Co-developed-by: Mark Cave-Ayland <mark.cave-ayl...@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayl...@ilande.co.uk>
Signed-off-by: Laurent Vivier <laur...@vivier.eu>
Reviewed-by: Hervé Poussineau <hpous...@reactos.org>
---
hw/misc/Kconfig | 4 +
hw/misc/Makefile.objs | 1 +
hw/misc/mac_via.c | 667 ++++++++++++++++++++++++++++++++++++++
include/hw/misc/mac_via.h | 107 ++++++
4 files changed, 779 insertions(+)
create mode 100644 hw/misc/mac_via.c
create mode 100644 include/hw/misc/mac_via.h
diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig
index 385e1b0cec..87312c3abb 100644
--- a/hw/misc/Kconfig
+++ b/hw/misc/Kconfig
@@ -117,4 +117,8 @@ config AUX
bool
select I2C
+config MAC_VIA
+ bool
+ select MOS6522
+
source macio/Kconfig
diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
index 77b9df9796..ef0d0d5d9b 100644
--- a/hw/misc/Makefile.objs
+++ b/hw/misc/Makefile.objs
@@ -75,6 +75,7 @@ obj-$(CONFIG_ARMSSE_MHU) += armsse-mhu.o
obj-$(CONFIG_PVPANIC) += pvpanic.o
obj-$(CONFIG_AUX) += auxbus.o
obj-$(CONFIG_ASPEED_SOC) += aspeed_scu.o aspeed_sdmc.o
+obj-$(CONFIG_MAC_VIA) += mac_via.o
obj-$(CONFIG_MSF2) += msf2-sysreg.o
obj-$(CONFIG_NRF51_SOC) += nrf51_rng.o
diff --git a/hw/misc/mac_via.c b/hw/misc/mac_via.c
new file mode 100644
index 0000000000..baa87c2879
--- /dev/null
+++ b/hw/misc/mac_via.c
@@ -0,0 +1,667 @@
+/*
+ * QEMU m68k Macintosh VIA device support
+ *
+ * Copyright (c) 2011-2018 Laurent Vivier
+ * Copyright (c) 2018 Mark Cave-Ayland
+ *
+ * Some parts from hw/misc/macio/cuda.c
+ *
+ * Copyright (c) 2004-2007 Fabrice Bellard
+ * Copyright (c) 2007 Jocelyn Mayer
+ *
+ * some parts from linux-2.6.29, arch/m68k/include/asm/mac_via.h
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+#include "hw/sysbus.h"
+#include "qemu/timer.h"
+#include "hw/misc/mac_via.h"
+#include "hw/misc/mos6522.h"
+#include "hw/input/adb.h"
+#include "sysemu/sysemu.h"
+#include "qapi/error.h"
+#include "qemu/cutils.h"
+
+
+/*
+ * VIAs: There are two in every machine,
+ */
+
+#define VIA_SIZE (0x2000)
+
+/*
+ * Not all of these are true post MacII I think.
+ * CSA: probably the ones CHRP marks as 'unused' change purposes
+ * when the IWM becomes the SWIM.
+ * http://www.rs6000.ibm.com/resource/technology/chrpio/via5.mak.html
+ * ftp://ftp.austin.ibm.com/pub/technology/spec/chrp/inwork/CHRP_IORef_1.0.pdf
+ *
+ * also, http://developer.apple.com/technotes/hw/hw_09.html claims the
+ * following changes for IIfx:
+ * VIA1A_vSccWrReq not available and that VIA1A_vSync has moved to an IOP.
+ * Also, "All of the functionality of VIA2 has been moved to other chips".
+ */
+
+#define VIA1A_vSccWrReq 0x80 /* SCC write. (input)
+ * [CHRP] SCC WREQ: Reflects the state of the
+ * Wait/Request pins from the SCC.
+ * [Macintosh Family Hardware]
+ * as CHRP on SE/30,II,IIx,IIcx,IIci.
+ * on IIfx, "0 means an active request"
+ */
+#define VIA1A_vRev8 0x40 /* Revision 8 board ???
+ * [CHRP] En WaitReqB: Lets the WaitReq_L
+ * signal from port B of the SCC appear on
+ * the PA7 input pin. Output.
+ * [Macintosh Family] On the SE/30, this
+ * is the bit to flip screen buffers.
+ * 0=alternate, 1=main.
