On Thu, 08 Jun 2017 15:00:53 -0500 Michael Roth <mdr...@linux.vnet.ibm.com> wrote:
> Quoting David Gibson (2017-05-30 23:35:57) > > On Tue, May 30, 2017 at 06:04:45PM +0200, Laurent Vivier wrote: > > > For QEMU, a hotlugged device is a device added using the HMP/QMP > > > interface. > > > For SPAPR, a hotplugged device is a device added while the > > > machine is running. In this case QEMU doesn't update internal > > > state but relies on the OS for this part > > > > > > In the case of migration, when we (libvirt) hotplug a device > > > on the source guest, we (libvirt) generally hotplug the same > > > device on the destination guest. But in this case, the machine > > > is stopped (RUN_STATE_INMIGRATE) and QEMU must not expect > > > the OS will manage it as an hotplugged device as it will > > > be "imported" by the migration. > > > > > > This patch changes the meaning of "hotplugged" in spapr.c > > > to manage a QEMU hotplugged device like a "coldplugged" one > > > when the machine is awaiting an incoming migration. > > > > > > Signed-off-by: Laurent Vivier <lviv...@redhat.com> > > > > So, I think this is a reasonable concept, at least in terms of > > cleanliness and not doing unnecessary work. However, if it's fixing > > bugs, I suspect that means we still have problems elsewhere. > > I was hoping a lot of these issues would go away once we default > the initial/reset DRC states to "coldplugged". I think your pending > patch: > > "spapr: Make DRC reset force DRC into known state" > > But I didn't consider the fact that libvirt will be issuing these > hotplugs *after* reset, so those states would indeed need to > be fixed up again to reflect boot-time,attached as opposed to > boot-time,unattached before starting the target. > > So I do think this patch addresses a specific bug that isn't > obviously fixable elsewhere. > > To me it seems like the only way to avoid doing something like > what this patch does is to migrate all attached DRCs from the > source in all cases. > > This would break backward-migration though, unless we switch from > using subregions for DRCs to explicitly disabling DRC migration > based on machine type. we could leave old machines broken and fix only new machine types, then it would be easy ot migrate 'additional' DRC state as subsection only on new for new machines. > > That approach seems to similar to what x86 does, e.g. > hw/acpi/ich9.c and hw/acpi/piix.c migrate vmstate_memhp_state > (corresponding to all DIMMs' slot status) in all cases where > memory hotplug is enabled. If they were to do this using > subregions for DIMMs in a transitional state I think similar > issues would pop up in that code as well. > > Even if we take this route, we still need to explicitly suppress > hotplug events during INMIGRATE to avoid extra events going on > the queue. *Unless* we similarly rely purely on the ones sent by > the source. pc/q35 might also lose events if device is hotplugged during migration, in addition migration would fail anyway since dst qemu should be launched with all devices that are present on src. ex: consider if one hotplugs DIMM during migration, it creates RAM region mapped into guest and that region might be transferred as part of VMState (not sure if it even works) and considering dst qemu has no idea about hotplugged memory mapping, the migration would fail on receiving unknown VMState. Hotplug generally doesn't work during migration, so it should be disabled in a generic way on migration start and re-enabled on target on migration completion. How about blocking device_add when INMIGRATE state and unblocking it when switching to runnig on dst? > I believe the proposed event migration patches using > VMSTATE_QTAILQ_V only add to the list, so we'd need a variant > that either nukes the list first, or a pre-load hook in > vmstate_spapr_pending_events that does the same. > > Personally, it's seeming like the general approach of not > special-casing INMIGRATE, and just letting migration do the > fixing, is easier to deal with conceptually, albeit somewhat > less flexible in terms of backward compatibility. Both approaches > seem reasonable though. > > > > > Specifically, what is it we're doing before the incoming migration > > that's breaking things. Even if it's unnecessary, anything done there > > should be overwritten by the incoming stream. That should certainly > > be the case (now) for the DRC state variables. Maybe not for the > > queued hotplug