On 12/20/2017 06:09 AM, David Gibson wrote: > On Sat, Dec 09, 2017 at 09:43:21AM +0100, Cédric Le Goater wrote: >> With the POWER9 processor comes a new interrupt controller called >> XIVE. It is composed of three sub-engines : >> >> - Interrupt Virtualization Source Engine (IVSE). These are in PHBs, >> in the main controller for the IPIS and in the PSI host >> bridge. They are configured to feed the IVRE with events. >> >> - Interrupt Virtualization Routing Engine (IVRE). Their job is to >> match an event source with a Notification Virtualization Target >> (NVT), a priority and an Event Queue (EQ) to determine if a >> Virtual Processor can handle the event. >> >> - Interrupt Virtualization Presentation Engine (IVPE). It maintains >> the interrupt state of each hardware thread and present the >> notification as an external exception. >> >> Each of the engines uses a set of internal tables to redirect >> exceptions from event sources to CPU threads. The first table we >> introduce is the Interrupt Virtualization Entry (IVE) table, part of >> the virtualization engine in charge of routing events. It associates >> event sources (IRQ numbers) to event queues which will forward, or >> not, the event notification to the presentation controller. >> >> The XIVE model is designed to make use of the full range of the IRQ >> number space and does not use an offset like the XICS mode does. >> Hence, the IVE table is directly indexed by the IRQ number. >> >> Signed-off-by: Cédric Le Goater <c...@kaod.org> > > As you've suggested in yourself, I think we might need to more > explicitly model the different components of the XIVE system. As part > of that, I think you need to be clearer in this base skeleton about > exactly what component your XIVE object represents.
ok. The base skeleton is the IVRE, the central engine handling the routing. > If the answer is "the overall thing" Yes, it is more or less that currently. The sPAPRXive object models the source engine and the routing engine in one object. I have merged these for simplicity and because the interrupt controller has an internal source for the interrupts of the "IPI" type, which are used for the CPU IPIs but also for other generic interrupts, like the OpenCAPI ones. The XIVE sPAPR interface is also much simpler than the baremetal one, all the tables are maintained in the hypervisor, so this choice made some sense. But since, I have started the PowerNV model and I am duplicating a lot of code to handle the triggering and the MMIOs in the different sources. So I am not convinced anymore. Nevertheless, the overall routing logic is the same even if some the tables are not located in QEMU anymore, but in the machine memory. The sPAPRXiveNVT models some of the CPU presenter engine. It holds the virtual CPU interrupt states when not dispatched on a real HW thread. Real world is more complex. There are "CAM" lines in the HW threads which are compared to find a matching candidate. But I don't think we need to anything more complex than today unless we want to support KVM under TCG ... > I suspect that's not what you > want - I had one of those for XICs which proved to be a mistake > (eventually replaced by the XICSFabric interface). The XICSFabric would be the main Xive object. The interface between the sources and the routing engine is hidden in sPAPR, we can use a simple function call : spapr_xive_irq(pnv->xive, irq); we could get rid of the qirqs but they are required for XICS. PowerNV uses MMIOs to notify an event and it makes the modeling somewhat easier. Each controller model has a notify port address register on which a interrupt number is written to forward an event to the routing engine. So it is a simple store. I don't know why there is a different notify port address per source, may be for extra filtering at the routing engine level. > Changing the model later isn't impossible, but doing so without > breaking migration can be a real pain, so I think it's worth a > reasonable effort to try and get it right initially. I completely agree. This is why I have started the PnvXive model to challenge the current PAPR design. I have hacked a bunch of patches for XIVE, LPC, PSI, OCC and basic PPC support which boot a PowerNV P9 up to petitboot. It would look better with a source object, but the location of the PQ bits is a bit problematic. It highly depends on the controller. The main controller uses tables in the hypervisor memory. The PSIHB controller has its own bits. I suppose it is the same for PHB4. I need to take a closer look at how we could have a common source object. The most important part is KVM support and how we expose the MMIO region. We need to make progress on that topic. Thanks, C. >> --- >> >> Changes since v1 : >> >> - used g_new0 instead of g_malloc0 >> - removed VMSTATE_STRUCT_VARRAY_UINT32_ALLOC >> - introduced a device reset handler. the object needs to be parented >> to sysbus when created. >> - renamed spapr_xive_irq_set to spapr_xive_irq_enable >> - renamed spapr_xive_irq_unset to spapr_xive_irq_disable >> - moved the PPC_BIT macros under target/ppc/cpu.h >> - shrinked file copyright header >> >> default-configs/ppc64-softmmu.mak | 1 + >> hw/intc/Makefile.objs | 1 + >> hw/intc/spapr_xive.c | 156 >> ++++++++++++++++++++++++++++++++++++++ >> hw/intc/xive-internal.h | 41 ++++++++++ >> include/hw/ppc/spapr_xive.h | 35 +++++++++ >> 5 files changed, 234 insertions(+) >> create mode 100644 hw/intc/spapr_xive.c >> create mode 100644 hw/intc/xive-internal.h >> create mode 100644 include/hw/ppc/spapr_xive.h >> >> diff --git a/default-configs/ppc64-softmmu.mak >> b/default-configs/ppc64-softmmu.mak >> index d1b3a6dd50f8..4a7f6a0696de 100644 >> --- a/default-configs/ppc64-softmmu.mak >> +++ b/default-configs/ppc64-softmmu.mak >> @@ -56,6 +56,7 @@ CONFIG_SM501=y >> CONFIG_XICS=$(CONFIG_PSERIES) >> CONFIG_XICS_SPAPR=$(CONFIG_PSERIES) >> CONFIG_XICS_KVM=$(call land,$(CONFIG_PSERIES),$(CONFIG_KVM)) >> +CONFIG_XIVE_SPAPR=$(CONFIG_PSERIES) >> # For PReP >> CONFIG_SERIAL_ISA=y >> CONFIG_MC146818RTC=y >> diff --git a/hw/intc/Makefile.objs b/hw/intc/Makefile.objs >> index ae358569a155..49e13e7aeeee 100644 >> --- a/hw/intc/Makefile.objs >> +++ b/hw/intc/Makefile.objs >> @@ -35,6 +35,7 @@ obj-$(CONFIG_SH4) += sh_intc.o >> obj-$(CONFIG_XICS) += xics.o >> obj-$(CONFIG_XICS_SPAPR) += xics_spapr.o >> obj-$(CONFIG_XICS_KVM) += xics_kvm.o >> +obj-$(CONFIG_XIVE_SPAPR) += spapr_xive.o >> obj-$(CONFIG_POWERNV) += xics_pnv.o >> obj-$(CONFIG_ALLWINNER_A10_PIC) += allwinner-a10-pic.o >> obj-$(CONFIG_S390_FLIC) += s390_flic.o >> diff --git a/hw/intc/spapr_xive.c b/hw/intc/spapr_xive.c >> new file mode 100644 >> index 000000000000..e6e8841add17 >> --- /dev/null >> +++ b/hw/intc/spapr_xive.c >> @@ -0,0 +1,156 @@ >> +/* >> + * QEMU PowerPC