** Description changed: There exists a bug with Chelsio NICs T4 that causes the following error: kvm: -device vfio- pci,host=0000:83:00.7,id=hostpci1.7,bus=pci.0,addr=0x11.7: vfio 0000:83:00.7: hardware reports invalid configuration, MSIX PBA outside of specified BAR - I was working with a downstream Proxmox developer to try to fix this - issue, and they provided me with the following change to make from line - 1484 of hw/vfio/pci.c: + I discovered this bug on a Proxmox system, and I was working with a + downstream Proxmox developer to try to fix this issue. They provided me + with the following change to make from line 1484 of hw/vfio/pci.c: static void vfio_msix_early_setup(VFIOPCIDevice *vdev, Error **errp) - * is 0x1000, so we hard code that here. - */ - if (vdev->vendor_id == PCI_VENDOR_ID_CHELSIO && + * is 0x1000, so we hard code that here. + */ + if (vdev->vendor_id == PCI_VENDOR_ID_CHELSIO && - (vdev->device_id & 0xff00) == 0x5800) { + ((vdev->device_id & 0xff00) == 0x5800 || + (vdev->device_id & 0xff00) == 0x1425)) { - msix->pba_offset = 0x1000; - } else if (vdev->msix_relo == OFF_AUTOPCIBAR_OFF) { - error_setg(errp, "hardware reports invalid configuration, " + msix->pba_offset = 0x1000; + } else if (vdev->msix_relo == OFF_AUTOPCIBAR_OFF) { + error_setg(errp, "hardware reports invalid configuration, " However, I found that this did not fix the issue, so the bug appears to work differently than the one that was present on the T5 NICs which has already been patched. I have attached the output of my lspci -nnkvv
-- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1894869 Title: Chelsio T4 has old MSIX PBA offset bug Status in QEMU: New Bug description: There exists a bug with Chelsio NICs T4 that causes the following error: kvm: -device vfio- pci,host=0000:83:00.7,id=hostpci1.7,bus=pci.0,addr=0x11.7: vfio 0000:83:00.7: hardware reports invalid configuration, MSIX PBA outside of specified BAR I discovered this bug on a Proxmox system, and I was working with a downstream Proxmox developer to try to fix this issue. They provided me with the following change to make from line 1484 of hw/vfio/pci.c: static void vfio_msix_early_setup(VFIOPCIDevice *vdev, Error **errp) * is 0x1000, so we hard code that here. */ if (vdev->vendor_id == PCI_VENDOR_ID_CHELSIO && - (vdev->device_id & 0xff00) == 0x5800) { + ((vdev->device_id & 0xff00) == 0x5800 || + (vdev->device_id & 0xff00) == 0x1425)) { msix->pba_offset = 0x1000; } else if (vdev->msix_relo == OFF_AUTOPCIBAR_OFF) { error_setg(errp, "hardware reports invalid configuration, " However, I found that this did not fix the issue, so the bug appears to work differently than the one that was present on the T5 NICs which has already been patched. I have attached the output of my lspci -nnkvv To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1894869/+subscriptions