On Thu, Oct 1, 2020 at 10:56 PM Cédric Le Goater <c...@kaod.org> wrote:
>
> On 9/29/20 7:53 AM, John Wang wrote:
> > G220A is a 2 socket x86 motherboard supported by OpenBMC.
> > Strapping configuration was obtained from hardware.
> >
> > Signed-off-by: John Wang <wangzhiqiang...@bytedance.com>
>
> Reviewed-by: Cédric Le Goater <c...@kaod.org>
>
>
> One quick question below.
>
> > ---
> >  hw/arm/aspeed.c | 60 +++++++++++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 60 insertions(+)
> >
> > diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
> > index bdb981d2f8..04c8ad2bcd 100644
> > --- a/hw/arm/aspeed.c
> > +++ b/hw/arm/aspeed.c
> > @@ -120,6 +120,20 @@ struct AspeedMachineState {
> >          SCU_AST2500_HW_STRAP_ACPI_ENABLE |                              \
> >          SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
> >
> > +#define G220A_BMC_HW_STRAP1 (                                      \
> > +        SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE |                     \
> > +        SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE |                        \
> > +        SCU_AST2500_HW_STRAP_UART_DEBUG |                               \
> > +        SCU_AST2500_HW_STRAP_RESERVED28 |                               \
> > +        SCU_AST2500_HW_STRAP_DDR4_ENABLE |                              \
> > +        SCU_HW_STRAP_2ND_BOOT_WDT |                                     \
> > +        SCU_HW_STRAP_VGA_CLASS_CODE |                                   \
> > +        SCU_HW_STRAP_LPC_RESET_PIN |                                    \
> > +        SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) |                \
> > +        SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) |     \
> > +        SCU_HW_STRAP_VGA_SIZE_SET(VGA_64M_DRAM) |                       \
> > +        SCU_AST2500_HW_STRAP_RESERVED1)
> > +
> >  /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */
> >  #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1
> >
> > @@ -559,6 +573,30 @@ static void 
> > witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
> >      /* Bus 11: TODO ucd90160@64 */
> >  }
> >
> > +static void g220a_bmc_i2c_init(AspeedMachineState *bmc)
> > +{
> > +    AspeedSoCState *soc = &bmc->soc;
> > +    DeviceState *dev;
> > +
> > +    dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3),
> > +                                         "emc1413", 0x4c));
> > +    object_property_set_int(OBJECT(dev), "temperature0", 31000, 
> > &error_abort);
> > +    object_property_set_int(OBJECT(dev), "temperature1", 28000, 
> > &error_abort);
> > +    object_property_set_int(OBJECT(dev), "temperature2", 20000, 
> > &error_abort);
> > +
> > +    dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 12),
> > +                                         "emc1413", 0x4c));
> > +    object_property_set_int(OBJECT(dev), "temperature0", 31000, 
> > &error_abort);
> > +    object_property_set_int(OBJECT(dev), "temperature1", 28000, 
> > &error_abort);
> > +    object_property_set_int(OBJECT(dev), "temperature2", 20000, 
> > &error_abort);
> > +
> > +    dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 13),
> > +                                         "emc1413", 0x4c));
> > +    object_property_set_int(OBJECT(dev), "temperature0", 31000, 
> > &error_abort);
> > +    object_property_set_int(OBJECT(dev), "temperature1", 28000, 
> > &error_abort);
> > +    object_property_set_int(OBJECT(dev), "temperature2", 20000, 
> > &error_abort);
> > +}
> > +
> >  static bool aspeed_get_mmio_exec(Object *obj, Error **errp)
> >  {
> >      return ASPEED_MACHINE(obj)->mmio_exec;
> > @@ -798,6 +836,24 @@ static void 
> > aspeed_machine_tacoma_class_init(ObjectClass *oc, void *data)
> >          aspeed_soc_num_cpus(amc->soc_name);
> >  };
> >
> > +static void aspeed_machine_g220a_class_init(ObjectClass *oc, void *data)
> > +{
> > +    MachineClass *mc = MACHINE_CLASS(oc);
> > +    AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
> > +
> > +    mc->desc       = "Bytedance G220A BMC (ARM1176)";
> > +    amc->soc_name  = "ast2500-a1";
> > +    amc->hw_strap1 = G220A_BMC_HW_STRAP1;
> > +    amc->fmc_model = "n25q512a";
> > +    amc->spi_model = "mx25l25635e";
>
> On real HW, is it a mx25l25635e or a mx25l25635f ?

I'm not sure, maybe mx25l25635f , at the lab, we have multiple models
of flash chips. :)

>
> Thanks
>
> C.
>
> > +    amc->num_cs    = 2;
> > +    amc->macs_mask  = ASPEED_MAC1_ON | ASPEED_MAC2_ON;
> > +    amc->i2c_init  = g220a_bmc_i2c_init;
> > +    mc->default_ram_size = 1024 * MiB;
> > +    mc->default_cpus = mc->min_cpus = mc->max_cpus =
> > +        aspeed_soc_num_cpus(amc->soc_name);
> > +};
> > +
> >  static const TypeInfo aspeed_machine_types[] = {
> >      {
> >          .name          = MACHINE_TYPE_NAME("palmetto-bmc"),
> > @@ -835,6 +891,10 @@ static const TypeInfo aspeed_machine_types[] = {
> >          .name          = MACHINE_TYPE_NAME("tacoma-bmc"),
> >          .parent        = TYPE_ASPEED_MACHINE,
> >          .class_init    = aspeed_machine_tacoma_class_init,
> > +    }, {
> > +        .name          = MACHINE_TYPE_NAME("g220a-bmc"),
> > +        .parent        = TYPE_ASPEED_MACHINE,
> > +        .class_init    = aspeed_machine_g220a_class_init,
> >      }, {
> >          .name          = TYPE_ASPEED_MACHINE,
> >          .parent        = TYPE_MACHINE,
> >
>

Reply via email to