIRTIO_CRYPTO_OP_INVSESS for invalid session id when executing crypto > > operations. > > > + > > > +\begin{lstlisting} > > > +#define VIRTIO_CRYPTO_OP_OK 0 > > > +#define VIRTIO_CRYPTO_OP_ERR 1 > > > +#define VIRTIO_CRYPTO_OP_BADMSG 2 > > > +#define VIRTIO_CRYPTO_OP_NOTSUPP 3 > > > +#define VIRTIO_CRYPTO_OP_INVSESS 4 > > > +\end{lstlisting} > > > + > > > +\subsubsection{Control Virtqueue}\label{sec:Device Types / Crypto Device > > > / > > Device Operation / Control Virtqueue} > > > + > > > +The driver uses the control virtqueue to send control commands to the > > > +device which handles the non-data plane operations, such as session > > > +operations (See \ref{sec:Device Types / Crypto Device / Device Operation > > > / > > Control Virtqueue / Session operation}). > > > +The packet of controlq: > > > + > > > +\begin{lstlisting} > > > +struct virtio_crypto_op_ctrl_req { > > > + struct virtio_crypto_ctrl_header header; > > > + > > > + union { > > > + struct virtio_crypto_sym_create_session_req > > sym_create_session; > > > + struct virtio_crypto_hash_create_session_req > > hash_create_session; > > > + struct virtio_crypto_mac_create_session_req > > mac_create_session; > > > + struct virtio_crypto_aead_create_session_req > > aead_create_session; > > > + struct virtio_crypto_destroy_session_req destroy_session; > > > + } u; > > > +}; > > > +\end{lstlisting} > > > + > > > +The header is the general header, the union is an algorithm-specific > > > type, > > > +which is set by the driver. All the properties in the union will be > > > shown as > > follows. > > > + > > > +\paragraph{Session operation}\label{sec:Device Types / Crypto Device / > > Device Operation / Control Virtqueue / Session operation} > > > + > > > +The symmetric algorithms have the concept of sessions. A session is a > > > +handle which describes the cryptographic parameters to be applied to > > > +a number of buffers. The data within a session handle includes the > > > following: > > > + > > > +\begin{enumerate} > > > +\item The operation (cipher, hash/mac or both, and if both, the order in > > > + which the algorithms should be applied). > > > +\item The cipher set data, including the cipher algorithm and mode, > > > + the key and its length, and the direction (encrypt or decrypt). > > > +\item The hash/mac setup data, including the hash algorithm or mac > > algorithm, > > > + and digest result length (to allow for truncation). > > > +\begin{itemize*} > > > +\item Authenticated mode can refer to MAC, which requires that the key > > and > > > + its length are also specified. > > > +\item For nested mode, the inner and outer prefix data and length are > > specified, > > > + as well as the outer hash algorithm. > > > +\end{itemize*} > > > +\end{enumerate} > > > + > > > +The below structure store the result of session creation which is set by > > > the > > device: > > > + > > > +\begin{lstlisting} > > > +struct virtio_crypto_session_input { > > > + /* Device-writable part */ > > > + __virtio64 session_id; > > > + __virtio32 status; > > > + __virtio32 padding; > > > +}; > > > +\end{lstlisting} > > > + > > > +A request which destroy a session including the following information: > > > + > > > +\begin{lstlisting} > > > +struct virtio_crypto_destroy_session_req { > > > + /* Device-readable part */ > > > + __virtio64 session_id; > > > + /* Device-writable part */ > > > + __virtio32 status; > > > + __virtio32 padding; > > > +}; > > > +\end{lstlisting} > > > + > > > +\subparagraph{Session operation: HASH session}\label{sec:Device Types / > > Crypto Device / Device > > > +Operation / Control Virtqueue / Session operation / Session operation: > > > HASH > > session} > > > + > > > +The packet of HASH session is: > > > + > > > +\begin{lstlisting} > > > +struct virtio_crypto_hash_session_para { > > > + /* See VIRTIO_CRYPTO_HASH_* above */ > > > + le32 algo; > > > + /* hash result length */ > > > + le32 hash_result_len; > > > +}; > > > +struct virtio_crypto_hash_create_session_req { > > > + /* Device-readable part */ > > > + struct virtio_crypto_hash_session_para para; > > > + /* Device-writable part */ > > > + struct virtio_crypto_session_input input; > > > +}; > > > +\end{lstlisting} > > > + > > > +\subparagraph{Session