On Fri, Feb 25, 2011 at 4:55 AM, Wen Congyang <we...@cn.fujitsu.com> wrote: > At 02/24/2011 10:40 PM, William Dauchy Write: >> Hi, >> >> I got some troubles hot plugging network pci devices. An attach works >> as expected but the mac address is still set to "00:00:00:00:00:00" on >> the guest machine. I have to reboot the guest to get the correct mac >> address. >> I first tried through libvirt with: >> # virsh attach-interface dom0 network default --mac 52:54:00:f6:84:ba >> >> and then through qemu monitor to make sure that it wasn't a libvirt issue: >> device_add rtl8139 >> or >> device_add rtl8139,mac=01:02:03:04:05:06 >> >> Always the same result on the guest. A device info on qemu give the >> correct result, that is to say, with a correct mac address. >> I went through rtl8139.c and saw that the mac address is set in >> `rtl8139_reset`. >> This function was called in `pci_rtl8139_init` but removed since >> c169998802505c244b8bcad562633f29de7d74a4 commit, because it doesn't >> make sense to call it when the virtual machine is shutdown. >> I'm now wondering where I am supposed to call this reset function when >> live attaching a pci device. I think it could fix the mac address >> issue. >> I will be very pleased to receive some tips to create a patch for this issue. > > Please try the following patch. > > Thanks > Wen Congyang > > From efa0632f563a69dc299daaf4b235c1a0521d6e02 Mon Sep 17 00:00:00 2001 > From: Wen Congyang <we...@cn.fujitsu.com> > Date: Fri, 25 Feb 2011 09:56:27 +0800 > Subject: [PATCH] move eeprom init from reset function to init function > > --- > hw/pcnet-pci.c | 12 ++++++++++++ > hw/pcnet.c | 13 ------------- > hw/rtl8139.c | 24 ++++++++++++------------ > 3 files changed, 24 insertions(+), 25 deletions(-) > > diff --git a/hw/pcnet-pci.c b/hw/pcnet-pci.c > index 339a401..d7c4fc3 100644 > --- a/hw/pcnet-pci.c > +++ b/hw/pcnet-pci.c > @@ -270,6 +270,8 @@ static int pci_pcnet_init(PCIDevice *pci_dev) > PCIPCNetState *d = DO_UPCAST(PCIPCNetState, pci_dev, pci_dev); > PCNetState *s = &d->state; > uint8_t *pci_conf; > + int i; > + uint16_t checksum; > > #if 0 > printf("sizeof(RMD)=%d, sizeof(TMD)=%d\n", > @@ -292,6 +294,16 @@ static int pci_pcnet_init(PCIDevice *pci_dev) > pci_conf[PCI_MIN_GNT] = 0x06; > pci_conf[PCI_MAX_LAT] = 0xff; > > + /* Initialize the PROM */ > + > + memcpy(s->prom, s->conf.macaddr.a, 6); > + s->prom[12] = s->prom[13] = 0x00; > + s->prom[14] = s->prom[15] = 0x57; > + > + for (i = 0,checksum = 0; i < 16; i++)
Please add braces to fix the CODING_STYLE problem while moving. > + checksum += s->prom[i]; > + *(uint16_t *)&s->prom[12] = cpu_to_le16(checksum); This is not the right place, since lance.c uses the common part of pcnet.c. Please put the lines instead to pcnet_common_init(). > + // PCI vendor and device ID should be mirrored here Also here it would be nice to convert C99 comments to C89 while moving.