Hello, This series includes various fixes improving the support of Aspeed machines. Extra attention was given to the robustness of the ftgmac100 model. A small kernel module tester was created for this purpose :
https://github.com/legoater/ftgmac100-test/ Changes in v2 : - definitions for some new flash models in m25p80 by Igor - All Joel's comments should have been addressed - A better fix of the integer overflow in ftgmac100_do_tx suggested by Peter. This needs a couple more reviewed-by before I can send a PR. Thanks, C. Cédric Le Goater (16): m25p80: Return the JEDEC ID twice for mx25l25635e m25p80: Add support for mx25l25635f m25p80: Add support for n25q512ax3 aspeed/scu: Fix valid access size on AST2400 aspeed/smc: Fix MemoryRegionOps definition aspeed/smc: Fix max_slaves of the legacy SMC device aspeed/sdhci: Fix reset sequence ftgmac100: Fix registers that can be read ftgmac100: Fix interrupt status "Packet transmitted on ethernet" ftgmac100: Fix interrupt status "Packet moved to RX FIFO" ftgmac100: Change interrupt status when a DMA error occurs ftgmac100: Check for invalid len and address before doing a DMA transfer ftgmac100: Fix integer overflow in ftgmac100_do_tx() ftgmac100: Improve software reset aspeed/sdmc: Simplify calculation of RAM bits aspeed/smc: Open AHB window of the second chip of the AST2600 FMC controller Igor Kononenko (2): arm: aspeed: add strap define `25HZ` of AST2500 hw: add a number of SPI-flash's of m25p80 family Joel Stanley (2): aspeed/sdmc: Perform memory training aspeed/sdmc: Allow writes to unprotected registers erik-smit (1): hw/arm/aspeed: Add board model for Supermicro X11 BMC include/hw/misc/aspeed_scu.h | 1 + include/hw/misc/aspeed_sdmc.h | 13 +++- hw/arm/aspeed.c | 35 ++++++++++ hw/block/m25p80.c | 6 +- hw/misc/aspeed_scu.c | 9 +-- hw/misc/aspeed_sdmc.c | 125 +++++++++++++++++++--------------- hw/net/ftgmac100.c | 95 ++++++++++++++++++-------- hw/sd/aspeed_sdhci.c | 14 +++- hw/ssi/aspeed_smc.c | 6 +- 9 files changed, 209 insertions(+), 95 deletions(-) -- 2.25.4