operation: MAC session}\label{sec:Device Types / > > Crypto Device / Device > > > +Operation / Control Virtqueue / Session operation / Session operation: > > > MAC > > session} > > > + > > > +The packet of MAC session is: > > > + > > > +\begin{lstlisting} > > > +struct virtio_crypto_mac_session_para { > > > + /* See VIRTIO_CRYPTO_MAC_* above */ > > > + le32 algo; > > > + /* hash result length */ > > > + le32 hash_result_len; > > > + /* length of authenticated key */ > > > + le32 auth_key_len; > > > + __virtio32 padding; > > > +}; > > > +struct virtio_crypto_mac_session_output { > > > + __virtio64 auth_key_addr; /* guest key physical address */ > > > +}; > > > + > > > +struct virtio_crypto_mac_create_session_req { > > > + /* Device-readable part */ > > > + struct virtio_crypto_mac_session_para para; > > > + struct virtio_crypto_mac_session_output out; > > > + /* Device-writable part */ > > > + struct virtio_crypto_session_input input; > > > +}; > > > +\end{lstlisting} > > > + > > > +\subparagraph{Session operation: Symmetric algorithms > > session}\label{sec:Device Types / Crypto Device / Device > > > +Operation / Control Virtqueue / Session operation / Session operation: > > Symmetric algorithms session} > > > + > > > +The request of symmetric session includes two parts, CIPHER algorithms > > and chain > > > +algorithms (chaining cipher and hash/mac). The packet of CIPHER session > > > is: > > > + > > > +\begin{lstlisting} > > > +struct virtio_crypto_cipher_session_para { > > > + /* See VIRTIO_CRYPTO_CIPHER* above */ > > > + le32 algo; > > > + /* length of key */ > > > + le32 keylen; > > > +#define VIRTIO_CRYPTO_OP_ENCRYPT 1 > > > +#define VIRTIO_CRYPTO_OP_DECRYPT 2 > > > + /* encrypt or decrypt */ > > > + le32 op; > > > + le32 padding; > > > +}; > > > + > > > +struct virtio_crypto_cipher_session_output { > > > + __virtio64 key_addr; /* guest key physical address */ > > > +}; > > > + > > > +struct virtio_crypto_cipher_session_req { > > > + struct virtio_crypto_cipher_session_para para; > > > + struct virtio_crypto_cipher_session_output out; > > > + struct virtio_crypto_session_input input; > > > +}; > > > +\end{lstlisting} > > > + > > > +The packet of algorithm chaining is: > > > + > > > +\begin{lstlisting} > > > +struct virtio_crypto_alg_chain_session_para { > > > +#define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_HASH_THEN_CIPHER > > 1 > > > +#define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_CIPHER_THEN_HASH > > 2 > > > + __virtio32 alg_chain_order; > > > +/* Plain hash */ > > > +#define VIRTIO_CRYPTO_SYM_HASH_MODE_PLAIN 1 > > > +/* Authenticated hash (mac) */ > > > +#define VIRTIO_CRYPTO_SYM_HASH_MODE_AUTH 2 > > > +/* Nested hash */ > > > +#define VIRTIO_CRYPTO_SYM_HASH_MODE_NESTED 3 > > > + __virtio32 hash_mode; > > > + struct virtio_crypto_cipher_session_para cipher_param; > > > + union { > > > + struct virtio_crypto_hash_session_para hash_param; > > > + struct virtio_crypto_mac_session_para mac_param; > > > + } u; > > > + /* length of the additional authenticated data (AAD) in bytes */ > > > + __virtio32 aad_len; > > > + __virtio32 padding; > > > +}; > > > + > > > +struct virtio_crypto_alg_chain_session_output { > > > + struct virtio_crypto_cipher_session_output cipher; > > > + struct virtio_crypto_mac_session_output mac; > > > +}; > > > + > > > +struct virtio_crypto_alg_chain_session_req { > > > + struct virtio_crypto_alg_chain_session_para para; > > > + struct virtio_crypto_alg_chain_session_output out; > > > + struct virtio_crypto_session_input input; > > > +}; > > > +\end{lstlisting} > > > + > > > +The packet of symmetric algorithm is: > > > + > > > +\begin{lstlisting} > > > +struct virtio_crypto_sym_create_session_req { > > > + union { > > > + struct virtio_crypto_cipher_session_req cipher; > > > + struct virtio_crypto_alg_chain_session_req chain; > > > + } u; > > > + > > > + /* Device-readable part */ > > > + > > > +/* No operation */ > > > +#define VIRTIO_CRYPTO_SYM_OP_NONE 0 > > > +/* Cipher only operation on the data */ > > > +#define VIRTIO_CRYPTO_SYM_OP_CIPHER 1 > > > +/* Chain any cipher with any hash or mac operation. The order > > > + depends on the value of alg_chain_order