Peter Maydell <peter.mayd...@linaro.org> writes:
> On Sun, 4 Oct 2020 at 18:44, Alex Bennée <alex.ben...@linaro.org> wrote: >> Thomas <74cmo...@gmail.com> writes: >> > I'm trying to emulate Rpi with QEMU. >> > I found >> > [url=1]this[/url] >> > arcticle in Raspberry Pi Geek documenting the steps including persistent >> > storage on host. >> > >> > However when starting the emulation with command >> > qemu-system-arm -M versatilepb -cpu arm1176 -m 256 -serial stdio -hda >> > 2020-08-20-raspios-buster-armhf-lite.img -net >> > "user,hostfwd=tcp::5022-:22" -dtb versatile-pb-buster.dtb -kernel >> > kernel-qemu-5.4.51-buster -append "root=/dev/sda2 rootfstype=ext4 rw >> > panic=1" -no-reboot >> >> Let's start with the fact you are using a versatilepb machine type with >> a versatilepb dtb and not the rasppi model. > > Given the name of the kernel image, this probably actually *is* > built for versatilepb, or it wouldn't have got as far as failing > to mount the root partition. There seems to be a lot of confusion > in the raspberry pi community about the difference between > running the raspi userspace plus a for-versatilepb kernel > versus running a full raspi setup. Ahh your German is considerably better than mine ;-) Looking more closely at the blog it seems to be predicated on extracting a Raspbian kernel which at least stands a fighting chance of being a multi_config kernel - like the buster above. I can see why these sorts of shenanigans used to be pulled when there where no RaspPi models although if all you want to do is run an ARM user space what's wrong with using linux-user for this sort of thing? > Anyway, failing to mount the rootfs and not listing any > sda devices is not a problem with the fstab, because the system > hasn't got as far as being able to mount the filesystem with a > fstab on it yet. One possibility is that the kernel is > missing the device drivers for either PCI or for the SCSI > controller that gets plugged in to versatilepb by default. > > My guess at the cause is that you're trying to boot a Linux 5.something > kernel and you've run into the issue described in this thread: > https://lists.gnu.org/archive/html/qemu-discuss/2020-09/msg00023.html > where the Linux 5.x sym53c8xx scsi driver is not compatible with QEMU's > emulation of that device. If that's the case then you should see > earlier in the kernel boot log error messages similar to the ones > that Roger reported. The fix would be either to use an older > kernel, or to change the QEMU commandline to use a different > SCSI controller (or to use a virtio block device). Do we have any documentation for the RaspPi models? The acceptance tests look like they support the inbuilt MMC/SD controller device: kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + serial_kernel_cmdline[uart_id] + ' root=/dev/mmcblk0p2 rootwait ' + 'dwc_otg.fiq_fsm_enable=0') It would be useful to fill the hole in the documentation so gently steer people away from these hybrid franken-machine approaches. > > thanks > -- PMM -- Alex Bennée
