Name the registers for tracing purposes.
Signed-off-by: John Snow <js...@redhat.com>
Reviewed-by: Eric Blake <ebl...@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefa...@redhat.com>
Message-id: 20170901001502.29915-3-js...@redhat.com
Signed-off-by: John Snow <js...@redhat.com>
---
hw/ide/core.c | 88 +++++++++++++++++++++++++++++++++++++++++------------
hw/ide/trace-events | 8 ++---
2 files changed, 72 insertions(+), 24 deletions(-)
diff --git a/hw/ide/core.c b/hw/ide/core.c
index 31fd593..cb250e6 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -1185,13 +1185,37 @@ static void ide_clear_hob(IDEBus *bus)
bus->ifs[1].select &= ~(1 << 7);
}
+/* IOport [W]rite [R]egisters */
+enum ATA_IOPORT_WR {
+ ATA_IOPORT_WR_DATA = 0,
+ ATA_IOPORT_WR_FEATURES = 1,
+ ATA_IOPORT_WR_SECTOR_COUNT = 2,
+ ATA_IOPORT_WR_SECTOR_NUMBER = 3,
+ ATA_IOPORT_WR_CYLINDER_LOW = 4,
+ ATA_IOPORT_WR_CYLINDER_HIGH = 5,
+ ATA_IOPORT_WR_DEVICE_HEAD = 6,
+ ATA_IOPORT_WR_COMMAND = 7,
+ ATA_IOPORT_WR_NUM_REGISTERS,
+};
+
+const char *ATA_IOPORT_WR_lookup[ATA_IOPORT_WR_NUM_REGISTERS] = {
+ [ATA_IOPORT_WR_DATA] = "Data",
+ [ATA_IOPORT_WR_FEATURES] = "Features",
+ [ATA_IOPORT_WR_SECTOR_COUNT] = "Sector Count",
+ [ATA_IOPORT_WR_SECTOR_NUMBER] = "Sector Number",
+ [ATA_IOPORT_WR_CYLINDER_LOW] = "Cylinder Low",
+ [ATA_IOPORT_WR_CYLINDER_HIGH] = "Cylinder High",
+ [ATA_IOPORT_WR_DEVICE_HEAD] = "Device/Head",
+ [ATA_IOPORT_WR_COMMAND] = "Command"
+};
+
void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val)
{
IDEBus *bus = opaque;
IDEState *s = idebus_active_if(bus);
int reg_num = addr & 7;
- trace_ide_ioport_write(addr, val, bus, s);
+ trace_ide_ioport_write(addr, ATA_IOPORT_WR_lookup[reg_num], val, bus, s);
/* ignore writes to command block while busy with previous command */
if (reg_num != 7 && (s->status & (BUSY_STAT|DRQ_STAT))) {
@@ -1201,43 +1225,43 @@ void ide_ioport_write(void *opaque, uint32_t addr,
uint32_t val)
switch (reg_num) {
case 0:
break;
- case 1:
- ide_clear_hob(bus);
+ case ATA_IOPORT_WR_FEATURES:
+ ide_clear_hob(bus);
/* NOTE: data is written to the two drives */
- bus->ifs[0].hob_feature = bus->ifs[0].feature;
- bus->ifs[1].hob_feature = bus->ifs[1].feature;
+ bus->ifs[0].hob_feature = bus->ifs[0].feature;
+ bus->ifs[1].hob_feature = bus->ifs[1].feature;
bus->ifs[0].feature = val;
bus->ifs[1].feature = val;
break;
- case 2:
+ case ATA_IOPORT_WR_SECTOR_COUNT:
ide_clear_hob(bus);
bus->ifs[0].hob_nsector = bus->ifs[0].nsector;
bus->ifs[1].hob_nsector = bus->ifs[1].nsector;
bus->ifs[0].nsector = val;
bus->ifs[1].nsector = val;
break;
- case 3:
+ case ATA_IOPORT_WR_SECTOR_NUMBER:
