Lets add some documentation for the Protected VM functionality. Signed-off-by: Janosch Frank <fran...@linux.ibm.com> --- docs/system/index.rst | 1 + docs/system/protvirt.rst | 57 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 58 insertions(+) create mode 100644 docs/system/protvirt.rst
diff --git a/docs/system/index.rst b/docs/system/index.rst index 1a4b2c82ac..d2dc63b973 100644 --- a/docs/system/index.rst +++ b/docs/system/index.rst @@ -16,3 +16,4 @@ Contents: qemu-block-drivers vfio-ap + protvirt diff --git a/docs/system/protvirt.rst b/docs/system/protvirt.rst new file mode 100644 index 0000000000..a1902cc47c --- /dev/null +++ b/docs/system/protvirt.rst @@ -0,0 +1,57 @@ +Protected Virtualization on s390x +================================= + +The memory and most of the register contents of Protected Virtual +Machines (PVMs) are inaccessible to the hypervisor, effectively +prohibiting VM introspection when the VM is running. At rest, PVMs are +encrypted and can only be decrypted by the firmware of specific IBM Z +machines. + + +Prerequisites +------------- + +To run PVMs, you need to have a machine with the Protected +Virtualization feature, which is indicated by the Ultravisor Call +facility (stfle bit 158). This is a KVM only feature, therefore you +need a KVM which is able to support PVMs and activate the Ultravisor +initialization by setting `prot_virt=1` on the kernel command line. + +If those requirements are met, the capability `KVM_CAP_S390_PROTECTED` +will indicate that KVM can support PVMs on that LPAR. + + +QEMU Settings +------------- + +To indicate to the VM that it can move into protected mode, the +`Unpack facility` (stfle bit 161) needs to be part of the cpu model of +the VM. + +All I/O devices need to use the IOMMU. +Passthrough (vfio) devices are currently not supported. + +Host huge page backings are not supported. The guest however can use +huge pages as indicated by its facilities. + + +Boot Process +------------ + +A secure guest image can be both booted from disk and using the QEMU +command line. Booting from disk is done by the unmodified s390-ccw +BIOS. I.e., the bootmap is interpreted and a number of components is +read into memory and control is transferred to one of the components +(zipl stage3), which does some fixups and then transfers control to +some program residing in guest memory, which is normally the OS +kernel. The secure image has another component prepended (stage3a) +which uses the new diag308 subcodes 8 and 10 to trigger the transition +into secure mode. + +Booting from the command line requires that the file passed +via -kernel has the same memory layout as would result from the disk +boot. This memory layout includes the encrypted components (kernel, +initrd, cmdline), the stage3a loader and metadata. In case this boot +method is used, the command line options -initrd and -cmdline are +ineffective. The preparation of secure guest image is done by a +program (name tbd) of the s390-tools package. -- 2.20.1