Cold plugged bridges are not hot unpluggable, even when their hotplug
property (acpi-pci-hotplug-with-bridge-support) is turned off. Please see
the function acpi_pcihp_pc_no_hotplug(). However, with
the current implementaton, Windows would try to hot-unplug a pci bridge when
it's hotplug switch is off. This is regardless of whether there are devices
attached to the bridge since we add ACPI code like _EJ0 etc for the
pci slot where the bridge is cold plugged.
In this fix, we identify a cold plugged bridge and for cold plugged bridges,
we do not add the appropriate acpi methods that are used by the OS
to identify a hot-pluggable/unpluggable pci device. After this change, Windows
does not detect the cold plugged pci bridge as ejectable.
As a result of the patch, the following are the changes to the DSDT ACPI
table:
@@ -858,38 +858,33 @@
Return (Zero)
}
Method (_S2D, 0, NotSerialized) // _S2D: S2 Device State
{
Return (Zero)
}
Method (_S3D, 0, NotSerialized) // _S3D: S3 Device State
{
Return (Zero)
}
}
Device (S18)
{
- Name (_SUN, 0x03) // _SUN: Slot User Number
Name (_ADR, 0x00030000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
}
Device (S20)
{
Name (_SUN, 0x04) // _SUN: Slot User Number
Name (_ADR, 0x00040000) // _ADR: Address
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
PCEJ (BSEL, _SUN)
}
}
Device (S28)
{
Name (_SUN, 0x05) // _SUN: Slot User Number
Name (_ADR, 0x00050000) // _ADR: Address
@@ -1148,37 +1143,32 @@
PCEJ (BSEL, _SUN)
}
}
Device (SF8)
{
Name (_SUN, 0x1F) // _SUN: Slot User Number
Name (_ADR, 0x001F0000) // _ADR: Address
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
PCEJ (BSEL, _SUN)
}
}
Method (DVNT, 2, NotSerialized)
{
- If ((Arg0 & 0x08))
- {
- Notify (S18, Arg1)
- }
-
If ((Arg0 & 0x10))
{
Notify (S20, Arg1)
}
If ((Arg0 & 0x20))
{
Notify (S28, Arg1)
}
If ((Arg0 & 0x40))
{
Notify (S30, Arg1)
}
If ((Arg0 & 0x80))
While at it, I have also updated a stale comment.
Signed-off-by: Ani Sinha <[email protected]>
Suggested-by: Julia Suvorova <[email protected]>
Reviewed-by: Julia Suvorova <[email protected]>
Reviewed-by: Igor Mammedov <[email protected]>
---
hw/i386/acpi-build.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 7a5a8b3521..e079b686f5 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -359,6 +359,7 @@ static void build_append_pci_bus_devices(Aml *parent_scope,
PCIBus *bus,
int slot = PCI_SLOT(i);
bool hotplug_enabled_dev;
bool bridge_in_acpi;
+ bool cold_plugged_bridge;
if (!pdev) {
if (bsel) { /* add hotplug slots for non present devices */
@@ -380,15 +381,14 @@ static void build_append_pci_bus_devices(Aml
*parent_scope, PCIBus *bus,
pc = PCI_DEVICE_GET_CLASS(pdev);
dc = DEVICE_GET_CLASS(pdev);
- /* When hotplug for bridges is enabled, bridges are
- * described in ACPI separately (see build_pci_bus_end).
- * In this case they aren't themselves hot-pluggable.
+ /*
+ * Cold plugged bridges aren't themselves hot-pluggable.
* Hotplugged bridges *are* hot-pluggable.
*/
- bridge_in_acpi = pc->is_bridge && pcihp_bridge_en &&
- !DEVICE(pdev)->hotplugged;
+ cold_plugged_bridge = pc->is_bridge && !DEVICE(pdev)->hotplugged;
+ bridge_in_acpi = cold_plugged_bridge && pcihp_bridge_en;
- hotplug_enabled_dev = bsel && dc->hotpluggable && !bridge_in_acpi;
+ hotplug_enabled_dev = bsel && dc->hotpluggable && !cold_plugged_bridge;
if (pc->class_id == PCI_CLASS_BRIDGE_ISA) {
continue;
--
2.17.1
