this revision has a bug, flag C is not calculated correctly. On Tue, Oct 22, 2019 at 1:37 AM Michael Rolnik <mrol...@gmail.com> wrote: > > This series of patches adds 8bit AVR cores to QEMU. > All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully tested > yet. > However I was able to execute simple code with functions. e.g fibonacci > calculation. > This series of patches include a non real, sample board. > No fuses support yet. PC is set to 0 at reset. > > the patches include the following > 1. just a basic 8bit AVR CPU, without instruction decoding or translation > 2. CPU features which allow define the following 8bit AVR cores > avr1 > avr2 avr25 > avr3 avr31 avr35 > avr4 > avr5 avr51 > avr6 > xmega2 xmega4 xmega5 xmega6 xmega7 > 3. a definition of sample machine with SRAM, FLASH and CPU which allows to > execute simple code > 4. encoding for all AVR instructions > 5. interrupt handling > 6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions > 7. a decoder which given an opcode decides what istruction it is > 8. translation of AVR instruction into TCG > 9. all features together > > changes since v3 > 1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of 0x000000ff) > for faster address manipulaton > 2. ffs changed to ctz32 > 3. duplicate code removed at avr_cpu_do_interrupt > 4. using andc instead of not + and > 5. fixing V flag calculation in varios instructions > 6. freeing local variables in PUSH > 7. tcg_const_local_i32 -> tcg_const_i32 > 8. using sextract32 instead of my implementation > 9. fixing BLD instruction > 10.xor(r) instead of 0xff - r at COM > 11.fixing MULS/MULSU not to modify inputs' content > 12.using SUB for NEG > 13.fixing tcg_gen_qemu_ld/st call in XCH > > changes since v4 > 1. target is now defined as big endian in order to optimize push_ret/pop_ret > 2. all style warnings are fixed > 3. adding cpu_set/get_sreg functions > 4. simplifying gen_goto_tb as there is no real paging > 5. env->pc -> env->pc_w > 6. making flag dump more compact > 7. more spacing > 8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX > 9. removing avr_set_feature > 10. SPL/SPH set bug fix > 11. switching stb_phys to cpu_stb_data > 12. cleaning up avr_decode > 13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm) > 14. saving CPU features (savevm) > > changes since v5 > 1. BLD bug fix > 2. decoder generator is added > > chages since v6 > 1. using cpu_get_sreg/cpu_set_sreg in > avr_cpu_gdb_read_register/avr_cpu_gdb_write_register > 2. configure the target as little endian because otherwise GDB does not work > 3. fixing and testing gen_push_ret/gen_pop_ret > > changes since v7 > 1. folding back v6 > 2. logging at helper_outb and helper_inb are done for non supported yet > registers only > 3. MAINTAINERS updated > > changes since v8 > 1. removing hw/avr from hw/Makefile.obj as it should not be built for all > 2. making linux compilable > 3. testing on > a. Mac, Apple LLVM version 7.0.0 > b. Ubuntu 12.04, gcc 4.9.2 > c. Fedora 23, gcc 5.3.1 > 4. folding back some patches > 5. translation bug fixes for ORI, CPI, XOR instructions > 6. propper handling of cpu register writes though memory > > changes since v9 > 1. removing forward declarations of static functions > 2. disabling debug prints > 3. switching to case range instead of if else if ... > 4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any > device > 5. commenst about sample board and sample IO device added > 6. sample board description is more descriptive now > 7. memory_region_allocate_system_memory is used to create RAM > 8. now there are helper_fullrd & helper_fullwr when LD/ST try to access > registers > > changes since v10 > 1. movig back fullwr & fullrd into the commit where outb and inb were > introduced > 2. changing tlb_fill function signature > 3. adding empty line between