+ * on II,IIx,IIcx,IIci,IIfx this is a bit
+ * for Rev ID. 0=II,IIx, 1=IIcx,IIci,IIfx
+ */
+#define VIA1A_vHeadSel 0x20 /* Head select for IWM.
+ * [CHRP] unused.
+ * [Macintosh Family] "Floppy disk
+ * state-control line SEL" on all but IIfx
+ */
+#define VIA1A_vOverlay 0x10 /* [Macintosh Family] On SE/30,II,IIx,IIcx
+ * this bit enables the "Overlay" address
+ * map in the address decoders as it is on
+ * reset for mapping the ROM over the reset
+ * vector. 1=use overlay map.
+ * On the IIci,IIfx it is another bit of the
+ * CPU ID: 0=normal IIci, 1=IIci with parity
+ * feature or IIfx.
+ * [CHRP] En WaitReqA: Lets the WaitReq_L
+ * signal from port A of the SCC appear
+ * on the PA7 input pin (CHRP). Output.
+ * [MkLinux] "Drive Select"
+ * (with 0x20 being 'disk head select')
+ */
+#define VIA1A_vSync 0x08 /* [CHRP] Sync Modem: modem clock select:
+ * 1: select the external serial clock to
+ * drive the SCC's /RTxCA pin.
+ * 0: Select the 3.6864MHz clock to drive
+ * the SCC cell.
+ * [Macintosh Family] Correct on all but IIfx
+ */
+
+/* Macintosh Family Hardware sez: bits 0-2 of VIA1A are volume control
+ * on Macs which had the PWM sound hardware. Reserved on newer models.
+ * On IIci,IIfx, bits 1-2 are the rest of the CPU ID:
+ * bit 2: 1=IIci, 0=IIfx
+ * bit 1: 1 on both IIci and IIfx.
+ * MkLinux sez bit 0 is 'burnin flag' in this case.
+ * CHRP sez: VIA1A bits 0-2 and 5 are 'unused': if programmed as
+ * inputs, these bits will read 0.
+ */
+#define VIA1A_vVolume 0x07 /* Audio volume mask for PWM */
+#define VIA1A_CPUID0 0x02 /* CPU id bit 0 on RBV, others */
+#define VIA1A_CPUID1 0x04 /* CPU id bit 0 on RBV, others */
+#define VIA1A_CPUID2 0x10 /* CPU id bit 0 on RBV, others */
+#define VIA1A_CPUID3 0x40 /* CPU id bit 0 on RBV, others */
+
+/* Info on VIA1B is from Macintosh Family Hardware & MkLinux.
+ * CHRP offers no info. */
+#define VIA1B_vSound 0x80 /* Sound enable (for compatibility with
+ * PWM hardware) 0=enabled.
+ * Also, on IIci w/parity, shows parity error
+ * 0=error, 1=OK. */
+#define VIA1B_vMystery 0x40 /* On IIci, parity enable. 0=enabled,1=disabled
+ * On SE/30, vertical sync interrupt enable.
+ * 0=enabled. This vSync interrupt shows up
+ * as a slot $E interrupt. */
+#define VIA1B_vADBS2 0x20 /* ADB state input bit 1 (unused on IIfx) */
+#define VIA1B_vADBS1 0x10 /* ADB state input bit 0 (unused on IIfx) */
+#define VIA1B_vADBInt 0x08 /* ADB interrupt 0=interrupt (unused on IIfx)*/
+#define VIA1B_vRTCEnb 0x04 /* Enable Real time clock. 0=enabled. */
+#define VIA1B_vRTCClk 0x02 /* Real time clock serial-clock line. */
+#define VIA1B_vRTCData 0x01 /* Real time clock serial-data line. */
+
+/*
+ * VIA2 A register is the interrupt lines raised off the nubus
+ * slots.
+ * The below info is from 'Macintosh Family Hardware.'
+ * MkLinux calls the 'IIci internal video IRQ' below the 'RBV slot 0 irq.'
+ * It also notes that the slot $9 IRQ is the 'Ethernet IRQ' and
+ * defines the 'Video IRQ' as 0x40 for the 'EVR' VIA work-alike.
+ * Perhaps OSS uses vRAM1 and vRAM2 for ADB.