param */ > > > +#define VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING 2 > > > + __virtio32 op_type; > > > + __virtio32 padding; > > > +}; > > > +\end{lstlisting} > > > + > > > +\subparagraph{Session operation: AEAD session}\label{sec:Device Types / > > Crypto Device / Device > > > +Operation / Control Virtqueue / Session operation / Session operation: > > > AEAD > > session} > > > + > > > +The packet of AEAD session is: > > > + > > > +\begin{lstlisting} > > > +struct virtio_crypto_aead_session_para { > > > + /* See VIRTIO_CRYPTO_AEAD_* above*/ > > > + le32 algo; > > > + /* length of key */ > > > + le32 key_len; > > > + /* digest result length */ > > > + le32 digest_result_len; > > > + /* The length of the additional authenticated data (AAD) in bytes */ > > > + le32 aad_len; > > > + /* encrypt or decrypt, See above VIRTIO_CRYPTO_OP_* */ > > > + le32 op; > > > + le32 padding; > > > +}; > > > + > > > +struct virtio_crypto_aead_session_output { > > > + __virtio64 key_addr; /* guest key phycial address */ > > > +}; > > > + > > > +struct virtio_crypto_aead_create_session_req { > > > + struct virtio_crypto_aead_session_para para; > > > + struct virtio_crypto_aead_session_output out; > > > + struct virtio_crypto_session_input input; > > > +}; > > > +\end{lstlisting} > > > + > > > +\drivernormative{\subparagraph}{Session operation: create > > session}\label{sec:Device Types / Crypto Device / Device > > > +Operation / Control Virtqueue / Session operation / Session operation: > > create session / Driver Requirements: Session operation: create session} > > > + > > > +The driver MUST set the control general header and corresponding property > > > +of union in structure virtio_crypto_op_ctrl_req. See \ref{sec:Device > > > Types / > > Crypto Device / Device Operation / Control Virtqueue}. > > > +Take the example of MAC service, the driver MUST set > > VIRTIO_CRYPTO_MAC_CREATE_SESSION > > > +for \field{opcode} field in struct virtio_crypto_op_ctrl_req, and set the > > \field{queue_id} > > > +to show dataq used. > > > + > > > +\devicenormative{\subparagraph}{Session operation: create > > session}\label{sec:Device Types / Crypto Device / Device > > > +Operation / Control Virtqueue / Session operation / Session operation: > > create session / Device Requirements: Session operation: create session} > > > + > > > +The device MUST return a session identifier to the driver when the device > > > +finishes the processing of session creation. The session creation request > > > +MUST end by a \field{status} field and a \field{session_id} field: > > > > Pls reword to say "device MUST ..." > > > OK. > > > > + > > > +Both > > > > should be lower case both after : > > > > >\field{status} and \field{session_id} are written by the device: either > > VIRTIO_CRYPTO_OP_OK for success, > > > +VIRTIO_CRYPTO_OP_ERR for creation failed or device error, > > VIRTIO_CRYPTO_OP_NOTSUPP for not support, > > > +VIRTIO_CRYPTO_OP_INVSESS for invalid session id when executing crypto > > operations. > > > + > > > +\drivernormative{\subparagraph}{Session operation: destroy > > session}\label{sec:Device Types / Crypto Device / Device > > > +Operation / Control Virtqueue / Session operation / Session operation: > > destroy session / Driver Requirements: Session operation: destroy session} > > > + > > > +The driver MUST set the control general header and corresponding property > > > +of union in struct virtio_crypto_op_ctrl_req. See \ref{sec:Device Types / > > Crypto Device / Device Operation / Control Virtqueue}. > > > +Take the example of MAC service, > > > > This isn't the place for examples. Either list all requirements or drop > > this. > > > Can I use " \begin{note} ... \end{note}" for this example at the end of > section? > Just like virtio-net Device Initialization section. You can but I think it's better to add examples elsewhere, outside conformance sections. There might be a bit of text duplication. > > > the driver MUST set VIRTIO_CRYPTO_MAC_DESTROY_SESSION > > > +for \field{opcode} field in struct virtio_crypto_op_ctrl_req, and set the > > \field{queue_id} shows dataq used. > > > +The driver MUST set the \field{session_id} which MUST be a valid value > > which