[Qemu-devel] [PULL 08/21] aspeed/i2c: Handle receive command in separate function

[Peter Maydell]

From: Guenter Roeck <li...@roeck-us.net>

Receive command handling may have to be deferred if a previous receive
done interrupt was not yet acknowledged. Move receive command handling
into a separate function to prepare for the necessary changes.

Signed-off-by: Guenter Roeck <li...@roeck-us.net>
Signed-off-by: Cédric Le Goater <c...@kaod.org>
Message-id: 20180914063506.20815-3-...@kaod.org
Reviewed-by: Peter Maydell <peter.mayd...@linaro.org>
Signed-off-by: Peter Maydell <peter.mayd...@linaro.org>
---
 hw/i2c/aspeed_i2c.c | 37 +++++++++++++++++++++----------------
 1 file changed, 21 insertions(+), 16 deletions(-)

diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c
index 9a3a232fb89..ce16efc1367 100644
--- a/hw/i2c/aspeed_i2c.c
+++ b/hw/i2c/aspeed_i2c.c
@@ -187,6 +187,26 @@ static uint8_t aspeed_i2c_get_state(AspeedI2CBus *bus)
     return (bus->cmd >> I2CD_TX_STATE_SHIFT) & I2CD_TX_STATE_MASK;
 }
 
+static void aspeed_i2c_handle_rx_cmd(AspeedI2CBus *bus)
+{
+    int ret;
+
+    aspeed_i2c_set_state(bus, I2CD_MRXD);
+    ret = i2c_recv(bus->bus);
+    if (ret < 0) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: read failed\n", __func__);
+        ret = 0xff;
+    } else {
+        bus->intr_status |= I2CD_INTR_RX_DONE;
+    }
+    bus->buf = (ret & I2CD_BYTE_BUF_RX_MASK) << I2CD_BYTE_BUF_RX_SHIFT;
+    if (bus->cmd & I2CD_M_S_RX_CMD_LAST) {
+        i2c_nack(bus->bus);
+    }
+    bus->cmd &= ~(I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST);
+    aspeed_i2c_set_state(bus, I2CD_MACTIVE);
+}
+
 /*
  * The state machine needs some refinement. It is only used to track
  * invalid STOP commands for the moment.
@@ -233,22 +253,7 @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, 
uint64_t value)
     }
 
     if (bus->cmd & (I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST)) {
-        int ret;
-
-        aspeed_i2c_set_state(bus, I2CD_MRXD);
-        ret = i2c_recv(bus->bus);
-        if (ret < 0) {
-            qemu_log_mask(LOG_GUEST_ERROR, "%s: read failed\n", __func__);
-            ret = 0xff;
-        } else {
-            bus->intr_status |= I2CD_INTR_RX_DONE;
-        }
-        bus->buf = (ret & I2CD_BYTE_BUF_RX_MASK) << I2CD_BYTE_BUF_RX_SHIFT;
-        if (bus->cmd & I2CD_M_S_RX_CMD_LAST) {
-            i2c_nack(bus->bus);
-        }
-        bus->cmd &= ~(I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST);
-        aspeed_i2c_set_state(bus, I2CD_MACTIVE);
+        aspeed_i2c_handle_rx_cmd(bus);
     }
 
     if (bus->cmd & I2CD_M_STOP_CMD) {
-- 
2.19.0