+ */
+
+#define VIA2A_vRAM1 0x80 /* RAM size bit 1 (IIci: reserved) */
+#define VIA2A_vRAM0 0x40 /* RAM size bit 0 (IIci: internal video IRQ) */
+#define VIA2A_vIRQE 0x20 /* IRQ from slot $E */
+#define VIA2A_vIRQD 0x10 /* IRQ from slot $D */
+#define VIA2A_vIRQC 0x08 /* IRQ from slot $C */
+#define VIA2A_vIRQB 0x04 /* IRQ from slot $B */
+#define VIA2A_vIRQA 0x02 /* IRQ from slot $A */
+#define VIA2A_vIRQ9 0x01 /* IRQ from slot $9 */
+
+/* RAM size bits decoded as follows:
+ * bit1 bit0 size of ICs in bank A
+ * 0 0 256 kbit
+ * 0 1 1 Mbit
+ * 1 0 4 Mbit
+ * 1 1 16 Mbit
+ */
+
+/*
+ * Register B has the fun stuff in it
+ */
+
+#define VIA2B_vVBL 0x80 /* VBL output to VIA1 (60.15Hz) driven by
+ * timer T1.
+ * on IIci, parity test: 0=test mode.
+ * [MkLinux] RBV_PARODD: 1=odd,0=even. */
+#define VIA2B_vSndJck 0x40 /* External sound jack status.
+ * 0=plug is inserted. On SE/30, always 0 */
+#define VIA2B_vTfr0 0x20 /* Transfer mode bit 0 ack from NuBus */
+#define VIA2B_vTfr1 0x10 /* Transfer mode bit 1 ack from NuBus */
+#define VIA2B_vMode32 0x08 /* 24/32bit switch - doubles as cache flush
+ * on II, AMU/PMMU control.
+ * if AMU, 0=24bit to 32bit translation
+ * if PMMU, 1=PMMU is accessing page table.
+ * on SE/30 tied low.
+ * on IIx,IIcx,IIfx, unused.
+ * on IIci/RBV, cache control. 0=flush cache.
+ */
+#define VIA2B_vPower 0x04 /* Power off, 0=shut off power.
+ * on SE/30 this signal sent to PDS card.
+ */
+#define VIA2B_vBusLk 0x02 /* Lock NuBus transactions, 0=locked.
+ * on SE/30 sent to PDS card.
+ */
+#define VIA2B_vCDis 0x01 /* Cache control. On IIci, 1=disable cache card
+ * on others, 0=disable processor's instruction
+ * and data caches.
+ */
+
+/* interrupt flags */
+
+#define IRQ_SET 0x80
+
+/* common */
+
+#define VIA_IRQ_TIMER1 0x40
+#define VIA_IRQ_TIMER2 0x20
+
+/* Apple sez: http://developer.apple.com/technotes/ov/ov_04.html
+ * Another example of a valid function that has no ROM support is the use
+ * of the alternate video page for page-flipping animation. Since there
+ * is no ROM call to flip pages, it is necessary to go play with the
+ * right bit in the VIA chip (6522 Versatile Interface Adapter).
+ * [CSA: don't know which one this is, but it's one of 'em!]
+ */
+
+/*
+ * 6522 registers - see databook.
+ * CSA: Assignments for VIA1 confirmed from CHRP spec.
+ */
+
+/* partial address decode. 0xYYXX : XX part for RBV, YY part for VIA */
+/* Note: 15 VIA regs, 8 RBV regs */
+
+#define vBufB 0x0000 /* [VIA/RBV] Register B */
+#define vBufAH 0x0200 /* [VIA only] Buffer A, with handshake. DON'T USE! */
+#define vDirB 0x0400 /* [VIA only] Data Direction Register B. */
+#define vDirA 0x0600 /* [VIA only] Data Direction Register A. */
+#define vT1CL 0x0800 /* [VIA only] Timer one counter low. */
+#define vT1CH 0x0a00 /* [VIA only] Timer one counter high. */
+#define vT1LL 0x0c00 /* [VIA only] Timer one latches low. */
+#define vT1LH 0x0e00 /* [VIA only] Timer one latches high. */
+#define vT2CL 0x1000 /* [VIA only] Timer two counter low. */
+#define vT2CH 0x1200 /* [VIA only] Timer two counter high. */
+#define vSR 0x1400 /* [VIA only] Shift register. */
+#define vACR 0x1600 /* [VIA only] Auxilary control register. */
+#define vPCR 0x1800 /* [VIA only] Peripheral control register. */
+ /* CHRP sez never ever to *write* this.
