From: Hikaru Nishida <hikaru...@gmail.com>
This commit adds No Op Command (23) to xHC for verifying the operation
of the Command Ring mechanisms.
No Op Command is defined in XHCI spec (4.6.2) and just reports Command
Completion Event with Completion Code == Success.
Before this commit, No Op Command is not implemented so xHC reports
Command Completion Event with Completion Code == TRB Error. This commit
fixes this behaviour to report Completion Code correctly.
Signed-off-by: Hikaru Nishida <hikaru...@gmail.com>
---
hw/usb/hcd-xhci.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/hw/usb/hcd-xhci.c b/hw/usb/hcd-xhci.c
index 5894a18663..5ceff78280 100644
--- a/hw/usb/hcd-xhci.c
+++ b/hw/usb/hcd-xhci.c
@@ -2542,6 +2542,9 @@ static void xhci_process_commands(XHCIState *xhci)
case CR_GET_PORT_BANDWIDTH:
event.ccode = xhci_get_port_bandwidth(xhci, trb.parameter);
break;
+ case CR_NOOP:
+ event.ccode = CC_SUCCESS;
+ break;
case CR_VENDOR_NEC_FIRMWARE_REVISION:
if (xhci->nec_quirks) {
event.type = 48; /* NEC reply */
--
2.20.1 (Apple Git-117)