sPAPR XIVE interrupt controller model >> + * >> + * Copyright (c) 2017, IBM Corporation. >> + * >> + * This code is licensed under the GPL version 2 or later. See the >> + * COPYING file in the top-level directory. >> + */ >> + >> +#include "qemu/osdep.h" >> +#include "qemu/log.h" >> +#include "qapi/error.h" >> +#include "target/ppc/cpu.h" >> +#include "sysemu/cpus.h" >> +#include "sysemu/dma.h" >> +#include "monitor/monitor.h" >> +#include "hw/ppc/spapr_xive.h" >> + >> +#include "xive-internal.h" >> + >> +/* >> + * Main XIVE object >> + */ >> + >> +void spapr_xive_pic_print_info(sPAPRXive *xive, Monitor *mon) >> +{ >> + int i; >> + >> + for (i = 0; i < xive->nr_irqs; i++) { >> + XiveIVE *ive = &xive->ivt[i]; >> + >> + if (!(ive->w & IVE_VALID)) { >> + continue; >> + } >> + >> + monitor_printf(mon, " %4x %s %08x %08x\n", i, >> + ive->w & IVE_MASKED ? "M" : " ", >> + (int) GETFIELD(IVE_EQ_INDEX, ive->w), >> + (int) GETFIELD(IVE_EQ_DATA, ive->w)); >> + } >> +} >> + >> +static void spapr_xive_reset(DeviceState *dev) >> +{ >> + sPAPRXive *xive = SPAPR_XIVE(dev); >> + int i; >> + >> + /* Mask all valid IVEs in the IRQ number space. */ >> + for (i = 0; i < xive->nr_irqs; i++) { >> + XiveIVE *ive = &xive->ivt[i]; >> + if (ive->w & IVE_VALID) { >> + ive->w |= IVE_MASKED; >> + } >> + } >> +} >> + >> +static void spapr_xive_realize(DeviceState *dev, Error **errp) >> +{ >> + sPAPRXive *xive = SPAPR_XIVE(dev); >> + >> + if (!xive->nr_irqs) { >> + error_setg(errp, "Number of interrupt needs to be greater 0"); >> + return; >> + } >> + >> + /* Allocate the IVT (Interrupt Virtualization Table) */ >> + xive->ivt = g_new0(XiveIVE, xive->nr_irqs); >> +} >> + >> +static const VMStateDescription vmstate_spapr_xive_ive = { >> + .name = TYPE_SPAPR_XIVE "/ive", >> + .version_id = 1, >> + .minimum_version_id = 1, >> + .fields = (VMStateField []) { >> + VMSTATE_UINT64(w, XiveIVE), >> + VMSTATE_END_OF_LIST() >> + }, >> +}; >> + >> +static bool vmstate_spapr_xive_needed(void *opaque) >> +{ >> + /* TODO check machine XIVE support */ >> + return true; >> +} >> + >> +static const VMStateDescription vmstate_spapr_xive = { >> + .name = TYPE_SPAPR_XIVE, >> + .version_id = 1, >> + .minimum_version_id = 1, >> + .needed = vmstate_spapr_xive_needed, >> + .fields = (VMStateField[]) { >> + VMSTATE_UINT32_EQUAL(nr_irqs, sPAPRXive, NULL), >> + VMSTATE_STRUCT_VARRAY_UINT32(ivt, sPAPRXive, nr_irqs, 1, >> + vmstate_spapr_xive_ive, XiveIVE), >> + VMSTATE_END_OF_LIST() >> + }, >> +}; >> + >> +static Property spapr_xive_properties[] = { >> + DEFINE_PROP_UINT32("nr-irqs", sPAPRXive, nr_irqs, 0), >> + DEFINE_PROP_END_OF_LIST(), >> +}; >> + >> +static void spapr_xive_class_init(ObjectClass *klass, void *data) >> +{ >> + DeviceClass *dc = DEVICE_CLASS(klass); >> + >> + dc->realize = spapr_xive_realize; >> + dc->reset = spapr_xive_reset; >> + dc->props = spapr_xive_properties; >> + dc->desc = "sPAPR XIVE interrupt controller"; >> + dc->vmsd = &vmstate_spapr_xive; >> +} >> + >> +static const TypeInfo spapr_xive_info = { >> + .name = TYPE_SPAPR_XIVE, >> + .parent = TYPE_SYS_BUS_DEVICE, >> + .instance_size = sizeof(sPAPRXive), >> + .class_init = spapr_xive_class_init, >> +}; >> + >> +static void spapr_xive_register_types(void) >> +{ >> + type_register_static(&spapr_xive_info); >> +} >> + >> +type_init(spapr_xive_register_types) >> + >> +XiveIVE *spapr_xive_get_ive(sPAPRXive *xive, uint32_t