+ * Mac family says never to *change* this.
+ * In fact we need to initialize it once at start.
+ */
+#define vIFR 0x1a00 /* [VIA/RBV] Interrupt flag register. */
+#define vIER 0x1c00 /* [VIA/RBV] Interrupt enable register. */
+#define vBufA 0x1e00 /* [VIA/RBV] register A (no handshake) */
+
+/* from linux 2.6 drivers/macintosh/via-macii.c */
+
+/* Bits in ACR */
+
+#define VIA1ACR_vShiftCtrl 0x1c /* Shift register control bits
*/
+#define VIA1ACR_vShiftExtClk 0x0c /* Shift on external clock */
+#define VIA1ACR_vShiftOut 0x10 /* Shift out if 1 */
+
+/* Apple Macintosh Family Hardware Refenece
+ * Table 19-10 ADB transaction states
+ */
+
+#define VIA1B_vADB_StateMask (VIA1B_vADBS1 | VIA1B_vADBS2)
+#define VIA1B_vADB_StateShift 4
+
+#define VIA_TIMER_FREQ (783360)
+
+/* VIA returns time offset from Jan 1, 1904, not 1970 */
+#define RTC_OFFSET 2082844800
+
+
+static void via1_VBL(void *opaque)
+{
+ MacVIAState *m = opaque;
+ MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&m->mos6522_via1);
+ MOS6522State *s = MOS6522(v1s);
+ MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s);
+
+ s->ifr |= VIA1_IRQ_VBLANK;
+ mdc->update_irq(s);
+
+ timer_mod(m->VBL_timer, (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 16630)
+ / 16630 * 16630);
+}
+
+static void via1_one_second(void *opaque)
+{
+ MacVIAState *m = opaque;
+ MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&m->mos6522_via1);
+ MOS6522State *s = MOS6522(v1s);
+ MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s);
+
+ s->ifr |= VIA1_IRQ_ONE_SECOND;
+ mdc->update_irq(s);
+
+ timer_mod(m->one_second_timer, (qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL)
+ + 1000) / 1000 * 1000);
+}
+
+static void via1_irq_request(void *opaque, int irq, int level)
+{
+ MOS6522Q800VIA1State *v1s = opaque;
+ MOS6522State *s = MOS6522(v1s);
+ MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s);
+
+ if (level) {
+ s->ifr |= 1 << irq;
+ } else {
+ s->ifr &= ~(1 << irq);
+ }
+
+ mdc->update_irq(s);
+}
+
+static void via2_irq_request(void *opaque, int irq, int level)
+{
+ MOS6522Q800VIA2State *v2s = opaque;
+ MOS6522State *s = MOS6522(v2s);
+ MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s);
+
+ if (level) {
+ s->ifr |= 1 << irq;
+ } else {
+ s->ifr &= ~(1 << irq);
+ }
+
+ mdc->update_irq(s);
+}
+
+static void via1_rtc_update(MacVIAState *m)
+{
+ MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&m->mos6522_via1);
+ MOS6522State *s = MOS6522(v1s);
+
+ if (s->b & VIA1B_vRTCEnb) {
+ return;
+ }
+
+ if (s->dirb & VIA1B_vRTCData) {
+ /* send bits to the RTC */
+ if (!(v1s->last_b & VIA1B_vRTCClk) && (s->b & VIA1B_vRTCClk)) {
+ m->data_out <<= 1;
+ m->data_out |= s->b & VIA1B_vRTCData;
+ m->data_out_cnt++;
+ }
+ } else {
+ /* receive bits from the RTC */
+ if ((v1s->last_b & VIA1B_vRTCClk) &&
+ !(s->b & VIA1B_vRTCClk) &&
+ m->data_in_cnt) {
+ s->b = (s->b & ~VIA1B_vRTCData) |
+ ((m->data_in >> 7) & VIA1B_vRTCData);
+ m->data_in <<= 1;
+ m->data_in_cnt--;
+ }
