The e1000 has compatibility code to handle big endianness which makes it
mandatory to be recompiled on different targets.
With the generic mmio endianness solution, there's no need for that anymore.
We just declare all mmio to be little endian and call it a day.
Because we don't depend on the target endianness anymore, we can also
move the driver over to Makefile.objs.
Signed-off-by: Alexander Graf <ag...@suse.de>
---
Makefile.objs | 1 +
Makefile.target | 1 -
hw/e1000.c | 11 ++---------
3 files changed, 3 insertions(+), 10 deletions(-)
diff --git a/Makefile.objs b/Makefile.objs
index 04625eb..29b1ede 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -224,6 +224,7 @@ hw-obj-$(CONFIG_NE2000_PCI) += ne2000.o
hw-obj-$(CONFIG_EEPRO100_PCI) += eepro100.o
hw-obj-$(CONFIG_PCNET_PCI) += pcnet-pci.o
hw-obj-$(CONFIG_PCNET_COMMON) += pcnet.o
+hw-obj-$(CONFIG_E1000_PCI) += e1000.o
hw-obj-$(CONFIG_SMC91C111) += smc91c111.o
hw-obj-$(CONFIG_LAN9118) += lan9118.o
diff --git a/Makefile.target b/Makefile.target
index 5784844..39d8df9 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -211,7 +211,6 @@ obj-$(CONFIG_USB_OHCI) += usb-ohci.o
# PCI network cards
obj-$(CONFIG_RTL8139_PCI) += rtl8139.o
-obj-$(CONFIG_E1000_PCI) += e1000.o
# Inter-VM PCI shared memory
obj-$(CONFIG_KVM) += ivshmem.o
diff --git a/hw/e1000.c b/hw/e1000.c
index bf3f2d3..a697abd 100644
--- a/hw/e1000.c
+++ b/hw/e1000.c
@@ -857,9 +857,6 @@ e1000_mmio_writel(void *opaque, target_phys_addr_t addr,
uint32_t val)
E1000State *s = opaque;
unsigned int index = (addr & 0x1ffff) >> 2;
-#ifdef TARGET_WORDS_BIGENDIAN
- val = bswap32(val);
-#endif
if (index < NWRITEOPS && macreg_writeops[index]) {
macreg_writeops[index](s, index, val);
} else if (index < NREADOPS && macreg_readops[index]) {
@@ -894,11 +891,7 @@ e1000_mmio_readl(void *opaque, target_phys_addr_t addr)
if (index < NREADOPS && macreg_readops[index])
{
- uint32_t val = macreg_readops[index](s, index);
-#ifdef TARGET_WORDS_BIGENDIAN
- val = bswap32(val);
-#endif
- return val;
+ return macreg_readops[index](s, index);
}
DBGOUT(UNKNOWN, "MMIO unknown read addr=0x%08x\n", index<<2);
return 0;
@@ -1131,7 +1124,7 @@ static int pci_e1000_init(PCIDevice *pci_dev)
pci_conf[PCI_INTERRUPT_PIN] = 1; // interrupt pin 0
d->mmio_index = cpu_register_io_memory(e1000_mmio_read,
- e1000_mmio_write, d, DEVICE_NATIVE_ENDIAN);
+ e1000_mmio_write, d, DEVICE_LITTLE_ENDIAN);
pci_register_bar(&d->dev, 0, PNPMMIO_SIZE,
PCI_BASE_ADDRESS_SPACE_MEMORY, e1000_mmio_map);
--
1.6.0.2
