From: Corey Minyard <cminy...@mvista.com>
This lets an event be added to the SEL as if a sensor had generated
it. The OpenIPMI driver uses it for storing panic event information.
Signed-off-by: Corey Minyard <cminy...@mvista.com>
Reviewed-by: Cédric Le Goater <c...@kaod.org>
---
hw/ipmi/ipmi_bmc_sim.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/hw/ipmi/ipmi_bmc_sim.c b/hw/ipmi/ipmi_bmc_sim.c
index a0bbfd5..e84d710 100644
--- a/hw/ipmi/ipmi_bmc_sim.c
+++ b/hw/ipmi/ipmi_bmc_sim.c
@@ -38,6 +38,7 @@
#define IPMI_NETFN_SENSOR_EVENT 0x04
+#define IPMI_CMD_PLATFORM_EVENT_MSG 0x02
#define IPMI_CMD_SET_SENSOR_EVT_ENABLE 0x28
#define IPMI_CMD_GET_SENSOR_EVT_ENABLE 0x29
#define IPMI_CMD_REARM_SENSOR_EVTS 0x2a
@@ -1581,6 +1582,28 @@ static void set_sel_time(IPMIBmcSim *ibs,
ibs->sel.time_offset = now.tv_sec - ((long) val);
}
+static void platform_event_msg(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ RspBuffer *rsp)
+{
+ uint8_t event[16];
+
+ event[2] = 2; /* System event record */
+ event[7] = cmd[2]; /* Generator ID */
+ event[8] = 0;
+ event[9] = cmd[3]; /* EvMRev */
+ event[10] = cmd[4]; /* Sensor type */
+ event[11] = cmd[5]; /* Sensor number */
+ event[12] = cmd[6]; /* Event dir / Event type */
+ event[13] = cmd[7]; /* Event data 1 */
+ event[14] = cmd[8]; /* Event data 2 */
+ event[15] = cmd[9]; /* Event data 3 */
+
+ if (sel_add_event(ibs, event)) {
+ rsp_buffer_set_error(rsp, IPMI_CC_OUT_OF_SPACE);
+ }
+}
+
static void set_sensor_evt_enable(IPMIBmcSim *ibs,
uint8_t *cmd, unsigned int cmd_len,
RspBuffer *rsp)
@@ -1757,6 +1780,7 @@ static const IPMINetfn chassis_netfn = {
};
static const IPMICmdHandler sensor_event_cmds[] = {
+ [IPMI_CMD_PLATFORM_EVENT_MSG] = { platform_event_msg, 10 },
[IPMI_CMD_SET_SENSOR_EVT_ENABLE] = { set_sensor_evt_enable, 4 },
[IPMI_CMD_GET_SENSOR_EVT_ENABLE] = { get_sensor_evt_enable, 3 },
[IPMI_CMD_REARM_SENSOR_EVTS] = { rearm_sensor_evts, 4 },
--
2.7.4
