use PCIDeviceInfo to initialize ids.
Signed-off-by: Isaku Yamahata <yamah...@valinux.co.jp>
---
hw/rtl8139.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/hw/rtl8139.c b/hw/rtl8139.c
index c7c7a3c..34e3a9e 100644
--- a/hw/rtl8139.c
+++ b/hw/rtl8139.c
@@ -3453,10 +3453,6 @@ static int pci_rtl8139_init(PCIDevice *dev)
uint8_t *pci_conf;
pci_conf = s->dev.config;
- pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_REALTEK);
- pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_REALTEK_8139);
- pci_conf[PCI_REVISION_ID] = RTL8139_PCI_REVID; /* >=0x20 is for 8139C+ */
- pci_config_set_class(pci_conf, PCI_CLASS_NETWORK_ETHERNET);
pci_conf[PCI_INTERRUPT_PIN] = 1; /* interrupt pin 0 */
/* TODO: start of capability list, but no capability
* list bit in status register, and offset 0xdc seems unused. */
@@ -3510,6 +3506,10 @@ static PCIDeviceInfo rtl8139_info = {
.init = pci_rtl8139_init,
.exit = pci_rtl8139_uninit,
.romfile = "pxe-rtl8139.rom",
+ .vendor_id = PCI_VENDOR_ID_REALTEK,
+ .device_id = PCI_DEVICE_ID_REALTEK_8139,
+ .revision = RTL8139_PCI_REVID, /* >=0x20 is for 8139C+ */
+ .class_id = PCI_CLASS_NETWORK_ETHERNET,
.qdev.props = (Property[]) {
DEFINE_NIC_PROPERTIES(RTL8139State, conf),
DEFINE_PROP_END_OF_LIST(),
--
1.7.1.1
