On Tue, Aug 22, 2017 at 02:43:39PM +0300, Marcel Apfelbaum wrote: > On 18/08/2017 2:36, Aleksandr Bezzubikov wrote: > > This series introduces a new device - Generic PCI Express to PCI bridge, > > and also makes all necessary changes to enable hotplug of the bridge itself > > and any device into the bridge. > > > > Hi, > > Series > Tested-by: Marcel Apfelbaum <mar...@redhat.com> > (focused on changes from v6) > > > Michael, will Alecsandr need to re-send it after freeze?
re-send or ping pls. > I am asking because the GSOC project is ending in a week or so. > > > Thanks, > Marcel > > > Changes v6->v7: > > Change IO/MEM/PREF reservation properties type to SIZE. > > > > Changes v5->v6: > > 1. Fix indentation in the cap creation function (addresses Marcel's comment) > > 2. Simplify capability pref_mem_* fields assignment (addresses Marcel's > > comment) > > 3. Documentation fixes: > > - fix mutually exclusive fields definition (addresses Laszlo's comment) > > - fix pcie-pci-bridge usage example (addresses Marcel's comment) > > > > Changes v4->v5: > > 1. Change PCIE-PCI Bridge license (addresses Marcel's comment) > > 2. The capability layout changes (adress Laszlo' comments): > > - separate pref_mem into pref_mem_32 and pref_mem_64 fields (SeaBIOS > > side has the same changes) > > - accordingly change the Generic Root Port's properties > > 3. Do not add the capability to the root port if no valid values are > > provided (adresses Michael's comment) > > 4. Rename the capability type to 'RESOURCE_RESERVE' (addresses Marcel's > > comment) > > 5. Remove shpc_present check function (addresses Marcel's comment) > > 6. Fix the 4th patch message (adresses Michael's comment) > > 7. Patch for SHPC enabling in _OSC method has been already merged > > > > Changes v3->v4: > > 1. PCIE-PCI Bridge device: "msi_enable"->"msi", "shpc"->"shpc_bar", remove > > local_err, > > make "msi" property OnOffAuto, shpc_present() is still here > > to avoid SHPC_VMSTATE refactoring (address Marcel's comments). > > 2. Change QEMU PCI capability layout (SeaBIOS side has the same changes): > > - change reservation fields types: bus_res - uint32_t, others - uint64_t > > - rename 'non_pref' and 'pref' fields > > - interpret -1 value as 'ignore' > > 3. Use parent_realize in Generic PCI Express Root Port properly. > > 4. Fix documentation: fully replace the DMI-PCI bridge references with the > > new PCIE-PCI bridge, > > "PCIE"->"PCI Express", small mistakes and typos - address Laszlo's and > > Marcel's comments. > > 5. Rename QEMU PCI cap creation fucntion - addresses Marcel's comment. > > > > Changes v2->v3: > > (0). 'do_not_use' capability field flag is still _not_ in here since we > > haven't come to consesus on it yet. > > 1. Merge commits 5 (bus_reserve property creation) and 6 (property usage) > > together - addresses Michael's comment. > > 2. Add 'bus_reserve' property and QEMU PCI capability only to Generic PCIE > > Root Port - addresses Michael's and Marcel's comments. > > 3. Change 'bus_reserve' property's default value to 0 - addresses Michael's > > comment. > > 4. Rename QEMU bridge-specific PCI capability creation function - addresses > > Michael's comment. > > 5. Init the whole QEMU PCI capability with zeroes - addresses Michael's and > > Laszlo's comments. > > 6. Change QEMU PCI capability layout (SeaBIOS side has the same changes) > > - add 'type' field to distinguish multiple > > RedHat-specific capabilities - addresses Michael's comment > > - do not mimiŃ PCI Config space register layout, but use mutually > > exclusive differently > > sized fields for IO and prefetchable memory limits - addresses > > Laszlo's comment > > 7. Correct error handling in PCIE-PCI bridge realize function. > > 8. Replace a '2' constant with PCI_CAP_FLAGS in the capability creation > > function - addresses Michael's comment. > > 9. Remove a comment on _OSC which isn't correct anymore - address Marcel's > > comment. > > 10. Add documentation for the Generic PCIE-PCI Bridge and QEMU PCI > > capability - addresses Michael's comment. > > > > Changes v1->v2: > > 1. Enable SHPC for the bridge. > > 2. Enable SHPC support for the Q35 machine (ACPI stuff). > > 3. Introduce PCI capability to help firmware on the system init. > > This allows the bridge to be hotpluggable. Now it's supported > > only for pcie-root-port. Now it's supposed to used with > > SeaBIOS only, look at the SeaBIOS corresponding series > > "Allow RedHat PCI bridges reserve more buses than necessary during > > init". > > > > Aleksandr Bezzubikov (4): > > hw/pci: introduce pcie-pci-bridge device > > hw/pci: introduce bridge-only vendor-specific capability to provide > > some hints to firmware > > hw/pci: add QEMU-specific PCI capability to the Generic PCI Express > > Root Port > > docs: update documentation considering PCIE-PCI bridge > > > > docs/pcie.txt | 49 +++++----- > > docs/pcie_pci_bridge.txt | 114 ++++++++++++++++++++++ > > hw/pci-bridge/Makefile.objs | 2 +- > > hw/pci-bridge/gen_pcie_root_port.c | 36 +++++++ > > hw/pci-bridge/pcie_pci_bridge.c | 192 > > +++++++++++++++++++++++++++++++++++++ > > hw/pci/pci_bridge.c | 46 +++++++++ > > include/hw/pci/pci.h | 1 + > > include/hw/pci/pci_bridge.h | 25 +++++ > > include/hw/pci/pcie_port.h | 1 + > > 9 files changed, 442 insertions(+), 24 deletions(-) > > create mode 100644 docs/pcie_pci_bridge.txt > > create mode 100644 hw/pci-bridge/pcie_pci_bridge.c > >