+ }
+
+ if (m->data_out_cnt == 8) {
+ m->data_out_cnt = 0;
+
+ if (m->cmd == 0) {
+ if (m->data_out & 0x80) {
+ /* this is a read command */
+ uint32_t time = m->tick_offset +
+ (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) /
+ NANOSECONDS_PER_SECOND);
+ if (m->data_out == 0x81) { /* seconds register 0 */
+ m->data_in = time & 0xff;
+ m->data_in_cnt = 8;
+ } else if (m->data_out == 0x85) { /* seconds register 1 */
+ m->data_in = (time >> 8) & 0xff;
+ m->data_in_cnt = 8;
+ } else if (m->data_out == 0x89) { /* seconds register 2 */
+ m->data_in = (time >> 16) & 0xff;
+ m->data_in_cnt = 8;
+ } else if (m->data_out == 0x8d) { /* seconds register 3 */
+ m->data_in = (time >> 24) & 0xff;
+ m->data_in_cnt = 8;
+ } else if ((m->data_out & 0xf3) == 0xa1) {
+ /* PRAM address 0x10 -> 0x13 */
+ int addr = (m->data_out >> 2) & 0x03;
+ m->data_in = v1s->PRAM[addr];
+ m->data_in_cnt = 8;
+ } else if ((m->data_out & 0xf3) == 0xa1) {
+ /* PRAM address 0x00 -> 0x0f */
+ int addr = (m->data_out >> 2) & 0x0f;
+ m->data_in = v1s->PRAM[addr];
+ m->data_in_cnt = 8;
+ } else if ((m->data_out & 0xf8) == 0xb8) {
+ /* extended memory designator and sector number */
+ m->cmd = m->data_out;
+ }
+ } else {
+ /* this is a write command */
+ m->cmd = m->data_out;
+ }
+ } else {
+ if (m->cmd & 0x80) {
+ if ((m->cmd & 0xf8) == 0xb8) {
+ /* extended memory designator and sector number */
+ int sector = m->cmd & 0x07;
+ int addr = (m->data_out >> 2) & 0x1f;
+
+ m->data_in = v1s->PRAM[sector * 8 + addr];
+ m->data_in_cnt = 8;
+ }
+ } else if (!m->wprotect) {
+ /* this is a write command */
+ if (m->alt != 0) {
+ /* extended memory designator and sector number */
+ int sector = m->cmd & 0x07;
+ int addr = (m->alt >> 2) & 0x1f;
+
+ v1s->PRAM[sector * 8 + addr] = m->data_out;
+
+ m->alt = 0;
+ } else if (m->cmd == 0x01) { /* seconds register 0 */
+ /* FIXME */
+ } else if (m->cmd == 0x05) { /* seconds register 1 */
+ /* FIXME */
+ } else if (m->cmd == 0x09) { /* seconds register 2 */
+ /* FIXME */
+ } else if (m->cmd == 0x0d) { /* seconds register 3 */
+ /* FIXME */
+ } else if (m->cmd == 0x31) {
+ /* Test Register */
+ } else if (m->cmd == 0x35) {
+ /* Write Protect register */
+ m->wprotect = m->data_out & 1;
+ } else if ((m->cmd & 0xf3) == 0xa1) {
+ /* PRAM address 0x10 -> 0x13 */
+ int addr = (m->cmd >> 2) & 0x03;
+ v1s->PRAM[addr] = m->data_out;
+ } else if ((m->cmd & 0xf3) == 0xa1) {
+ /* PRAM address 0x00 -> 0x0f */
+ int addr = (m->cmd >> 2) & 0x0f;
+ v1s->PRAM[addr] = m->data_out;
+ } else if ((m->cmd & 0xf8) == 0xb8) {
+ /* extended memory designator and sector number */
+ m->alt = m->cmd;
+ }
+ }
+ }
+ m->data_out = 0;
+ }
+}
+
+static uint64_t mos6522_q800_via1_read(void *opaque, hwaddr addr, unsigned
size)
+{
+ MOS6522Q800VIA1State *s = MOS6522_Q800_VIA1(opaque);
+ MOS6522State *ms = MOS6522(s);
+
+ addr = (addr >> 9) & 0xf;
+ return mos6522_read(ms, addr, size);
+}
+
+static void mos6522_q800_via1_write(void *opaque, hwaddr addr, uint64_t val,
