Ping
On Tue, Jan 11, 2011 at 10:42:31AM +0200, Alon Levy wrote:
> This patchset adds three new devices, usb-ccid, ccid-card-passthru and
> ccid-card-emulated, providing a CCID bus, a simple passthru protocol
> implementing card requiring a client, and a standalone emulated card.
>
> It also introduces a new directory libcaccard with CAC card emulation,
> CAC is a type of ISO 7816 smart card.
>
> Tree for pull: git://anongit.freedesktop.org/~alon/qemu usb_ccid.v15
>
> v14-v15 changes:
> * add patch with --enable-smartcard and --disable-smartcard and only
> disable ccid-card-emulated if nss not found.
> * add patch with description strings
> * s/libcaccard/libcacard/ in docs/ccid.txt
>
> v13-v14 changes:
> - support device_del/device_add on ccid-card-* and usb-ccid
> * usb-ccid:
> * lose card reference when card device deleted
> * check slot number and deny adding a slot if one is already added.
> * ccid-card-*: use qdev_simple_unplug_cb in both emulated and passthru ccid
> cards,
> the exitfn already takes care of triggering card removal in the usb dev.
> * libcacard:
> * remove double include of config-host.mak
> * add replay of card events to libcacard to support second and more
> emulation
> * don't initialize more then once (doesn't support it right now, so one
> thread, NSS thread, is left when device_del is done)
> * add VCARD_EMUL_INIT_ALREADY_INITED
> * ccid-card-emulated:
> * take correct mutexes on signaling to fix deadlocks on device_del
> * allow card insertion/removal event without proper reader insertion event
>
> v12-v13 changes:
> * libcacard:
> * fix Makefile clean to remove vscclient
> * fix double include of config-host in Makefile
> * usb-ccid: remove attach/detach logic, usb is always attached. Guest
> doesn't care if there is a reader attached with no card anyway.
> * ccid-card-passthru: don't close chr_dev on removal, makes it possible
> to use device_del/device_add to create remove/insertion for debugging.
>
> v11-v12 changes:
> * fix out of tree build
>
> v10-v11 changes:
> * fix last patch that removed one of the doc files.
> * updated flow table in docs/ccid.txt
>
> v8-v10 changes:
> * usb-ccid:
> * add slot for future use (Gerd)
> * ifdef ENABLE_MIGRATION for migration support on account of usb
> migration not being ready in general. (Gerd)
> * verbosified commit messages. (Gerd)
> * put libcacard docs in libcacard commit. (Gerd)
>
> v8-v9 changes:
> * Blue Swirl comments:
> * white space fixes
> * enabled by default, disabled only if missing nss
> * forgotten fix from v8 (don't build libcacard.so)
> * added a note about device being little endian
> * library renamed from libcaccard to libcacard
> * squashed both of libcacard patches, they touched different files anyway.
>
> v7-v8 changes:
> * Blue Swirl comments:
> * usb-ccid: deannonymize some structs
> * usb-ccid: coding style change - answer_t and bulk_in_t fixed
> * usb-ccid: handle endianess conversion between guest and host
> * usb-ccid: s/ccid_bulk_in_copy_out/ccid_bulk_in_copy_to_guest/
> * ccid-card-emulated: fix segfault if backend not specified
> * ccid-card-emulated: let last reader inserted win
> * libcaccard: remove double vscard_common.h
>
> v6->v7 changes:
> * external libcaccard became internal directory libcaccard
> * statically link object files into qemu
> * produce libcaccard.so for usage by external projects
> * applied coding style to new code (please check me)
> - did not use the qemu options parsing for libcaccard, since
> it seems to draw large amounts of qemu code (monitor for instance).
>
> v5->v6 changes:
> * really remove static debug (I apologize for claiming to have done so
> before)
>
> v4->v5 changes:
> * rebased to latest
> * remove static debug in card devices
> * fix --enable-smartcard to link
> * stall instead of assert when exceeding BULK_OUT_DATA_SIZE
> * make ccid_reserve_recv_buf for too large len discard message, not exit
> * make ccid_reserve_recv_buf return void*
> * fix typo
> * remove commented code in VMState
>
> v3->v4:
> * remove ccid field in CCIDBus
> * remove static debug in bus
> * add back docs
>
> v2->v3:
> * split into bus (usb-ccid.c, uses ccid.h) and card (ccid-card-passthru.c).