ide_clear_hob(bus);
bus->ifs[0].hob_sector = bus->ifs[0].sector;
bus->ifs[1].hob_sector = bus->ifs[1].sector;
bus->ifs[0].sector = val;
bus->ifs[1].sector = val;
break;
- case 4:
+ case ATA_IOPORT_WR_CYLINDER_LOW:
ide_clear_hob(bus);
bus->ifs[0].hob_lcyl = bus->ifs[0].lcyl;
bus->ifs[1].hob_lcyl = bus->ifs[1].lcyl;
bus->ifs[0].lcyl = val;
bus->ifs[1].lcyl = val;
break;
- case 5:
+ case ATA_IOPORT_WR_CYLINDER_HIGH:
ide_clear_hob(bus);
bus->ifs[0].hob_hcyl = bus->ifs[0].hcyl;
bus->ifs[1].hob_hcyl = bus->ifs[1].hcyl;
bus->ifs[0].hcyl = val;
bus->ifs[1].hcyl = val;
break;
- case 6:
+ case ATA_IOPORT_WR_DEVICE_HEAD:
/* FIXME: HOB readback uses bit 7 */
bus->ifs[0].select = (val & ~0x10) | 0xa0;
bus->ifs[1].select = (val | 0x10) | 0xa0;
@@ -1245,7 +1269,7 @@ void ide_ioport_write(void *opaque, uint32_t addr,
uint32_t val)
bus->unit = (val >> 4) & 1;
break;
default:
- case 7:
+ case ATA_IOPORT_WR_COMMAND:
/* command */
ide_exec_cmd(bus, val);
break;
@@ -2052,6 +2076,30 @@ void ide_exec_cmd(IDEBus *bus, uint32_t val)
}
}
+/* IOport [R]ead [R]egisters */
+enum ATA_IOPORT_RR {
+ ATA_IOPORT_RR_DATA = 0,
+ ATA_IOPORT_RR_ERROR = 1,
+ ATA_IOPORT_RR_SECTOR_COUNT = 2,
+ ATA_IOPORT_RR_SECTOR_NUMBER = 3,
+ ATA_IOPORT_RR_CYLINDER_LOW = 4,
+ ATA_IOPORT_RR_CYLINDER_HIGH = 5,
+ ATA_IOPORT_RR_DEVICE_HEAD = 6,
+ ATA_IOPORT_RR_STATUS = 7,
+ ATA_IOPORT_RR_NUM_REGISTERS,
+};
+
+const char *ATA_IOPORT_RR_lookup[ATA_IOPORT_RR_NUM_REGISTERS] = {
+ [ATA_IOPORT_RR_DATA] = "Data",
+ [ATA_IOPORT_RR_ERROR] = "Error",
+ [ATA_IOPORT_RR_SECTOR_COUNT] = "Sector Count",
+ [ATA_IOPORT_RR_SECTOR_NUMBER] = "Sector Number",
+ [ATA_IOPORT_RR_CYLINDER_LOW] = "Cylinder Low",
+ [ATA_IOPORT_RR_CYLINDER_HIGH] = "Cylinder High",
+ [ATA_IOPORT_RR_DEVICE_HEAD] = "Device/Head",
+ [ATA_IOPORT_RR_STATUS] = "Status"
+};
+
uint32_t ide_ioport_read(void *opaque, uint32_t addr)
{
IDEBus *bus = opaque;
@@ -2064,10 +2112,10 @@ uint32_t ide_ioport_read(void *opaque, uint32_t addr)
//hob = s->select & (1 << 7);
hob = 0;
switch (reg_num) {
- case 0:
+ case ATA_IOPORT_RR_DATA:
ret = 0xff;
break;
- case 1:
+ case ATA_IOPORT_RR_ERROR:
if ((!bus->ifs[0].blk && !bus->ifs[1].blk) ||
(s != bus->ifs && !s->blk)) {
ret = 0;
@@ -2077,7 +2125,7 @@ uint32_t ide_ioport_read(void *opaque, uint32_t addr)
ret = s->hob_feature;
}
break;
- case 2:
+ case ATA_IOPORT_RR_SECTOR_COUNT:
if (!bus->ifs[0].blk && !bus->ifs[1].blk) {
ret = 0;
} else if (!hob) {
@@ -2086,7 +2134,7 @@ uint32_t ide_ioport_read(void *opaque, uint32_t addr)
ret = s->hob_nsector;
}
break;
- case 3:
+ case ATA_IOPORT_RR_SECTOR_NUMBER:
if (!bus->ifs[0].blk && !bus->ifs[1].blk) {
ret = 0;