+ unsigned size)
+{
+ MOS6522Q800VIA1State *s = MOS6522_Q800_VIA1(opaque);
+ MOS6522State *ms = MOS6522(s);
+
+ addr = (addr >> 9) & 0xf;
+ mos6522_write(ms, addr, val, size);
+}
+
+static const MemoryRegionOps mos6522_q800_via1_ops = {
+ .read = mos6522_q800_via1_read,
+ .write = mos6522_q800_via1_write,
+ .endianness = DEVICE_BIG_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 1,
+ },
+};
+
+static uint64_t mos6522_q800_via2_read(void *opaque, hwaddr addr, unsigned
size)
+{
+ MOS6522Q800VIA2State *s = MOS6522_Q800_VIA2(opaque);
+ MOS6522State *ms = MOS6522(s);
+
+ addr = (addr >> 9) & 0xf;
+ return mos6522_read(ms, addr, size);
+}
+
+static void mos6522_q800_via2_write(void *opaque, hwaddr addr, uint64_t val,
+ unsigned size)
+{
+ MOS6522Q800VIA2State *s = MOS6522_Q800_VIA2(opaque);
+ MOS6522State *ms = MOS6522(s);
+
+ addr = (addr >> 9) & 0xf;
+ mos6522_write(ms, addr, val, size);
+}
+
+static const MemoryRegionOps mos6522_q800_via2_ops = {
+ .read = mos6522_q800_via2_read,
+ .write = mos6522_q800_via2_write,
+ .endianness = DEVICE_BIG_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 1,
+ },
+};
+
+static void mac_via_reset(DeviceState *dev)
+{
+ MacVIAState *m = MAC_VIA(dev);
+
+ timer_mod(m->VBL_timer, (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 16630)
+ / 16630 * 16630);
+
+ timer_mod(m->one_second_timer, (qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL)
+ + 1000) / 1000 * 1000);
+}
+
+static void mac_via_realize(DeviceState *dev, Error **errp)
+{
+ MacVIAState *m = MAC_VIA(dev);
+ MOS6522State *ms;
+ struct tm tm;
+
+ /* Init VIAs 1 and 2 */
+ sysbus_init_child_obj(OBJECT(dev), "via1", &m->mos6522_via1,
+ sizeof(m->mos6522_via1), TYPE_MOS6522_Q800_VIA1);
+
+ sysbus_init_child_obj(OBJECT(dev), "via2", &m->mos6522_via2,
+ sizeof(m->mos6522_via2), TYPE_MOS6522_Q800_VIA2);
+
+ /* Pass through mos6522 output IRQs */
+ ms = MOS6522(&m->mos6522_via1);
+ object_property_add_alias(OBJECT(dev), "irq[0]", OBJECT(ms),
+ SYSBUS_DEVICE_GPIO_IRQ "[0]", &error_abort);
+ ms = MOS6522(&m->mos6522_via2);
+ object_property_add_alias(OBJECT(dev), "irq[1]", OBJECT(ms),
+ SYSBUS_DEVICE_GPIO_IRQ "[0]", &error_abort);
+
+ /* Pass through mos6522 input IRQs */
+ qdev_pass_gpios(DEVICE(&m->mos6522_via1), dev, "via1-irq");
+ qdev_pass_gpios(DEVICE(&m->mos6522_via2), dev, "via2-irq");
+
+ /* VIA 1 */
+ m->one_second_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL, via1_one_second, m);
+ m->VBL_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, via1_VBL, m);
+
+ qemu_get_timedate(&tm, 0);
+ m->tick_offset = (uint32_t)mktimegm(&tm) + RTC_OFFSET;
+}
+
+static void mac_via_init(Object *obj)
+{
+ SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+ MacVIAState *m = MAC_VIA(obj);
+
+ /* MMIO */
+ memory_region_init(&m->mmio, obj, "mac-via", 2 * VIA_SIZE);
+ sysbus_init_mmio(sbd, &m->mmio);
+
+ memory_region_init_io(&m->via1mem, obj, &mos6522_q800_via1_ops,
+ &m->mos6522_via1, "via1", VIA_SIZE);
