On Wed, 20 Feb 2019 23:39:53 +0100
Eric Auger <eric.au...@redhat.com> wrote:
> Up to now the memory map has been static and the high IO region
> base has always been 256GiB.
>
> This patch modifies the virt_set_memmap() function, which freezes
> the memory map, so that the high IO range base becomes floating,
> located after the initial RAM and the device memory.
>
> The function computes
> - the base of the device memory,
> - the size of the device memory and
> - the highest GPA used in the memory map.
>
> The two former will be used when defining the device memory region
> while the latter will be used at VM creation to choose the requested
> IPA size.
>
> Setting all the existing highmem IO regions beyond the RAM
> allows to have a single contiguous RAM region (initial RAM and
> possible hotpluggable device memory). That way we do not need
> to do invasive changes in the EDK2 FW to support a dynamic
> RAM base.
>
> Still the user cannot request an initial RAM size greater than 255GB.
> Also we handle the case where maxmem or slots options are passed,
> although no device memory is usable at the moment. In this case, we
> just ignore those settings.
>
> Signed-off-by: Eric Auger <eric.au...@redhat.com>
> ---
> hw/arm/virt.c | 47 ++++++++++++++++++++++++++++++++++---------
> include/hw/arm/virt.h | 3 +++
> 2 files changed, 41 insertions(+), 9 deletions(-)
>
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index 12039a0367..9db602457b 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -107,8 +107,9 @@
> * of a terabyte of RAM will be doing it on a host with more than a
> * terabyte of physical address space.)
> */
> -#define RAMLIMIT_GB 255
> -#define RAMLIMIT_BYTES (RAMLIMIT_GB * 1024ULL * 1024 * 1024)
> +#define RAMBASE GiB
> +#define LEGACY_RAMLIMIT_GB 255
> +#define LEGACY_RAMLIMIT_BYTES (LEGACY_RAMLIMIT_GB * GiB)
>
> /* Addresses and sizes of our components.
> * 0..128MB is space for a flash device so we can run bootrom code such as
> UEFI.
> @@ -149,7 +150,7 @@ static const MemMapEntry base_memmap[] = {
> [VIRT_PCIE_MMIO] = { 0x10000000, 0x2eff0000 },
> [VIRT_PCIE_PIO] = { 0x3eff0000, 0x00010000 },
> [VIRT_PCIE_ECAM] = { 0x3f000000, 0x01000000 },
> - [VIRT_MEM] = { 0x40000000, RAMLIMIT_BYTES },
> + [VIRT_MEM] = { RAMBASE, LEGACY_RAMLIMIT_BYTES },
> };
>
> /*
> @@ -1367,16 +1368,48 @@ static uint64_t virt_cpu_mp_affinity(VirtMachineState
> *vms, int idx)
>
> static void virt_set_memmap(VirtMachineState *vms)
> {
> + MachineState *ms = MACHINE(vms);
> hwaddr base;
> int i;
>
> + if (ms->maxram_size > ms->ram_size || ms->ram_slots > 0) {
> + error_report("mach-virt: does not support device memory: "
> + "ignore maxmem and slots options");
> + ms->maxram_size = ms->ram_size;
> + ms->ram_slots = 0;
> + }
> + if (ms->ram_size > (ram_addr_t)LEGACY_RAMLIMIT_BYTES) {
> + error_report("mach-virt: cannot model more than %dGB RAM",
> + LEGACY_RAMLIMIT_GB);
> + exit(1);
> + }
I'd drop these checks and amend below code so that it would init device_memory
logic when ram_slots > 0. It should simplify follow up patches by dropping
all machine version specific parts.
It shouldn't break old machines as layout stays the same but would allow to
start old machine with pc-dimms which is fine from migration pov as target
also should be able to start QEMU with the same options for migration to start.
> +
> vms->memmap = extended_memmap;
>
> for (i = 0; i < ARRAY_SIZE(base_memmap); i++) {
> vms->memmap[i] = base_memmap[i];
> }
>
> - vms->high_io_base = 256 * GiB; /* Top of the legacy initial RAM region */
> + /*
> + * We compute the base of the high IO region depending on the
> + * amount of initial and device memory. The device memory start/size
> + * is aligned on 1GiB. We never put the high IO region below 256GiB
> + * so that if maxram_size is < 255GiB we keep the legacy memory map.
> + * The device region size assumes 1GiB page max alignment per slot.
> + */
> + vms->device_memory_base = ROUND_UP(RAMBASE + ms->ram_size, GiB);
> + vms->device_memory_size = ms->maxram_size - ms->ram_size +
> + ms->ram_slots * GiB;
> +
> + vms->high_io_base = vms->device_memory_base +
> + ROUND_UP(vms->device_memory_size, GiB);
> + if (vms->high_io_base < vms->device_memory_base) {
> + error_report("maxmem/slots too huge");
> + exit(EXIT_FAILURE);
> + }
> + if (vms->high_io_base < 256 * GiB) {
> + vms->high_io_base = 256 * GiB;
> + }
> base = vms->high_io_base;
>
> for (i = VIRT_LOWMEMMAP_LAST; i < ARRAY_SIZE(extended_memmap); i++) {
> @@ -1387,6 +1420,7 @@ static void virt_set_memmap(VirtMachineState *vms)
> vms->memmap[i].size = size;
> base += size;
> }
> + vms->highest_gpa = base - 1;
> }
>
> static void machvirt_init(MachineState *machine)
> @@ -1470,11 +1504,6 @@ static void machvirt_init(MachineState *machine)
>
> vms->smp_cpus = smp_cpus;
>
> - if (machine->ram_size > vms->memmap[VIRT_MEM].size) {
> - error_report("mach-virt: cannot model more than %dGB RAM",
> RAMLIMIT_GB);
> - exit(1);
> - }
> -
> if (vms->virt && kvm_enabled()) {
> error_report("mach-virt: KVM does not support providing "
> "Virtualization extensions to the guest CPU");
> diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
> index 3dc7a6c5d5..acad0400d8 100644
> --- a/include/hw/arm/virt.h
> +++ b/include/hw/arm/virt.h
> @@ -132,6 +132,9 @@ typedef struct {
> uint32_t iommu_phandle;
> int psci_conduit;
> hwaddr high_io_base;
> + hwaddr highest_gpa;
> + hwaddr device_memory_base;
> + hwaddr device_memory_size;
> } VirtMachineState;
>
> #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM : VIRT_PCIE_ECAM)