> * removed documentation (being revised).
>
> v1->v2:
> * all QSIMPLEQ turned into fixed sized rings
> * all allocated buffers turned into fixed size buffers
> * added migration support
> * added a message to tell client qemu has migrated to ip:port
> * for lack of monitor commands ip:port are 0:0, which causes the updated
> vscclient to connect to one port higher on the same host. will add monitor
> commands in a separate patch. tested with current setup.
>
> Alon Levy (6):
> usb-ccid: add CCID bus
> ccid: add passthru card device
> ccid: add ccid-card-emulated device (v2)
> ccid: add docs
> ccid: configure: add --enable/disable and nss only disable
> ccid: add qdev description strings
>
> Robert Relyea (1):
> libcacard: initial commit after coding style fixes
>
> Makefile | 6 +-
> Makefile.objs | 7 +
> Makefile.target | 2 +
> configure | 48 ++
> docs/ccid.txt | 135 +++++
> docs/libcacard.txt | 483 +++++++++++++++
> hw/ccid-card-emulated.c | 535 +++++++++++++++++
> hw/ccid-card-passthru.c | 273 +++++++++
> hw/ccid.h | 35 ++
> hw/usb-ccid.c | 1356
> +++++++++++++++++++++++++++++++++++++++++++
> libcacard/Makefile | 14 +
> libcacard/cac.c | 411 +++++++++++++
> libcacard/cac.h | 20 +
> libcacard/card_7816.c | 780 +++++++++++++++++++++++++
> libcacard/card_7816.h | 60 ++
> libcacard/card_7816t.h | 163 ++++++
> libcacard/config.h | 81 +++
> libcacard/event.c | 112 ++++
> libcacard/eventt.h | 28 +
> libcacard/link_test.c | 20 +
> libcacard/mutex.h | 59 ++
> libcacard/passthru.c | 612 +++++++++++++++++++
> libcacard/passthru.h | 50 ++
> libcacard/vcard.c | 350 +++++++++++
> libcacard/vcard.h | 85 +++
> libcacard/vcard_emul.h | 62 ++
> libcacard/vcard_emul_nss.c | 1171 +++++++++++++++++++++++++++++++++++++
> libcacard/vcard_emul_type.c | 60 ++
> libcacard/vcard_emul_type.h | 29 +
> libcacard/vcardt.h | 66 +++
> libcacard/vevent.h | 26 +
> libcacard/vreader.c | 526 +++++++++++++++++
> libcacard/vreader.h | 54 ++
> libcacard/vreadert.h | 23 +
> libcacard/vscard_common.h | 130 ++++
> libcacard/vscclient.c | 710 ++++++++++++++++++++++
> 36 files changed, 8580 insertions(+), 2 deletions(-)
> create mode 100644 docs/ccid.txt
> create mode 100644 docs/libcacard.txt
> create mode 100644 hw/ccid-card-emulated.c
> create mode 100644 hw/ccid-card-passthru.c
> create mode 100644 hw/ccid.h
> create mode 100644 hw/usb-ccid.c
> create mode 100644 libcacard/Makefile
> create mode 100644 libcacard/cac.c
> create mode 100644 libcacard/cac.h
> create mode 100644 libcacard/card_7816.c
> create mode 100644 libcacard/card_7816.h
> create mode 100644 libcacard/card_7816t.h
> create mode 100644 libcacard/config.h
> create mode 100644 libcacard/event.c
> create mode 100644 libcacard/eventt.h
> create mode 100644 libcacard/link_test.c
> create mode 100644 libcacard/mutex.h
> create mode 100644 libcacard/passthru.c
> create mode 100644 libcacard/passthru.h
> create mode 100644 libcacard/vcard.c
> create mode 100644 libcacard/vcard.h
> create mode 100644 libcacard/vcard_emul.h
> create mode 100644 libcacard/vcard_emul_nss.c
> create mode 100644 libcacard/vcard_emul_type.c
> create mode 100644 libcacard/vcard_emul_type.h
> create mode 100644 libcacard/vcardt.h
> create mode 100644 libcacard/vevent.h
> create mode 100644 libcacard/vreader.c
> create mode 100644 libcacard/vreader.h
> create mode 100644 libcacard/vreadert.h
> create mode 100644 libcacard/vscard_common.h
> create mode 100644 libcacard/vscclient.c
>
> --
> 1.7.3.4
>
>