Since I'm sure everyone is just sitting around waiting for 5.0 to release ;) I thought I would submit v3 of my dwc-hsotg series. I think I have taken everyone's requests/comments into account, except for Peter's request to use the macros from registerfields.h to access the registers. I think that would be more work than I'm willing to put in at the moment.
This patch series adds emulation for the dwc-hsotg USB controller, which is used on the Raspberry Pi 3 and earlier, as well as a number of other development boards. The main benefit for Raspberry Pi is that this enables networking on these boards, since the network adapter is attached via USB. The emulation is working quite well, I have tested with USB network, mass storage, mouse, keyboard, and tablet. I have tested with the dwc2 driver in the upstream Linux kernel, and with the dwc-otg driver in the Raspbian kernel. One remaining issue is that USB host passthrough does not work. I tried connecting to a USB stick on the host, but the device generates babble errors and does not work. This is because the dwc-hsotg controller only has one root port, so a full-speed dev-hub device is always connected to it, and high-speed USB devices on the host do not work at full-speed on the guest. (I have WIP code to add high-speed support to dev-hub to fix this.) The patch series also includes a very basic emulation of the MPHI device on the Raspberry Pi SOC, which provides the FIQ interrupt that is used by the dwc-otg driver in the Raspbian kernel. But that driver still does not work in full FIQ mode, so it is necessary to add a parameter to the kernel command line ("dwc_otg.fiq_fsm_enable=0") to make it work. I have used some online sources of information while developing this emulation, including: http://www.capital-micro.com/PDF/CME-M7_Family_User_Guide_EN.pdf which has a pretty complete description of the controller starting on page 370. https://sourceforge.net/p/wive-ng/wive-ng-mt/ci/master/tree/docs/DataSheets/RT3050_5x_V2.0_081408_0902.pdf which has a description of the controller registers starting on page 130. Changes v2-v3: - Fixed the high-speed frame time emulation so that high-speed mouse/tablet will work correctly once we have high-speed hub support. - Added a "usb_version" property to the dwc-hsotg controller, to allow choosing whether the controller emulates a USB 1 full-speed host or a USB 2 high-speed host. - Added a test for a working dwc-hsotg controller to the raspi2 acceptance test, requested by Philippe M. - Added #defines for the register array sizes, instead of hard- coding them in multiple places. - Removed the NB_PORTS #define and the associated iteration code, since the controller only supports a single root port. - Removed some unused fields from the controller state struct. - Added pointers to some online documentation to the top of hcd-dwc2.c, requested by Peter M. - Reworked the init/realize code to remove some confusing function names, requested by Peter M. - Added VMStateDescription structs for the controller and MPHI state, requested by Peter M (untested). Changes v1-v2: - Fixed checkpatch errors/warnings, except for dwc2-regs.h since that is a direct import from the Linux kernel. - Switched from debug printfs to tracepoints in hcd-dwc2.c, on the advice of Gerd. I just dropped the debug prints in bcm2835_mphi.c, since I didn't consider them very useful. - Updated a couple of the commit messages with more info. Thanks for your time, Paul --- Paul Zimmerman (7): raspi: add BCM2835 SOC MPHI emulation dwc-hsotg (dwc2) USB host controller register definitions dwc-hsotg (dwc2) USB host controller state definitions dwc-hsotg (dwc2) USB host controller emulation usb: add short-packet handling to usb-storage driver wire in the dwc-hsotg (dwc2) USB host controller emulation raspi2 acceptance test: add check for functional dwc-hsotg (dwc2) USB host hw/arm/bcm2835_peripherals.c | 38 +- hw/misc/Makefile.objs | 1 + hw/misc/bcm2835_mphi.c | 190 ++++ hw/usb/Kconfig | 5 + hw/usb/Makefile.objs | 1 + hw/usb/dev-storage.c | 15 +- hw/usb/hcd-dwc2.c | 1372 ++++++++++++++++++++++++ hw/usb/hcd-dwc2.h | 184 ++++ hw/usb/trace-events | 47 + include/hw/arm/bcm2835_peripherals.h | 5 +- include/hw/misc/bcm2835_mphi.h | 48 + include/hw/usb/dwc2-regs.h | 895 ++++++++++++++++ tests/acceptance/boot_linux_console.py | 9 +- 13 files changed, 2805 insertions(+), 5 deletions(-) create mode 100644 hw/misc/bcm2835_mphi.c create mode 100644 hw/usb/hcd-dwc2.c create mode 100644 hw/usb/hcd-dwc2.h create mode 100644 include/hw/misc/bcm2835_mphi.h create mode 100644 include/hw/usb/dwc2-regs.h -- 2.17.1