The test suite for the nRF51 GPIO peripheral for now only tests initial state. Additionally a set of tests testing an implementation detail of the model are included.
Signed-off-by: Steffen Görtz <cont...@steffen-goertz.de> --- tests/microbit-test.c | 122 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 122 insertions(+) diff --git a/tests/microbit-test.c b/tests/microbit-test.c index 981a36ed82..0ed64e1962 100644 --- a/tests/microbit-test.c +++ b/tests/microbit-test.c @@ -20,6 +20,7 @@ #include "hw/arm/nrf51.h" #include "hw/nvram/nrf51_nvm.h" +#include "hw/gpio/nrf51_gpio.h" #define FLASH_SIZE (256 * NRF51_PAGE_SIZE) @@ -100,6 +101,126 @@ static void test_nrf51_nvmc(void) } } +static void test_nrf51_gpio(void) +{ + size_t i; + uint32_t actual, expected; + + struct { + hwaddr addr; + uint32_t expected; + } reset_state[] = { + {NRF51_GPIO_REG_OUT, 0x00000000}, {NRF51_GPIO_REG_OUTSET, 0x00000000}, + {NRF51_GPIO_REG_OUTCLR, 0x00000000}, {NRF51_GPIO_REG_IN, 0x00000000}, + {NRF51_GPIO_REG_DIR, 0x00000000}, {NRF51_GPIO_REG_DIRSET, 0x00000000}, + {NRF51_GPIO_REG_DIRCLR, 0x00000000} + }; + + /* Check reset state */ + for (i = 0; i < ARRAY_SIZE(reset_state); i++) { + expected = reset_state[i].expected; + actual = readl(NRF51_GPIO_BASE + reset_state[i].addr); + g_assert_cmpuint(actual, ==, expected); + } + + for (i = 0; i < NRF51_GPIO_PINS; i++) { + expected = 0x00000002; + actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START + i * 4); + g_assert_cmpuint(actual, ==, expected); + } + + /* Check dir bit consistency between dir and cnf */ + /* Check set via DIRSET */ + expected = 0x80000001; + writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIRSET, expected); + actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR); + g_assert_cmpuint(actual, ==, expected); + actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START) & 0x01; + g_assert_cmpuint(actual, ==, 0x01); + actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_END) & 0x01; + g_assert_cmpuint(actual, ==, 0x01); + + /* Check clear via DIRCLR */ + writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIRCLR, 0x80000001); + actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR); + g_assert_cmpuint(actual, ==, 0x00000000); + actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START) & 0x01; + g_assert_cmpuint(actual, ==, 0x00); + actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_END) & 0x01; + g_assert_cmpuint(actual, ==, 0x00); + + /* Check set via DIR */ + expected = 0x80000001; + writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR, expected); + actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR); + g_assert_cmpuint(actual, ==, expected); + actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START) & 0x01; + g_assert_cmpuint(actual, ==, 0x01); + actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_END) & 0x01; + g_assert_cmpuint(actual, ==, 0x01); + + /* Reset DIR */ + writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR, 0x00000000); + + /* Check Input propagates */ + writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x00); + set_irq_in("/machine/nrf51", "unnamed-gpio-in", 0, 0); + actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01; + g_assert_cmpuint(actual, ==, 0x00); + set_irq_in("/machine/nrf51", "unnamed-gpio-in", 0, 1); + actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01; + g_assert_cmpuint(actual, ==, 0x01); + set_irq_in("/machine/nrf51", "unnamed-gpio-in", 0, -1); + actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01; + g_assert_cmpuint(actual, ==, 0x01); + writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x02); + + /* Check pull-up working */ + set_irq_in("/machine/nrf51", "unnamed-gpio-in", 0, 0); + writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0000); + actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01; + g_assert_cmpuint(actual, ==, 0x00); + writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b1110); + actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01; + g_assert_cmpuint(actual, ==, 0x01); + writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x02); + + /* Check pull-down working */ + set_irq_in("/machine/nrf51", "unnamed-gpio-in", 0, 1); + writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0000); + actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01; + g_assert_cmpuint(actual, ==, 0x01); + writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0110); + actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01; + g_assert_cmpuint(actual, ==, 0x00); + writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x02); + set_irq_in("/machine/nrf51", "unnamed-gpio-in", 0, -1); + + /* Check Output propagates */ + irq_intercept_out("/machine/nrf51"); + writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0011); + writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTSET, 0x01); + g_assert_true(get_irq(0)); + writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTCLR, 0x01); + g_assert_false(get_irq(0)); + + /* Check self-stimulation */ + writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b01); + writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTSET, 0x01); + actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01; + g_assert_cmpuint(actual, ==, 0x01); + + writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTCLR, 0x01); + actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01; + g_assert_cmpuint(actual, ==, 0x00); + + /* Check short-circuit - generates an guest_error which must be checked + manually as long as qtest can not scan qemu_log messages */ + writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b01); + writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTSET, 0x01); + set_irq_in("/machine/nrf51", "unnamed-gpio-in", 0, 0); +} + int main(int argc, char **argv) { int ret; @@ -109,6 +230,7 @@ int main(int argc, char **argv) global_qtest = qtest_initf("-machine microbit"); qtest_add_func("/microbit/nrf51/nvmc", test_nrf51_nvmc); + qtest_add_func("/microbit/nrf51/gpio", test_nrf51_gpio); ret = g_test_run(); -- 2.19.1