Hi Peter, It seems you forgot to add some files to MAINTAINERS.
That said, is there some old school perl guy motivated to add a such chek in checkpatch? On Tue, Jul 11, 2017 at 8:17 AM, Peter Maydell <peter.mayd...@linaro.org> wrote: > This patchseries adds support for the ARM MPS2/MPS2+ dev board: > > The MPS2 and MPS2+ dev boards are FPGA based (the 2+ has a bigger > FPGA but is otherwise the same as the 2). Since the CPU itself > and most of the devices are in the FPGA, the details of the board > as seen by the guest depend significantly on the FPGA image. > > We model the following FPGA images: > "mps2_an385" -- Cortex-M3 as documented in ARM Application Note AN385 > "mps2_an511" -- Cortex-M3 'DesignStart' as documented in AN511 > > They are fairly similar but differ in the details for some > peripherals. > Further info and links to all the documentation for the > board and the various FPGA images can be found here: > > https://developer.arm.com/products/system-design/development-boards/cortex-m-prototyping-system > > This patchset adds the boards themselves, and the UART, timer > and system-controller devices they need. There are a number > of other devices on the board which are not yet modelled > (notably more GPIOs, a watchdog, another different kind of timer, > and a display device), but this minimal set is sufficient to > boot the "hello world" binary of the Zephyr RTOS and the > "blinky" binary of the mbed RTOS. > [To run the zephyr binary you also need this fix: > http://patchwork.ozlabs.org/patch/782811/ > which is in the target-arm pullreq I just sent so should > get into master in a few days.] > > We can add more devices to the model later, but I figured > this was a sufficient place to start. > > The underlying motivation here is that the v8M work that I > have planned will need a board, and there is a v8M FPGA > image for the MPS2 that we can use. It's also perhaps a more > useful M profile board for general purposes than the stellaris > boards (64K RAM) or the Netduino2 (128K RAM), since it has > 16MB of RAM. > > thanks > -- PMM > > Peter Maydell (7): > hw/arm/mps2: Implement skeleton mps2-an385 and mps2-an511 board models > hw/char/cmsdk-apb-uart.c: Implement CMSDK APB UART > hw/arm/mps2: Add UARTs > hw/char/cmsdk-apb-timer: Implement CMSDK APB timer device > hw/arm/mps2: Add timers > hw/misc/mps2_scc: Implement MPS2 Serial Communication Controller > hw/arm/mps2: Add SCC > > hw/arm/Makefile.objs | 1 + > hw/char/Makefile.objs | 1 + > hw/misc/Makefile.objs | 1 + > hw/timer/Makefile.objs | 1 + > include/hw/char/cmsdk-apb-uart.h | 78 ++++++++ > include/hw/misc/mps2-scc.h | 43 ++++ > include/hw/timer/cmsdk-apb-timer.h | 59 ++++++ > hw/arm/mps2.c | 378 +++++++++++++++++++++++++++++++++++ > hw/char/cmsdk-apb-uart.c | 390 > +++++++++++++++++++++++++++++++++++++ > hw/misc/mps2-scc.c | 310 +++++++++++++++++++++++++++++ > hw/timer/cmsdk-apb-timer.c | 253 ++++++++++++++++++++++++ > default-configs/arm-softmmu.mak | 6 + > hw/char/trace-events | 9 + > hw/misc/trace-events | 8 + > hw/timer/trace-events | 5 + > 15 files changed, 1543 insertions(+) > create mode 100644 include/hw/char/cmsdk-apb-uart.h > create mode 100644 include/hw/misc/mps2-scc.h > create mode 100644 include/hw/timer/cmsdk-apb-timer.h > create mode 100644 hw/arm/mps2.c > create mode 100644 hw/char/cmsdk-apb-uart.c > create mode 100644 hw/misc/mps2-scc.c > create mode 100644 hw/timer/cmsdk-apb-timer.c > > -- > 2.7.4 > >