events - but that means we should update the queue > > migration to make sure we clear anything existing on the destination > > before adding migrated events. > > > > I'm also concerned by the fact that this makes changes for memory and > > cpu hotplug, but not for PCI devices. Why aren't they also affected > > by this problem? > > > > One nit in the implementation, see below: > > > > > --- > > > hw/ppc/spapr.c | 20 ++++++++++++++------ > > > 1 file changed, 14 insertions(+), 6 deletions(-) > > > > > > diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c > > > index 0980d73..f1302d0 100644 > > > --- a/hw/ppc/spapr.c > > > +++ b/hw/ppc/spapr.c > > > @@ -2511,6 +2511,12 @@ static void spapr_nmi(NMIState *n, int cpu_index, > > > Error **errp) > > > } > > > } > > > > > > +static bool spapr_coldplugged(DeviceState *dev) > > > +{ > > > + return runstate_check(RUN_STATE_INMIGRATE) || > > > + !dev->hotplugged; > > > +} > > > + > > > static void spapr_add_lmbs(DeviceState *dev, uint64_t addr_start, > > > uint64_t size, > > > uint32_t node, bool dedicated_hp_event_source, > > > Error **errp) > > > @@ -2521,6 +2527,7 @@ static void spapr_add_lmbs(DeviceState *dev, > > > uint64_t addr_start, uint64_t size, > > > int i, fdt_offset, fdt_size; > > > void *fdt; > > > uint64_t addr = addr_start; > > > + bool coldplugged = spapr_coldplugged(dev); > > > > > > for (i = 0; i < nr_lmbs; i++) { > > > drc = spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_LMB, > > > @@ -2532,9 +2539,9 @@ static void spapr_add_lmbs(DeviceState *dev, > > > uint64_t addr_start, uint64_t size, > > > SPAPR_MEMORY_BLOCK_SIZE); > > > > > > drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc); > > > - drck->attach(drc, dev, fdt, fdt_offset, !dev->hotplugged, errp); > > > + drck->attach(drc, dev, fdt, fdt_offset, coldplugged, errp); > > > addr += SPAPR_MEMORY_BLOCK_SIZE; > > > - if (!dev->hotplugged) { > > > + if (coldplugged) { > > > /* guests expect coldplugged LMBs to be pre-allocated */ > > > drck->set_allocation_state(drc, > > > SPAPR_DR_ALLOCATION_STATE_USABLE); > > > drck->set_isolation_state(drc, > > > SPAPR_DR_ISOLATION_STATE_UNISOLATED); > > > @@ -2543,7 +2550,7 @@ static void spapr_add_lmbs(DeviceState *dev, > > > uint64_t addr_start, uint64_t size, > > > /* send hotplug notification to the > > > * guest only in case of hotplugged memory > > > */ > > > - if (dev->hotplugged) { > > > + if (!coldplugged) { > > > if (dedicated_hp_event_source) { > > > drc = spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_LMB, > > > addr_start / SPAPR_MEMORY_BLOCK_SIZE); > > > @@ -2776,6 +2783,7 @@ static void spapr_core_plug(HotplugHandler > > > *hotplug_dev, DeviceState *dev, > > > int smt = kvmppc_smt_threads(); > > > CPUArchId *core_slot; > > > int index; > > > + bool coldplugged = spapr_coldplugged(dev); > > > > > > core_slot = spapr_find_cpu_slot(MACHINE(hotplug_dev), cc->core_id, > > > &index); > > > if (!core_slot) { > > > @@ -2797,7 +2805,7 @@ static void spapr_core_plug(HotplugHandler > > > *hotplug_dev, DeviceState *dev, > > > > > > if (drc) { > > > sPAPRDRConnectorClass *drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc); > > > - drck->attach(drc, dev, fdt, fdt_offset, !dev->hotplugged, > > > &local_err); > > > + drck->attach(drc, dev, fdt, fdt_offset, coldplugged, &local_err); > > > if (local_err) { > > > g_free(fdt); > > > error_propagate(errp, local_err); > > > @@ -2805,7 +2813,7 @@ static void spapr_core_plug(HotplugHandler > > > *hotplug_dev, DeviceState *dev, > > > } > > > } > > > > > > - if (dev->hotplugged) { > > > + if (!coldplugged) { > > > /* > > > * Send hotplug notification interrupt to the guest only in case > > > * of hotplugged CPUs. > > > @@ -2838,7 +2846,7 @@ static void spapr_core_pre_plug(HotplugHandler > > > *hotplug_dev, DeviceState *dev, > > > int node_id; > > > int index; > > > > > > - if (dev->hotplugged && !mc->has_hotpluggable_cpus) { > > > + if (!spapr_coldplugged(dev) && !mc->has_hotpluggable_cpus) { > > > > It probably doesn't matter in practice, but in this specific instance, > > I think you want the "raw" qemu meaning of hotplugged rather than the > > spapr meaning. > > > > > error_setg(&local_err, "CPU hotplug not supported for this > > > machine"); > > > goto out; > > > } > > > > -- > > David Gibson | I'll have my music baroque, and my code > > david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_ > > | _way_ _around_! > > http://www.ozlabs.org/~dgibson > >