On Thu, Dec 17, 2020 at 1:28 PM Bin Meng <bmeng...@gmail.com> wrote:
>
> From: Bin Meng <bin.m...@windriver.com>
>
> For the ECSPIx_CONREG register BURST_LENGTH field, the manual says:
>
> 0x020 A SPI burst contains the 1 LSB in first word and all 32 bits in second
> word.
> 0x021 A SPI burst contains the 2 LSB in first word and all 32 bits in second
> word.
>
> Current logic uses either s->burst_length or 32, whichever smaller,
> to determine how many bits it should read from the tx fifo each time.
> For example, for a 48 bit burst length, current logic transfers the
> first 32 bit from the first word in the tx fifo, followed by a 16
> bit from the second word in the tx fifo, which is wrong. The correct
> logic should be: transfer the first 16 bit from the first word in
> the tx fifo, followed by a 32 bit from the second word in the tx fifo.
>
> With this change, SPI flash can be successfully probed by U-Boot on
> imx6 sabrelite board.
>
> => sf probe
> SF: Detected sst25vf016b with page size 256 Bytes, erase size 4 KiB, total
> 2 MiB
>
> Fixes: c906a3a01582 ("i.MX: Add the Freescale SPI Controller")
> Signed-off-by: Bin Meng <bin.m...@windriver.com>
> ---
>
> hw/ssi/imx_spi.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
Ping?