functions > 4. adding newline on the last line of the file > 5. using tb->flags to generae full access ST/LD instructions > 6. fixing SBRC bug > 7. folding back 10th commit > 8. whenever a new file is introduced it's added to Makefile.objs > > changes since v11 > 1. updating to v2.7.0-rc > 2. removing assignment to env->fullacc from gen_intermediate_code > > changes since v12 > 1. fixing spacing > 2. fixing get/put_segment functions > 3. removing target-avr/machine.h file > 4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE > 5. comment spelling > 6. removing hw/avr/sample_io.c > 7. char const* -> const char* > 8. proper ram allocation > 9. fixing breakpoint functionality. > 10.env1 -> env > 11.fixing avr_cpu_gdb_write_register & avr_cpu_gdb_read_register functions > 12.any cpu is removed > 12.feature bits are not saved into vm state > > changes since v13 > 1. rebasing to v2.7.0-rc1 > > changes since v14 > 1. I made self review with git gui tool. (I did not know such a thing exists) > 2. removing all double/tripple spaces > 3. removing comment reference to SampleIO > 4. folding back some changes, so there is not deleted lines in my code > 5. moving avr configuration, within configure file, before chris > > changes since v15 > 1. removing IO registers cache from CPU > 2. implementing CBI/SBI as read(helper_inb), modify, write(helper_outb) > 3. implementing CBIC/SBIC as read(helper_inb), check, branch > 4. adding missing tcg_temp_free_i32 for tcg_const_i32 > > changes since v16 > 1. removing EXT IO registers knoledge from CPU. These registers are accessible > by LD/ST only. CPU has no interest in them > > changes since v17 (by Richard Henderson) > This is Michael's v17, with some adjustments of my own: > > 1. Fix the whitespace errors reported by "git am", > 2. Replace the utf-8 characters with normal ascii, > 3. Ditch the separate compilation of translate.c. > > I retained the two separate files that could be regenerated > from the included cpugen program, but merged in translate-insn.c. > Not that it matters, but the code generated is about 3k smaller. > > changes since v18 > 1. moving target-avr into target/avr > 2. do not call cpu_exec_initfn function from avr_cpu_initfn > 3. call cpu_exec_realizefn avr_cpu_realizefn > 4. do not fail sample machine creation if no rom is suplied > 5. add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code > 6. fix a register getters/setters in machine.c > 7. changing QEMU_ARCH_AVR from 1<<17 to 1<<18 > > changes since v19 > 1. use decodetree.py tool to decode instructions > 2. adding USART > 3. adding 16 bit timer peripherals > 4. changing QEMU_ARCH_AVR from 1<<18 to 1<<20 > 5. renaming tlb_fill to avr_cpu_tlb_fill > > changes since v20 > 1. use one CPU naming convention > 2. merging insn16.decode & insn32.decode files > 3. modifying skip next instruction mechanizm > 4. translate BREAK as NOP for now > > changes since v21 > 1. Reorganize bstate. > This will make transition to <exec/translator.h> easier, and fixes a > couple of bugs wrt single stepping > by richard.hender...@linaro.org > 2. Drop cpc and fix page cross condition. > by richard.hender...@linaro.org > 3. Refactor checking supported/unsupported instructions > 4. Add gdb-xml/avr-cpu.xml > > changes since v22 > 1. Rebase > 2. Split long comment > > changes since v23 > 1. remove avr_cpu_list_compare function > 2. modify avr_cpu_class_by_name function > 3. modify avr_cpu_list_entry function > 4. modify avr_cpu_list function > > changes since v24 > 1. remove AVR_CPU_TYPE_NAME macro > > changes since v25 > 1. fix patches. every file belong to one patch only > 2. change copyright year from 2016 to 2019 > 3. create mask device to emulate prr0/prr1 > > changes since v26 > 1. add avocado acceptence test > 2. add boot serial test > > changes since v27 > 1. list