On Fri, Apr 17, 2020 at 11:51 AM Michael S. Tsirkin <m...@redhat.com> wrote:
>
> On Wed, Apr 15, 2020 at 10:20:33PM +0200, Julia Suvorova wrote:
> > On Mon, Apr 13, 2020 at 12:55 PM Michael S. Tsirkin <m...@redhat.com> wrote:
> > >
> > > On Wed, Apr 08, 2020 at 12:51:20PM +0200, Igor Mammedov wrote:
> > > > On Tue, 7 Apr 2020 16:50:17 +0200
> > > > Julia Suvorova <jus...@redhat.com> wrote:
> > > >
> > > > > Raise an error when trying to hot-plug/unplug a device through QMP to
> > > > > a device
> > > > > with disabled hot-plug capability. This makes the device behaviour
> > > > > more
> > > > > consistent and provides an explanation of the failure in the case of
> > > > > asynchronous unplug.
> > > >
> > > > it applies to hotplug in general (i.e. not only QMP)
> > > >
> > > > >
> > > > > Signed-off-by: Julia Suvorova <jus...@redhat.com>
> > > > > ---
> > > > > hw/pci/pcie.c | 24 +++++++++++++++++++++---
> > > > > 1 file changed, 21 insertions(+), 3 deletions(-)
> > > > >
> > > > > diff --git a/hw/pci/pcie.c b/hw/pci/pcie.c
> > > > > index 0eb3a2a5d2..e9798caa8a 100644
> > > > > --- a/hw/pci/pcie.c
> > > > > +++ b/hw/pci/pcie.c
> > > > > @@ -415,6 +415,7 @@ void pcie_cap_slot_plug_cb(HotplugHandler
> > > > > *hotplug_dev, DeviceState *dev,
> > > > > {
> > > > > PCIDevice *hotplug_pdev = PCI_DEVICE(hotplug_dev);
> > > > > uint8_t *exp_cap = hotplug_pdev->config +
> > > > > hotplug_pdev->exp.exp_cap;
> > > > > + uint32_t sltcap = pci_get_word(exp_cap + PCI_EXP_SLTCAP);
> > > > > PCIDevice *pci_dev = PCI_DEVICE(dev);
> > > > >
> > > > > /* Don't send event when device is enabled during qemu machine
> > > > > creation:
> > > > > @@ -430,6 +431,13 @@ void pcie_cap_slot_plug_cb(HotplugHandler
> > > > > *hotplug_dev, DeviceState *dev,
> > > > > return;
> > > > > }
> > > > >
> > > > > + /* Hot-plug is disabled on the slot */
> > > > > + if ((sltcap & PCI_EXP_SLTCAP_HPC) == 0) {
> > > > > + error_setg(errp, "Device '%s' does not support hot-plug",
> > > > > + DEVICE(hotplug_dev)->id);
> > > > plug and unplug_req are synchronous. so one can skip on "Device '%s'",
> > > > user will get this error message as response to device_add/del command.
> > > >
> > > > and more exactly it's concrete slot that does not support hotplug, how
> > > > about
> > > > "slot doesn't support ..." or just "hotlpug is not supported"
> > >
> > > Well device name is useful here, while these commands are synchronous
> > > others aren't so log parsing might not be synchronous.
> > >
> > > I do think we should mention slot since that's the reason
> > > hotplug failed:
> > > "Device '%s' hot-plug failed: unsupported by slot"
> > >
> > > > > + return;
> > > > > + }
> > > > > +
> > > > > /* To enable multifunction hot-plug, we just ensure the function
> > > > > * 0 added last. When function 0 is added, we set the sltsta and
> > > > > * inform OS via event notification.
> > > > > @@ -464,14 +472,24 @@ static void pcie_unplug_device(PCIBus *bus,
> > > > > PCIDevice *dev, void *opaque)
> > > > > object_unparent(OBJECT(dev));
> > > > > }
> > > > >
> > > > > -void pcie_cap_slot_unplug_request_cb(HotplugHandler *hotplug_dev,
> > > > > +void pcie_cap_slot_unplug_request_cb(HotplugHandler *hotplug_handler,
> > > > > DeviceState *dev, Error **errp)
> > > > > {
> > > > > Error *local_err = NULL;
> > > > > PCIDevice *pci_dev = PCI_DEVICE(dev);
> > > > > PCIBus *bus = pci_get_bus(pci_dev);
> > > > > + PCIDevice *hotplug_dev = PCI_DEVICE(hotplug_handler);
> > > > > + uint8_t *exp_cap = hotplug_dev->config +
> > > > > hotplug_dev->exp.exp_cap;
> > > > > + uint32_t sltcap = pci_get_word(exp_cap + PCI_EXP_SLTCAP);
> > > > > +
> > > > > + /* Hot-unplug is disabled on the slot */
> > > > > + if ((sltcap & PCI_EXP_SLTCAP_HPC) == 0) {
> > > > > + error_setg(errp, "Device '%s' does not support hot-unplug",
> > > > > + DEVICE(hotplug_dev)->id);
> > > > > + return;
> > >
> > > Here too let's mention slot since that's the reason
> > > hotplug failed:
> > > "Device '%s' hot-unplug failed: unsupported by slot"
> > >
> > > ?
> >
> > Just to mention, for a user it's disabled on the device,
>
> How?
> I assumed this is what is used:
>
> commit 530a0963184e57e71a5b538e9161f115df533e96
> Author: Julia Suvorova <jus...@redhat.com>
> Date: Wed Feb 26 18:46:07 2020 +0100
>
> pcie_root_port: Add hotplug disabling option
>
> Make hot-plug/hot-unplug on PCIe Root Ports optional to allow libvirt
> manage it and restrict unplug for the whole machine. This is going to
> prevent user-initiated unplug in guests (Windows mostly).
> Hotplug is enabled by default.
> Usage:
> -device pcie-root-port,hotplug=off,...
>
>
> so it looks like user has to disable it on the slot.
By device I mean root port, and it's shown in the error message. If
you think it's not correct, I'll change it.