assigned by the > > > +device when a session was created. > > > > Two MUST in a single statement is one too many. > > Something like > > The driver MUST set the \field{session_id} to a value assigned by the > > device at session creation. > > ? > > > Good! > > > > + > > > +\devicenormative{\subparagraph}{Session operation: destroy > > session}\label{sec:Device Types / Crypto Device / Device > > > +Operation / Control Virtqueue / Session operation / Session operation: > > destroy session / Device Requirements: Session operation: destroy session} > > > + > > > +\field{status} field is written by the device: either VIRTIO_CRYPTO_OP_OK > > for success, VIRTIO_CRYPTO_OP_ERR for failure or device error. > > > + > > > +\subsubsection{Data Virtqueue}\label{sec:Device Types / Crypto Device / > > Device Operation / Data Virtqueue} > > > + > > > +The driver uses the data virtqueue to transmit the requests of crypto > > operation to the device, > > > +and to finish the data plane operations (such as crypto operation). > > > + > > > +The packet of dataq: > > > + > > > +\begin{lstlisting} > > > +struct virtio_crypto_op_data_req { > > > + struct virtio_crypto_op_header header; > > > + > > > + union { > > > + struct virtio_crypto_sym_data_req sym_req; > > > + struct virtio_crypto_hash_data_req hash_req; > > > + struct virtio_crypto_mac_data_req mac_req; > > > + struct virtio_crypto_aead_data_req aead_req; > > > + } u; > > > +}; > > > +\end{lstlisting} > > > + > > > +The header is the general header, the union is algorithm-specific type, > > > +which are set by the driver. All properties in the union will be shown as > > follow. > > > + > > > +There is a unify idata structure for all symmetric algorithms, including > > CIPHER, HASH, MAC, AEAD. > > > +The structure is defined as: > > > + > > > +\begin{lstlisting} > > > +struct virtio_crypto_sym_input { > > > + /* Destination data guest address, it's useless for plain HASH and > > > MAC > > */ > > > + __virtio64 dst_data_addr; > > > + /* Digest result guest address, it's useless for plain cipher algos > > > */ > > > + __virtio64 digest_result_addr; > > > + > > > + __virtio32 status; > > > + __virtio32 padding; > > > +}; > > > +\end{lstlisting} > > > + > > > +\paragraph{HASH Service Operation}\label{sec:Device Types / Crypto Device > > / Device Operation / Data Virtqueue / HASH Service Operation} > > > + > > > +\begin{lstlisting} > > > +struct virtio_crypto_hash_input { > > > + struct virtio_crypto_sym_input input; > > > +}; > > > + > > > +struct virtio_crypto_hash_output { > > > + /* source data guest address */ > > > + __virtio64 src_data_addr; > > > + /* length of source data */ > > > + __virtio32 src_data_len; > > > + __virtio32 padding; > > > +}; > > > + > > > +struct virtio_crypto_hash_data_req { > > > + /* Device-readable part */ > > > + struct virtio_crypto_hash_output odata; > > > + /* Device-writable part */ > > > + struct virtio_crypto_hash_input idata; > > > +}; > > > +\end{lstlisting} > > > + > > > +Each data request uses virtio_crypto_hash_data_req structure to store > > informations, > > > +which are used to execute one HASH operation. The request only occupies > > one entry > > > +of the Vring descriptor table in virtio crypto device's dataq, which > > > improves > > > +the throughput of data transferring for HASH service, so that the virtio > > crypto > > > +device CAN get the better result of acceleration. > > > + > > > +The informations include the source data guest physical address stored by > > \field{src_data_addr}, > > > +length of source data stored by \field{src_data_len}, digest result guest > > physical address > > > +stored by \field{digest_result_addr} which is used to save the result of > > > HASH > > operation. > > > +The address and length CAN determine the specific content in the guest > > memory. > > > + > > > +Note: The guest memory MUST be guaranteed to be allocated and > > physically-contiguous > > > +pointed by \field{digest_result_addr} in struct virtio_crypto_hash_input > > > and > > > +\field{src_data_addr} in struct virtio_crypto_hash_output. > > > + > > > +\drivernormative{\subparagraph}{HASH Service Operation}\label{sec:Device > > Types / Crypto Device / Device > > > +Operation / Data Virtqueue / HASH Service Operation / Driver > > > Requirements: > > HASH Service Operation} > > > + > > > +The driver MUST set the \field{opcode}, \field{session_id} in struct > > virtio_crypto_op_header. > > > +The \field{opcode} is set to VIRTIO_CRYPTO_HASH, \field{session_id} MUST > > be a valid value > > > +which assigned by the device when a session was created. > > > > Why repeat this for each opcode/session_id? > > > Er.. It seems superfluous, drop it. :( > > > > +The driver SHOULD set the \field{queue_id} field to show dataq used in > > struct virtio_crypto_op_header. > > > > Do things still work if it doesn't? > > > No, it doesn't. Because the device will read this filed to decide which data > virtqueue > (connected cryptodev client) will be used latter. Shall we need to change > SHOULD to MUST? If it's required, make it MUST. > > > +The driver MUST fill out all fields in struct > > > virtio_crypto_hash_data_req, > > including \field{parameter}, > > > +\field{odata} and \field{idata} sub structures. > > > + > > > +\devicenormative{\subparagraph}{HASH Service Operation}\label{sec:Device > > Types / Crypto Device / Device > > > +Operation / Data Virtqueue / HASH Service Operation / Device > > Requirements: HASH Service Operation} > > > + > > > +The device MUST copy the result of hash operation recorded by > > \field{digest_result_addr} > > > +filed in struct virtio_crypto_hash_input. > > > +The device MUST set the \field{status} in strut virtio_crypto_hash_input: > > either VIRTIO_CRYPTO_OP_OK for success, > > > +VIRTIO_CRYPTO_OP_ERR for creation failed or device error, > > VIRTIO_CRYPTO_OP_NOTSUPP for not support. > > > + > > > +\paragraph{MAC Service Operation}\label{sec:Device Types / Crypto Device > > / Device Operation / Data Virtqueue / MAC Service Operation} > > > + > > > +\begin{lstlisting} > > > +struct virtio_crypto_mac_input { > > > + struct virtio_crypto_sym_input input; > > > +}; > > > + > > > +struct virtio_crypto_mac_output { > > > + struct virtio_crypto_hash_output hash_output; > > > +}; > > > + > > > +struct virtio_crypto_mac_data_req { > > > + /* Device-readable part */ > > > + struct virtio_crypto_mac_output odata; > > > + /* Device-writable part */ > > > + struct virtio_crypto_mac_input idata; > > > +}; > > > +\end{lstlisting} > > > + > > > +Each data request uses virtio_crypto_mac_data_req structure to store > > informations, > > > +which are used to execute one MAC operation. The request only occupies > > one entry > > > +of the Vring descriptor table in virtio crypto device's dataq, which > > > improves > > > +the throughput of data transferring for MAC service, so that the virtio > > crypto > > > +device CAN get the better result of acceleration. > > > + > > > +The informations include the source data guest physical address stored by > > \field{src_data_addr}, > > > +length of source data stored by \field{src_data_len}, digest result guest > > physical address > > > +stored by \field{digest_result_addr} which is used to save the result of > > > MAC > > operation. > > > +The address and length CAN determine the specific content in the guest > > memory. > > > > don't upper-case please > > > OK. > > > > + > > > +Note: The guest memory MUST be guaranteed > > > > Pls put statemenets with RFC keywords, including MUST > > in a conformance statement section. > > Or reword to avoid this: > > > > The guest memory is always guaranteed to be allocated and > > physically-contiguous > > > OK, thanks. > > > > > >to be allocated and physically-contiguous > > > +pointed by \field{digest_result_addr} in struct virtio_crypto_hash_input > > > and > > > +\field{src_data_addr} in struct virtio_crypto_hash_output. > > > + > > > +\drivernormative{\subparagraph}{MAC Service Operation}\label{sec:Device > > Types / Crypto Device / Device > > > +Operation / Data Virtqueue / MAC Service Operation / Driver Requirements: > > MAC Service Operation} > > > + > > > +Refer to the hash operation. > > > > what does this mean? That same rules apply to all operations? Better just > > combine them in > > one section then, and list the minor differences. > > > OK, I'll combine them in the following version. > > Regards, > -Gonglei