+ memory_region_add_subregion(&m->mmio, 0x0, &m->via1mem);
+
+ memory_region_init_io(&m->via2mem, obj, &mos6522_q800_via2_ops,
+ &m->mos6522_via2, "via2", VIA_SIZE);
+ memory_region_add_subregion(&m->mmio, VIA_SIZE, &m->via2mem);
+
+ /* ADB */
+ qbus_create_inplace((BusState *)&m->adb_bus, sizeof(m->adb_bus),
+ TYPE_ADB_BUS, DEVICE(obj), "adb.0");
+}
+
+static void mac_via_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+
+ dc->realize = mac_via_realize;
+ dc->reset = mac_via_reset;
+}
+
+static TypeInfo mac_via_info = {
+ .name = TYPE_MAC_VIA,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(MacVIAState),
+ .instance_init = mac_via_init,
+ .class_init = mac_via_class_init,
+};
+
+/* VIA 1 */
+static void mos6522_q800_via1_portB_write(MOS6522State *s)
+{
+ MOS6522Q800VIA1State *v1s = container_of(s, MOS6522Q800VIA1State,
+ parent_obj);
+ MacVIAState *m = container_of(v1s, MacVIAState, mos6522_via1);
+
+ via1_rtc_update(m);
+
+ v1s->last_b = s->b;
+}
+
+static void mos6522_q800_via1_reset(DeviceState *dev)
+{
+ MOS6522State *ms = MOS6522(dev);
+ MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(ms);
+
+ mdc->parent_reset(dev);
+
+ ms->timers[0].frequency = VIA_TIMER_FREQ;
+ ms->timers[1].frequency = VIA_TIMER_FREQ;
+
+ ms->b = VIA1B_vADB_StateMask | VIA1B_vADBInt | VIA1B_vRTCEnb;
+}
+
+static void mos6522_q800_via1_init(Object *obj)
+{
+ qdev_init_gpio_in_named(DEVICE(obj), via1_irq_request, "via1-irq",
+ VIA1_IRQ_NB);
+}
+
+static void mos6522_q800_via1_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ MOS6522DeviceClass *mdc = MOS6522_DEVICE_CLASS(oc);
+
+ dc->reset = mos6522_q800_via1_reset;
+ mdc->portB_write = mos6522_q800_via1_portB_write;
+}
+
+static const TypeInfo mos6522_q800_via1_type_info = {
+ .name = TYPE_MOS6522_Q800_VIA1,
+ .parent = TYPE_MOS6522,
+ .instance_size = sizeof(MOS6522Q800VIA1State),
+ .instance_init = mos6522_q800_via1_init,
+ .class_init = mos6522_q800_via1_class_init,
+};
+
+/* VIA 2 */
+static void mos6522_q800_via2_portB_write(MOS6522State *s)
+{
+ if (s->dirb & VIA2B_vPower && (s->b & VIA2B_vPower) == 0) {
+ /* shutdown */
+ qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
+ }
+}
+
+static void mos6522_q800_via2_reset(DeviceState *dev)
+{
+ MOS6522State *ms = MOS6522(dev);
+ MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(ms);
+
+ mdc->parent_reset(dev);
+
+ ms->timers[0].frequency = VIA_TIMER_FREQ;
+ ms->timers[1].frequency = VIA_TIMER_FREQ;
+
+ ms->dirb = 0;
+ ms->b = 0;
+}
+
+static void mos6522_q800_via2_init(Object *obj)
+{
+ qdev_init_gpio_in_named(DEVICE(obj), via2_irq_request, "via2-irq",
+ VIA2_IRQ_NB);
+}
+
+static void mos6522_q800_via2_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ MOS6522DeviceClass *mdc = MOS6522_DEVICE_CLASS(oc);
+
+ dc->reset = mos6522_q800_via2_reset;
+ mdc->portB_write = mos6522_q800_via2_portB_write;
+}
+
+static const TypeInfo mos6522_q800_via2_type_info = {
+ .name = TYPE_MOS6522_Q800_VIA2,
+ .parent = TYPE_MOS6522,
