The PIO Setup FIS is written in the PIO:Entry state, which comes before the ATA and ATAPI data transfer states. As a result, the PIO Setup FIS interrupt is now raised before DMA ends for ATAPI commands, and tests have to be adjusted.
This is also hinted by the description of the command header in the AHCI specification, where the "A" bit is described as When ‘1’, indicates that a PIO setup FIS shall be sent by the device indicating a transfer for the ATAPI command. and also by the description of the ACMD (ATAPI command region): The ATAPI command must be either 12 or 16 bytes in length. The length transmitted by the HBA is determined by the PIO setup FIS that is sent by the device requesting the ATAPI command. QEMU, which conflates the "generator" and the "receiver" of the FIS into one device, always uses ATAPI_PACKET_SIZE, aka 12, for the length. Signed-off-by: Paolo Bonzini <pbonz...@redhat.com> --- hw/ide/ahci.c | 15 ++++++--------- tests/libqos/ahci.c | 30 ++++++++++++++++++++++++++---- tests/libqos/ahci.h | 2 ++ 3 files changed, 34 insertions(+), 13 deletions(-) diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c index e22d7be05f..45ce195fb8 100644 --- a/hw/ide/ahci.c +++ b/hw/ide/ahci.c @@ -1291,11 +1291,12 @@ static void ahci_start_transfer(IDEDMA *dma) int is_write = opts & AHCI_CMD_WRITE; int is_atapi = opts & AHCI_CMD_ATAPI; int has_sglist = 0; + uint16_t fis_len; if (is_atapi && !ad->done_atapi_packet) { /* already prepopulated iobuffer */ ad->done_atapi_packet = true; - size = 0; + fis_len = size; goto out; } @@ -1315,19 +1316,15 @@ static void ahci_start_transfer(IDEDMA *dma) } } + /* Update number of transferred bytes, destroy sglist */ + dma_buf_commit(s, size); + fis_len = le32_to_cpu(ad->cur_cmd->status); out: /* declare that we processed everything */ s->data_ptr = s->data_end; - - /* Update number of transferred bytes, destroy sglist */ - dma_buf_commit(s, size); + ahci_write_fis_pio(ad, fis_len); s->end_transfer_func(s); - - if (!(s->status & DRQ_STAT)) { - /* done with PIO send/receive */ - ahci_write_fis_pio(ad, le32_to_cpu(ad->cur_cmd->status)); - } } static void ahci_start_dma(IDEDMA *dma, IDEState *s, diff --git a/tests/libqos/ahci.c b/tests/libqos/ahci.c index bc201d762b..04f33e246c 100644 --- a/tests/libqos/ahci.c +++ b/tests/libqos/ahci.c @@ -477,6 +477,23 @@ void ahci_port_check_d2h_sanity(AHCIQState *ahci, uint8_t port, uint8_t slot) g_free(d2h); } +void ahci_port_check_pio_sanity_atapi(AHCIQState *ahci, uint8_t port, + uint8_t slot) +{ + PIOSetupFIS *pio = g_malloc0(0x20); + + /* We cannot check the Status or E_Status registers, because + * the status may have again changed between the PIO Setup FIS + * and the conclusion of the command with the D2H Register FIS. */ + qtest_memread(ahci->parent->qts, ahci->port[port].fb + 0x20, pio, 0x20); + g_assert_cmphex(pio->fis_type, ==, 0x5f); + + g_assert(le16_to_cpu(pio->tx_count) == 12 || + le16_to_cpu(pio->tx_count) == 16); + + g_free(pio); +} + void ahci_port_check_pio_sanity(AHCIQState *ahci, uint8_t port, uint8_t slot, size_t buffsize) { @@ -831,9 +848,9 @@ void ahci_command_enable_atapi_dma(AHCICommand *cmd) RegH2DFIS *fis = &(cmd->fis); g_assert(cmd->props->atapi); fis->feature_low |= 0x01; - cmd->interrupts &= ~AHCI_PX_IS_PSS; + /* PIO is still used to transfer the ATAPI command */ + g_assert(cmd->props->pio); cmd->props->dma = true; - cmd->props->pio = false; /* BUG: We expect the DMA Setup interrupt for DMA commands */ /* cmd->interrupts |= AHCI_PX_IS_DSS; */ } @@ -845,7 +862,7 @@ AHCICommand *ahci_command_create(uint8_t command_name) g_assert(props); cmd = g_new0(AHCICommand, 1); - g_assert(!(props->dma && props->pio)); + g_assert(!(props->dma && props->pio) || props->atapi); g_assert(!(props->lba28 && props->lba48)); g_assert(!(props->read && props->write)); g_assert(!props->size || props->data); @@ -1216,7 +1233,12 @@ void ahci_command_verify(AHCIQState *ahci, AHCICommand *cmd) ahci_port_check_d2h_sanity(ahci, port, slot); } if (cmd->props->pio) { - ahci_port_check_pio_sanity(ahci, port, slot, cmd->xbytes); + /* For ATAPI, we might have only used PIO for the command. */ + if (cmd->props->atapi && (!cmd->xbytes || cmd->props->dma)) { + ahci_port_check_pio_sanity_atapi(ahci, port, slot); + } else { + ahci_port_check_pio_sanity(ahci, port, slot, cmd->xbytes); + } } } diff --git a/tests/libqos/ahci.h b/tests/libqos/ahci.h index 715ca1e226..cdba8099dd 100644 --- a/tests/libqos/ahci.h +++ b/tests/libqos/ahci.h @@ -598,6 +598,8 @@ void ahci_port_check_nonbusy(AHCIQState *ahci, uint8_t port, uint8_t slot); void ahci_port_check_d2h_sanity(AHCIQState *ahci, uint8_t port, uint8_t slot); void ahci_port_check_pio_sanity(AHCIQState *ahci, uint8_t port, uint8_t slot, size_t buffsize); +void ahci_port_check_pio_sanity_atapi(AHCIQState *ahci, uint8_t port, + uint8_t slot); void ahci_port_check_cmd_sanity(AHCIQState *ahci, AHCICommand *cmd); /* Misc */ -- 2.17.0