From: Guenter Roeck <li...@roeck-us.net>

The IDE legacy mode emulation has been removed in commit 4ea98d317eb
("ide/via: Implement and use native PCI IDE mode") but some Linux
kernels (probably including def_config) require legacy mode on the
Fuloong2e so only emulating native mode did not turn out feasible.
Add property to via-ide model to make the mode configurable, and set
legacy mode for Fuloong2e.

Signed-off-by: Guenter Roeck <li...@roeck-us.net>
[balaton: Use bit in flags for property, add comment for missing BAR4]
Signed-off-by: BALATON Zoltan <bala...@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4...@amsat.org>
Tested-by: Guenter Roeck <li...@roeck-us.net>
---
v2: Reworded commit message

 hw/ide/via.c        | 19 +++++++++++++++++--
 hw/mips/fuloong2e.c |  4 +++-
 2 files changed, 20 insertions(+), 3 deletions(-)

diff --git a/hw/ide/via.c b/hw/ide/via.c
index be09912b33..7d54d7e829 100644
--- a/hw/ide/via.c
+++ b/hw/ide/via.c
@@ -26,6 +26,7 @@
 
 #include "qemu/osdep.h"
 #include "hw/pci/pci.h"
+#include "hw/qdev-properties.h"
 #include "migration/vmstate.h"
 #include "qemu/module.h"
 #include "sysemu/dma.h"
@@ -185,12 +186,19 @@ static void via_ide_realize(PCIDevice *dev, Error **errp)
                           &d->bus[1], "via-ide1-cmd", 4);
     pci_register_bar(dev, 3, PCI_BASE_ADDRESS_SPACE_IO, &d->cmd_bar[1]);
 
-    bmdma_setup_bar(d);
-    pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar);
+    if (!(d->flags & BIT(PCI_IDE_LEGACY_MODE))) {
+        /* Missing BAR4 will make Linux driver fall back to legacy PIO mode */
+        bmdma_setup_bar(d);
+        pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar);
+    }
 
     qdev_init_gpio_in(ds, via_ide_set_irq, 2);
     for (i = 0; i < 2; i++) {
         ide_bus_new(&d->bus[i], sizeof(d->bus[i]), ds, i, 2);
+        if (d->flags & BIT(PCI_IDE_LEGACY_MODE)) {
+            ide_init_ioport(&d->bus[i], NULL, i ? 0x170 : 0x1f0,
+                            i ? 0x376 : 0x3f6);
+        }
         ide_init2(&d->bus[i], qdev_get_gpio_in(ds, i));
 
         bmdma_init(&d->bus[i], &d->bmdma[i], d);
@@ -210,6 +218,12 @@ static void via_ide_exitfn(PCIDevice *dev)
     }
 }
 
+static Property via_ide_properties[] = {
+    DEFINE_PROP_BIT("legacy_mode", PCIIDEState, flags, PCI_IDE_LEGACY_MODE,
+                    false),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
 static void via_ide_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
@@ -223,6 +237,7 @@ static void via_ide_class_init(ObjectClass *klass, void 
*data)
     k->device_id = PCI_DEVICE_ID_VIA_IDE;
     k->revision = 0x06;
     k->class_id = PCI_CLASS_STORAGE_IDE;
+    device_class_set_props(dc, via_ide_properties);
     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
 }
 
diff --git a/hw/mips/fuloong2e.c b/hw/mips/fuloong2e.c
index 45c596f4fe..f0733e87b7 100644
--- a/hw/mips/fuloong2e.c
+++ b/hw/mips/fuloong2e.c
@@ -253,7 +253,9 @@ static void vt82c686b_southbridge_init(PCIBus *pci_bus, int 
slot, qemu_irq intc,
     /* Super I/O */
     isa_create_simple(isa_bus, TYPE_VT82C686B_SUPERIO);
 
-    dev = pci_create_simple(pci_bus, PCI_DEVFN(slot, 1), "via-ide");
+    dev = pci_new(PCI_DEVFN(slot, 1), "via-ide");
+    qdev_prop_set_bit(&dev->qdev, "legacy_mode", true);
+    pci_realize_and_unref(dev, pci_bus, &error_fatal);
     pci_ide_create_devs(dev);
 
     pci_create_simple(pci_bus, PCI_DEVFN(slot, 2), "vt82c686b-usb-uhci");
-- 
2.21.3


Reply via email to