On 01/21/2018 02:24 PM, Marc-Andre Lureau wrote:
Hi
On Sun, Jan 21, 2018 at 6:46 AM, Stefan Berger
<stef...@linux.vnet.ibm.com> wrote:
On 01/20/2018 07:54 AM, Philippe Mathieu-Daudé wrote:
On 01/19/2018 11:11 AM, Marc-André Lureau wrote:
tpm_crb is a device for TPM 2.0 Command Response Buffer (CRB)
Interface as defined in TCG PC Client Platform TPM Profile (PTP)
Specification Family “2.0” Level 00 Revision 01.03 v22.
The PTP allows device implementation to switch between TIS and CRB
model at run time, but given that CRB is a simpler device to
implement, I chose to implement it as a different device.
The device doesn't implement other locality than 0 for now (my laptop
TPM doesn't either, so I assume this isn't so bad)
The command/reply memory region is statically allocated after the CRB
registers address TPM_CRB_ADDR_BASE + sizeof(struct crb_regs) (I
wonder if the BIOS could or should allocate it instead, or what size
to use, again this seems to fit well expectations)
The PTP doesn't specify a particular bus to put the device. So I added
it on the system bus directly, so it could hopefully be used easily on
a different platform than x86. Currently, it fails to init on piix,
because error_on_sysbus_device() check. The check may be changed in a
near future, see discussion on the qemu-devel ML.
Tested with some success with Linux upstream and Windows 10, seabios &
modified ovmf. The device is recognized and correctly transmit
command/response with passthrough & emu. However, we are missing PPI
ACPI part atm.
Signed-off-by: Marc-André Lureau <marcandre.lur...@redhat.com>
Signed-off-by: Stefan Berger <stef...@linux.vnet.ibm.com>
---
qapi/tpm.json | 5 +-
include/hw/acpi/tpm.h | 72 ++++++++
include/sysemu/tpm.h | 3 +
hw/i386/acpi-build.c | 34 +++-
hw/tpm/tpm_crb.c | 327
+++++++++++++++++++++++++++++++++++++
default-configs/i386-softmmu.mak | 1 +
default-configs/x86_64-softmmu.mak | 1 +
hw/tpm/Makefile.objs | 1 +
8 files changed, 434 insertions(+), 10 deletions(-)
create mode 100644 hw/tpm/tpm_crb.c
diff --git a/qapi/tpm.json b/qapi/tpm.json
index 7093f268fb..d50deef5e9 100644
--- a/qapi/tpm.json
+++ b/qapi/tpm.json
@@ -11,10 +11,11 @@
# An enumeration of TPM models
#
# @tpm-tis: TPM TIS model
+# @tpm-crb: TPM CRB model (since 2.12)
#
# Since: 1.5
##
-{ 'enum': 'TpmModel', 'data': [ 'tpm-tis' ] }
+{ 'enum': 'TpmModel', 'data': [ 'tpm-tis', 'tpm-crb' ] }
##
# @query-tpm-models:
@@ -28,7 +29,7 @@
# Example:
#
# -> { "execute": "query-tpm-models" }
-# <- { "return": [ "tpm-tis" ] }
+# <- { "return": [ "tpm-tis", "tpm-crb" ] }
#
##
{ 'command': 'query-tpm-models', 'returns': ['TpmModel'] }
diff --git a/include/hw/acpi/tpm.h b/include/hw/acpi/tpm.h
index 6d516c6a7f..b0048515fa 100644
--- a/include/hw/acpi/tpm.h
+++ b/include/hw/acpi/tpm.h
@@ -16,11 +16,82 @@
#ifndef HW_ACPI_TPM_H
#define HW_ACPI_TPM_H
+#include "qemu/osdep.h"
+
#define TPM_TIS_ADDR_BASE 0xFED40000
#define TPM_TIS_ADDR_SIZE 0x5000
#define TPM_TIS_IRQ 5
+struct crb_regs {
+ union {
+ uint32_t reg;
+ struct {
+ unsigned tpm_established:1;
+ unsigned loc_assigned:1;
+ unsigned active_locality:3;
+ unsigned reserved:2;
+ unsigned tpm_reg_valid_sts:1;
+ } bits;
I suppose this is little-endian layout, so this won't work on big-endian
hosts.
Can you add a qtest?
+ } loc_state;
+ uint32_t reserved1;
+ uint32_t loc_ctrl;
+ union {
+ uint32_t reg;
+ struct {
+ unsigned granted:1;
+ unsigned been_seized:1;
+ } bits;
This is unclear where you expect those bits (right/left aligned).
Can you add an unnamed field to be more explicit?
i.e. without using struct if left alignment expected:
unsigned granted:1, been_seized:1, :30;
I got rid of all the bitfields and this patch here makes it work on a ppc64
big endian and also x86_64 host:
https://github.com/stefanberger/qemu-tpm/commit/28fc07f0d9314168986190effd6d72d9fd3972dd
Thank you Stefan! I am all for squashing this fix to the patch. You
should then add your signed-off to the commit.
I'll do that.
The TIS is an ISA Device and the CRB is similar. Considering the
complications with the sysbus devices where one has to explicitly allow
it for a certain machine type, I would advocate to convert the CRB to an
ISA device. A patch that does that is this one:
https://github.com/stefanberger/qemu-tpm/commit/08c61bd666f82084c42621f4285bcac08fb4f713
Stefan