From: Dmitry Fomichev <dmitry.fomic...@wdc.com> TP 4053 says (in section 2.3.1.1) - ... if a Zone Append command specifies a ZSLBA that is not the lowest logical block address in that zone, then the controller shall abort that command with a status code of Invalid Field In Command.
In the code, Zone Invalid Write is returned instead, fix this. Signed-off-by: Dmitry Fomichev <dmitry.fomic...@wdc.com> Signed-off-by: Klaus Jensen <k.jen...@samsung.com> --- hw/block/nvme.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/block/nvme.c b/hw/block/nvme.c index c73afdf8054f..35f39ecd9559 100644 --- a/hw/block/nvme.c +++ b/hw/block/nvme.c @@ -1150,7 +1150,7 @@ static uint16_t nvme_check_zone_write(NvmeCtrl *n, NvmeNamespace *ns, if (append) { if (unlikely(slba != zone->d.zslba)) { trace_pci_nvme_err_append_not_at_start(slba, zone->d.zslba); - status = NVME_ZONE_INVALID_WRITE; + status = NVME_INVALID_FIELD; } if (nvme_l2b(ns, nlb) > (n->page_size << n->zasl)) { trace_pci_nvme_err_append_too_large(slba, nlb, n->zasl); -- 2.30.0