From: Klaus Jensen <k.jen...@samsung.com> This adds mandatory features of NVM Express v1.3 to the emulated NVMe device.
v3: * hw/block/nvme: additional tracing - Reverse logic in nvme_cid(). (Philippe) - Move nvme_cid() and nvme_sqid() to source file. (Philippe) * hw/block/nvme: fix missing endian conversion - Move this patch to very early in the series and fix the bug properly as suggested by Philippe. Then let the change trickle down through the series. (Philippe) * hw/block/nvme: add remaining mandatory controller parameters - Move the nvme_feature_{support,default} arrays to the source file. (Philippe) - Add a NVME_FID_MAX constant. (Philippe) * hw/block/nvme: support the get/set features select and save fields - Move the nvme_feature_cap array to the source file. (Philippe) * hw/block/nvme: reject invalid nsid values in active namespace id list - Rework the condition and add a comment and reference to the spec. (Philippe) * hw/block/nvme: provide the mandatory subnqn field - Change to use strpadcpy(). (Philippe) Had to clear some R-b's due to functional changes. Missing review: 2, 3, 7, 12, 16, 17 v2: * hw/block/nvme: bump spec data structures to v1.3 - Shorten some constants. (Dmitry) * hw/block/nvme: add temperature threshold feature - Remove unused temp_thresh member. (Dmitry) * hw/block/nvme: add support for the get log page command - Change the temperature field in the NvmeSmartLog struct to be an uint16_t and handle wierd alignment by adding QEMU_PACKED to the struct. (Dmitry) * hw/block/nvme: add remaining mandatory controller parameters - Fix spelling. (Dmitry) * hw/block/nvme: support the get/set features select and save fields - Fix bad logic causing temperature thresholds to always report defaults. (Dmitry) * hw/block/nvme: reject invalid nsid values in active namespace id list - Added patch; reject the 0xfffffffe and 0xffffffff nsid values. $ git-backport-diff -u for-master/bump-to-v1.3-v2 -r upstream/master... -S Key: [----] : patches are identical [####] : number of functional differences between upstream/downstream patch [down] : patch is downstream-only The flags [FC] indicate (F)unctional and (C)ontextual differences, respectively 001/18:[----] [--] 'hw/block/nvme: bump spec data structures to v1.3' 002/18:[0008] [FC] 'hw/block/nvme: fix missing endian conversion' 003/18:[0028] [FC] 'hw/block/nvme: additional tracing' 004/18:[----] [--] 'hw/block/nvme: add support for the abort command' 005/18:[0004] [FC] 'hw/block/nvme: add temperature threshold feature' 006/18:[----] [--] 'hw/block/nvme: mark fw slot 1 as read-only' 007/18:[----] [--] 'hw/block/nvme: add support for the get log page command' 008/18:[0002] [FC] 'hw/block/nvme: add support for the asynchronous event request command' 009/18:[----] [--] 'hw/block/nvme: move NvmeFeatureVal into hw/block/nvme.h' 010/18:[----] [--] 'hw/block/nvme: flush write cache when disabled' 011/18:[0044] [FC] 'hw/block/nvme: add remaining mandatory controller parameters' 012/18:[0024] [FC] 'hw/block/nvme: support the get/set features select and save fields' 013/18:[----] [--] 'hw/block/nvme: make sure ncqr and nsqr is valid' 014/18:[----] [--] 'hw/block/nvme: support identify namespace descriptor list' 015/18:[0008] [FC] 'hw/block/nvme: reject invalid nsid values in active namespace id list' 016/18:[----] [--] 'hw/block/nvme: enforce valid queue creation sequence' 017/18:[0006] [FC] 'hw/block/nvme: provide the mandatory subnqn field' 018/18:[----] [--] 'hw/block/nvme: bump supported version to v1.3' Klaus Jensen (18): hw/block/nvme: bump spec data structures to v1.3 hw/block/nvme: fix missing endian conversion hw/block/nvme: additional tracing hw/block/nvme: add support for the abort command hw/block/nvme: add temperature threshold feature hw/block/nvme: mark fw slot 1 as read-only hw/block/nvme: add support for the get log page command hw/block/nvme: add support for the asynchronous event request command hw/block/nvme: move NvmeFeatureVal into hw/block/nvme.h hw/block/nvme: flush write cache when disabled hw/block/nvme: add remaining mandatory controller parameters hw/block/nvme: support the get/set features select and save fields hw/block/nvme: make sure ncqr and nsqr is valid hw/block/nvme: support identify namespace descriptor list hw/block/nvme: reject invalid nsid values in active namespace id list hw/block/nvme: enforce valid queue creation sequence hw/block/nvme: provide the mandatory subnqn field hw/block/nvme: bump supported version to v1.3 block/nvme.c | 18 +- hw/block/nvme.c | 676 ++++++++++++++++++++++++++++++++++++++++-- hw/block/nvme.h | 22 +- hw/block/trace-events | 27 +- include/block/nvme.h | 225 +++++++++++--- 5 files changed, 892 insertions(+), 76 deletions(-) -- 2.27.0