lisn) >> +{ >> + return lisn < xive->nr_irqs ? &xive->ivt[lisn] : NULL; >> +} >> + >> +bool spapr_xive_irq_enable(sPAPRXive *xive, uint32_t lisn) >> +{ >> + XiveIVE *ive = spapr_xive_get_ive(xive, lisn); >> + >> + if (!ive) { >> + return false; >> + } >> + >> + ive->w |= IVE_VALID; >> + return true; >> +} >> + >> +bool spapr_xive_irq_disable(sPAPRXive *xive, uint32_t lisn) >> +{ >> + XiveIVE *ive = spapr_xive_get_ive(xive, lisn); >> + >> + if (!ive) { >> + return false; >> + } >> + >> + ive->w &= ~IVE_VALID; >> + return true; >> +} >> diff --git a/hw/intc/xive-internal.h b/hw/intc/xive-internal.h >> new file mode 100644 >> index 000000000000..132b71a6daf0 >> --- /dev/null >> +++ b/hw/intc/xive-internal.h >> @@ -0,0 +1,41 @@ >> +/* >> + * QEMU PowerPC XIVE interrupt controller model >> + * >> + * Copyright (c) 2016-2017, IBM Corporation. >> + * >> + * This code is licensed under the GPL version 2 or later. See the >> + * COPYING file in the top-level directory. >> + */ >> + >> +#ifndef _INTC_XIVE_INTERNAL_H >> +#define _INTC_XIVE_INTERNAL_H >> + >> +/* Utilities to manipulate these (originaly from OPAL) */ >> +#define MASK_TO_LSH(m) (__builtin_ffsl(m) - 1) >> +#define GETFIELD(m, v) (((v) & (m)) >> MASK_TO_LSH(m)) >> +#define SETFIELD(m, v, val) \ >> + (((v) & ~(m)) | ((((typeof(v))(val)) << MASK_TO_LSH(m)) & (m))) >> + >> +/* IVE/EAS >> + * >> + * One per interrupt source. Targets that interrupt to a given EQ >> + * and provides the corresponding logical interrupt number (EQ data) >> + * >> + * We also map this structure to the escalation descriptor inside >> + * an EQ, though in that case the valid and masked bits are not used. >> + */ >> +typedef struct XiveIVE { >> + /* Use a single 64-bit definition to make it easier to >> + * perform atomic updates >> + */ >> + uint64_t w; >> +#define IVE_VALID PPC_BIT(0) >> +#define IVE_EQ_BLOCK PPC_BITMASK(4, 7) /* Destination EQ block# */ >> +#define IVE_EQ_INDEX PPC_BITMASK(8, 31) /* Destination EQ index */ >> +#define IVE_MASKED PPC_BIT(32) /* Masked */ >> +#define IVE_EQ_DATA PPC_BITMASK(33, 63) /* Data written to the EQ >> */ >> +} XiveIVE; >> + >> +XiveIVE *spapr_xive_get_ive(sPAPRXive *xive, uint32_t lisn); >> + >> +#endif /* _INTC_XIVE_INTERNAL_H */ >> diff --git a/include/hw/ppc/spapr_xive.h b/include/hw/ppc/spapr_xive.h >> new file mode 100644 >> index 000000000000..5b1f78e06a1e >> --- /dev/null >> +++ b/include/hw/ppc/spapr_xive.h >> @@ -0,0 +1,35 @@ >> +/* >> + * QEMU PowerPC sPAPR XIVE interrupt controller model >> + * >> + * Copyright (c) 2017, IBM Corporation. >> + * >> + * This code is licensed under the GPL version 2 or later. See the >> + * COPYING file in the top-level directory. >> + */ >> + >> +#ifndef PPC_SPAPR_XIVE_H >> +#define PPC_SPAPR_XIVE_H >> + >> +#include <hw/sysbus.h> >> + >> +typedef struct sPAPRXive sPAPRXive; >> +typedef struct XiveIVE XiveIVE; >> + >> +#define TYPE_SPAPR_XIVE "spapr-xive" >> +#define SPAPR_XIVE(obj) OBJECT_CHECK(sPAPRXive, (obj), TYPE_SPAPR_XIVE) >> + >> +struct sPAPRXive { >> + SysBusDevice parent; >> + >> + /* Properties */ >> + uint32_t nr_irqs; >> + >> + /* XIVE internal tables */ >> + XiveIVE *ivt; >> +}; >> + >> +bool spapr_xive_irq_enable(sPAPRXive *xive, uint32_t lisn); >> +bool spapr_xive_irq_disable(sPAPRXive *xive, uint32_t lisn); >> +void spapr_xive_pic_print_info(sPAPRXive *xive, Monitor *mon); >> + >> +#endif /* PPC_SPAPR_XIVE_H */ >