From: Bin Meng <bin.m...@windriver.com> This adds the missing SPI support to the `sifive_u` machine in the QEMU mainline. With this series, upstream U-Boot for the SiFive HiFive Unleashed board can boot on QEMU `sifive_u` out of the box. This allows users to develop and test the recommended RISC-V boot flow with a real world use case: ZSBL (in QEMU) loads U-Boot SPL from SD card or SPI flash to L2LIM, then U-Boot SPL loads the payload from SD card or SPI flash that is a combination of OpenSBI fw_dynamic firmware and U-Boot proper.
The m25p80 model is updated to support ISSI flash series. A bunch of ssi-sd issues are fixed, and writing to SD card in SPI mode is supported. reST documentation for RISC-V is added. Currently only `sifive_u` machine is documented, but more to come. Bin Meng (22): hw/block: m25p80: Add ISSI SPI flash support hw/block: m25p80: Add various ISSI flash information hw/sd: ssi-sd: Fix incorrect card response sequence hw/sd: sd: Support CMD59 for SPI mode hw/sd: sd: Drop sd_crc16() util: Add CRC16 (CCITT) calculation routines hw/sd: ssi-sd: Suffix a data block with CRC16 hw/sd: ssi-sd: Support multiple block read (CMD18) hw/sd: ssi-sd: Use macros for the dummy value and tokens in the transfer hw/sd: sd: Remove duplicated codes in single/multiple block read/write hw/sd: sd: Allow single/multiple block write for SPI mode hw/sd: sd.h: Cosmetic change of using spaces hw/sd: Introduce receive_ready() callback hw/sd: ssi-sd: Support single block write hw/sd: ssi-sd: Support multiple block write hw/ssi: Add SiFive SPI controller support hw/riscv: sifive_u: Add QSPI0 controller and connect a flash hw/riscv: sifive_u: Add QSPI2 controller and connect an SD card hw/riscv: sifive_u: Change SIFIVE_U_GEM_IRQ to decimal value docs/system: Sort targets in alphabetical order docs/system: Add RISC-V documentation docs/system: riscv: Add documentation for sifive_u machine docs/system/riscv/sifive_u.rst | 336 +++++++++++++++++++++++++++++++++ docs/system/target-riscv.rst | 72 +++++++ docs/system/targets.rst | 20 +- include/hw/riscv/sifive_u.h | 9 +- include/hw/sd/sd.h | 44 ++--- include/hw/ssi/sifive_spi.h | 47 +++++ include/qemu/crc-ccitt.h | 33 ++++ hw/block/m25p80.c | 51 ++++- hw/riscv/sifive_u.c | 91 +++++++++ hw/sd/core.c | 13 ++ hw/sd/sd.c | 82 +------- hw/sd/ssi-sd.c | 127 +++++++++++-- hw/ssi/sifive_spi.c | 290 ++++++++++++++++++++++++++++ util/crc-ccitt.c | 127 +++++++++++++ hw/riscv/Kconfig | 3 + hw/ssi/Kconfig | 4 + hw/ssi/meson.build | 1 + util/meson.build | 1 + 18 files changed, 1232 insertions(+), 119 deletions(-) create mode 100644 docs/system/riscv/sifive_u.rst create mode 100644 docs/system/target-riscv.rst create mode 100644 include/hw/ssi/sifive_spi.h create mode 100644 include/qemu/crc-ccitt.h create mode 100644 hw/ssi/sifive_spi.c create mode 100644 util/crc-ccitt.c -- 2.25.1