+ .instance_size = sizeof(MOS6522Q800VIA2State),
+ .instance_init = mos6522_q800_via2_init,
+ .class_init = mos6522_q800_via2_class_init,
+};
+
+static void mac_via_register_types(void)
+{
+ type_register_static(&mos6522_q800_via1_type_info);
+ type_register_static(&mos6522_q800_via2_type_info);
+ type_register_static(&mac_via_info);
+}
+
+type_init(mac_via_register_types);
diff --git a/include/hw/misc/mac_via.h b/include/hw/misc/mac_via.h
new file mode 100644
index 0000000000..69bdecabb0
--- /dev/null
+++ b/include/hw/misc/mac_via.h
@@ -0,0 +1,107 @@
+/*
+ *
+ * Copyright (c) 2011-2018 Laurent Vivier
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#ifndef HW_MISC_MAC_VIA_H
+#define HW_MISC_MAC_VIA_H
+
+#include "exec/memory.h"
+#include "hw/sysbus.h"
+#include "hw/misc/mos6522.h"
+
+
+/* VIA 1 */
+#define VIA1_IRQ_ONE_SECOND_BIT 0
+#define VIA1_IRQ_VBLANK_BIT 1
+#define VIA1_IRQ_ADB_READY_BIT 2
+#define VIA1_IRQ_ADB_DATA_BIT 3
+#define VIA1_IRQ_ADB_CLOCK_BIT 4
+
+#define VIA1_IRQ_NB 8
+
+#define VIA1_IRQ_ONE_SECOND (1 << VIA1_IRQ_ONE_SECOND_BIT)
+#define VIA1_IRQ_VBLANK (1 << VIA1_IRQ_VBLANK_BIT)
+#define VIA1_IRQ_ADB_READY (1 << VIA1_IRQ_ADB_READY_BIT)
+#define VIA1_IRQ_ADB_DATA (1 << VIA1_IRQ_ADB_DATA_BIT)
+#define VIA1_IRQ_ADB_CLOCK (1 << VIA1_IRQ_ADB_CLOCK_BIT)
+
+
+#define TYPE_MOS6522_Q800_VIA1 "mos6522-q800-via1"
+#define MOS6522_Q800_VIA1(obj) OBJECT_CHECK(MOS6522Q800VIA1State, (obj), \
+ TYPE_MOS6522_Q800_VIA1)
+
+typedef struct MOS6522Q800VIA1State {
+ /*< private >*/
+ MOS6522State parent_obj;
+
+ qemu_irq irqs[VIA1_IRQ_NB];
+ uint8_t last_b;
+ uint8_t PRAM[256];
+} MOS6522Q800VIA1State;
+
+
+/* VIA 2 */
+#define VIA2_IRQ_SCSI_DATA_BIT 0
+#define VIA2_IRQ_SLOT_BIT 1
+#define VIA2_IRQ_UNUSED_BIT 2
+#define VIA2_IRQ_SCSI_BIT 3
+#define VIA2_IRQ_ASC_BIT 4
+
+#define VIA2_IRQ_NB 8
+
+#define VIA2_IRQ_SCSI_DATA (1 << VIA2_IRQ_SCSI_DATA_BIT)
+#define VIA2_IRQ_SLOT (1 << VIA2_IRQ_SLOT_BIT)
+#define VIA2_IRQ_UNUSED (1 << VIA2_IRQ_SCSI_BIT)
+#define VIA2_IRQ_SCSI (1 << VIA2_IRQ_UNUSED_BIT)
+#define VIA2_IRQ_ASC (1 << VIA2_IRQ_ASC_BIT)
+
+#define TYPE_MOS6522_Q800_VIA2 "mos6522-q800-via2"
+#define MOS6522_Q800_VIA2(obj) OBJECT_CHECK(MOS6522Q800VIA2State, (obj), \
+ TYPE_MOS6522_Q800_VIA2)
+
+typedef struct MOS6522Q800VIA2State {
+ /*< private >*/
+ MOS6522State parent_obj;
+} MOS6522Q800VIA2State;
+
+
+#define TYPE_MAC_VIA "mac_via"
+#define MAC_VIA(obj) OBJECT_CHECK(MacVIAState, (obj), TYPE_MAC_VIA)
+
+typedef struct MacVIAState {
+ SysBusDevice busdev;
+
+ /* MMIO */
+ MemoryRegion mmio;
+ MemoryRegion via1mem;
+ MemoryRegion via2mem;
+
+ /* VIAs */
+ MOS6522Q800VIA1State mos6522_via1;
+ MOS6522Q800VIA2State mos6522_via2;
+
+ /* RTC */
+ uint32_t tick_offset;
+
+ uint8_t data_out;
+ int data_out_cnt;
+ uint8_t data_in;
+ uint8_t data_in_cnt;
+ uint8_t cmd;
+ int wprotect;
+ int alt;
+
+ /* ADB */
+ ADBBusState adb_bus;
+
+ /* external timers */
+ QEMUTimer *one_second_timer;
+ QEMUTimer *VBL_timer;
+
+} MacVIAState;
+
+#endif
--
2.21.0