} else if (!hob) {
@@ -2095,7 +2143,7 @@ uint32_t ide_ioport_read(void *opaque, uint32_t addr)
ret = s->hob_sector;
}
break;
- case 4:
+ case ATA_IOPORT_RR_CYLINDER_LOW:
if (!bus->ifs[0].blk && !bus->ifs[1].blk) {
ret = 0;
} else if (!hob) {
@@ -2104,7 +2152,7 @@ uint32_t ide_ioport_read(void *opaque, uint32_t addr)
ret = s->hob_lcyl;
}
break;
- case 5:
+ case ATA_IOPORT_RR_CYLINDER_HIGH:
if (!bus->ifs[0].blk && !bus->ifs[1].blk) {
ret = 0;
} else if (!hob) {
@@ -2113,7 +2161,7 @@ uint32_t ide_ioport_read(void *opaque, uint32_t addr)
ret = s->hob_hcyl;
}
break;
- case 6:
+ case ATA_IOPORT_RR_DEVICE_HEAD:
if (!bus->ifs[0].blk && !bus->ifs[1].blk) {
ret = 0;
} else {
@@ -2121,7 +2169,7 @@ uint32_t ide_ioport_read(void *opaque, uint32_t addr)
}
break;
default:
- case 7:
+ case ATA_IOPORT_RR_STATUS:
if ((!bus->ifs[0].blk && !bus->ifs[1].blk) ||
(s != bus->ifs && !s->blk)) {
ret = 0;
@@ -2132,7 +2180,7 @@ uint32_t ide_ioport_read(void *opaque, uint32_t addr)
break;
}
- trace_ide_ioport_read(addr, ret, bus, s);
+ trace_ide_ioport_read(addr, ATA_IOPORT_RR_lookup[reg_num], ret, bus, s);
return ret;
}
diff --git a/hw/ide/trace-events b/hw/ide/trace-events
index b9792812..bff8f39 100644
--- a/hw/ide/trace-events
+++ b/hw/ide/trace-events
@@ -2,10 +2,10 @@
# hw/ide/core.c
# portio
-ide_ioport_read(uint32_t addr, uint32_t val, void *bus, void *s) "IDE PIO rd
@ 0x%"PRIx32"; val 0x%02"PRIx32"; bus %p IDEState %p"
-ide_ioport_write(uint32_t addr, uint32_t val, void *bus, void *s) "IDE PIO wr
@ 0x%"PRIx32"; val 0x%02"PRIx32"; bus %p IDEState %p"
-ide_status_read(uint32_t addr, uint32_t val, void *bus, void *s) "IDE PIO rd
@ 0x%"PRIx32" (Alt Status); val 0x%02"PRIx32"; bus %p; IDEState %p"
-ide_cmd_write(uint32_t addr, uint32_t val, void *bus) "IDE PIO wr
@ 0x%"PRIx32" (Device Control); val 0x%02"PRIx32"; bus %p"
+ide_ioport_read(uint32_t addr, const char *reg, uint32_t val, void *bus, void
*s) "IDE PIO rd @ 0x%"PRIx32" (%s); val 0x%02"PRIx32"; bus %p IDEState %p"
+ide_ioport_write(uint32_t addr, const char *reg, uint32_t val, void *bus, void
*s) "IDE PIO wr @ 0x%"PRIx32" (%s); val 0x%02"PRIx32"; bus %p IDEState %p"
+ide_status_read(uint32_t addr, uint32_t val, void *bus, void *s)
"IDE PIO rd @ 0x%"PRIx32" (Alt Status); val 0x%02"PRIx32"; bus %p; IDEState
%p"
+ide_cmd_write(uint32_t addr, uint32_t val, void *bus)
"IDE PIO wr @ 0x%"PRIx32" (Device Control); val 0x%02"PRIx32"; bus %p"
# misc
ide_exec_cmd(void *bus, void *state, uint32_t cmd) "IDE exec cmd: bus %p;
state %p; cmd 0x%02x"
ide_cancel_dma_sync_buffered(void *fn, void *req) "invoking cb %p of buffered
request %p with -ECANCELED"
--
2.9.5