atmel2560 devices as unimplemented > 2. fix sram base/size > > changes since v28 > 1. rebase > 2. fix includes & build > > changes since v29 > 1. fixing ownership > 2. using 'since' instread of 'added in' > > changes since v30 > 1. rebase > > changes since v31 > 1. splitting 'Add instruction translation' commit > 2. fixing typo in qapi/machine.json sicne -> since > 3. removing unintended changes in configure file > 4. adding Richard Henderson as a co developer to 'Add instruction > translation - CPU main translation funcions' commit > > changes since v32 > 1. modify cpu_get_sreg to treat sreg C as other flags, except sreg Z > > Michael Rolnik (12): > target/avr: Add outward facing interfaces and core CPU logic > target/avr: Add instruction helpers > target/avr: Add instruction decoding > target/avr: Add instruction translation - Registers definition > target/avr: Add instruction translation - Arithmetic and Logic > Instructions > target/avr: Add instruction translation - Branch Instructions > target/avr: Add instruction translation - Bit and Bit-test > Instructions > target/avr: Add instruction translation - MCU Control Instructions > target/avr: Add instruction translation - CPU main translation > function > target/avr: Add example board configuration > target/avr: Register AVR support with the rest of QEMU, the build > system, and the WMAINTAINERS file > target/avr: Add tests > > Sarah Harris (1): > target/avr: Add limited support for USART and 16 bit timer peripherals > > MAINTAINERS | 9 + > arch_init.c | 2 + > configure | 7 + > default-configs/avr-softmmu.mak | 5 + > gdb-xml/avr-cpu.xml | 49 + > hw/Kconfig | 1 + > hw/avr/Kconfig | 6 + > hw/avr/Makefile.objs | 1 + > hw/avr/sample.c | 282 +++ > hw/char/Kconfig | 3 + > hw/char/Makefile.objs | 1 + > hw/char/avr_usart.c | 324 ++++ > hw/misc/Kconfig | 3 + > hw/misc/Makefile.objs | 2 + > hw/misc/avr_mask.c | 112 ++ > hw/timer/Kconfig | 3 + > hw/timer/Makefile.objs | 1 + > hw/timer/avr_timer16.c | 605 ++++++ > include/disas/dis-asm.h | 6 + > include/hw/char/avr_usart.h | 97 + > include/hw/misc/avr_mask.h | 47 + > include/hw/timer/avr_timer16.h | 97 + > include/sysemu/arch_init.h | 1 + > qapi/machine.json | 3 +- > target/avr/Makefile.objs | 33 + > target/avr/cpu-param.h | 37 + > target/avr/cpu-qom.h | 54 + > target/avr/cpu.c | 576 ++++++ > target/avr/cpu.h | 254 +++ > target/avr/gdbstub.c | 85 + > target/avr/helper.c | 354 ++++ > target/avr/helper.h | 29 + > target/avr/insn.decode | 175 ++ > target/avr/machine.c | 121 ++ > target/avr/translate.c | 3016 ++++++++++++++++++++++++++++++ > tests/Makefile.include | 2 + > tests/acceptance/machine_avr6.py | 36 + > tests/boot-serial-test.c | 10 + > tests/machine-none-test.c | 1 + > 39 files changed, 6449 insertions(+), 1 deletion(-) > create mode 100644 default-configs/avr-softmmu.mak > create mode 100644 gdb-xml/avr-cpu.xml > create mode 100644 hw/avr/Kconfig > create mode 100644 hw/avr/Makefile.objs > create mode 100644 hw/avr/sample.c > create mode 100644 hw/char/avr_usart.c > create mode 100644 hw/misc/avr_mask.c > create mode 100644 hw/timer/avr_timer16.c > create mode 100644 include/hw/char/avr_usart.h > create mode 100644 include/hw/misc/avr_mask.h > create mode 100644 include/hw/timer/avr_timer16.h > create mode 100644 target/avr/Makefile.objs > create mode 100644 target/avr/cpu-param.h > create mode 100644 target/avr/cpu-qom.h > create mode 100644 target/avr/cpu.c > create mode 100644 target/avr/cpu.h > create mode 100644 target/avr/gdbstub.c > create mode 100644 target/avr/helper.c > create mode 100644 target/avr/helper.h > create mode 100644 target/avr/insn.decode > create mode 100644 target/avr/machine.c > create mode 100644 target/avr/translate.c > create mode 100644 tests/acceptance/machine_avr6.py > > -- > 2.17.2 (Apple Git-113) >
-- Best Regards, Michael Rolnik
