From: Cédric Le Goater <c...@kaod.org> This moves the current documentation in files specific to each platform family. PowerNV machine is updated, the other machines need to be done.
Signed-off-by: Cédric Le Goater <c...@kaod.org> Message-Id: <20210222133956.156001-1-...@kaod.org> Reviewed-by: Greg Kurz <gr...@kaod.org> [dwg: Trivial capitalization fix] Signed-off-by: David Gibson <da...@gibson.dropbear.id.au> --- docs/system/ppc/embedded.rst | 10 ++ docs/system/ppc/powermac.rst | 34 ++++++ docs/system/ppc/powernv.rst | 193 +++++++++++++++++++++++++++++++++++ docs/system/ppc/prep.rst | 18 ++++ docs/system/ppc/pseries.rst | 12 +++ docs/system/target-ppc.rst | 53 +++------- 6 files changed, 282 insertions(+), 38 deletions(-) create mode 100644 docs/system/ppc/embedded.rst create mode 100644 docs/system/ppc/powermac.rst create mode 100644 docs/system/ppc/powernv.rst create mode 100644 docs/system/ppc/prep.rst create mode 100644 docs/system/ppc/pseries.rst diff --git a/docs/system/ppc/embedded.rst b/docs/system/ppc/embedded.rst new file mode 100644 index 0000000000..cfffbda24d --- /dev/null +++ b/docs/system/ppc/embedded.rst @@ -0,0 +1,10 @@ +Embedded family boards +====================== + +- ``bamboo`` bamboo +- ``mpc8544ds`` mpc8544ds +- ``ppce500`` generic paravirt e500 platform +- ``ref405ep`` ref405ep +- ``sam460ex`` aCube Sam460ex +- ``taihu`` taihu +- ``virtex-ml507`` Xilinx Virtex ML507 reference design diff --git a/docs/system/ppc/powermac.rst b/docs/system/ppc/powermac.rst new file mode 100644 index 0000000000..04334ba210 --- /dev/null +++ b/docs/system/ppc/powermac.rst @@ -0,0 +1,34 @@ +PowerMac family boards (``g3beige``, ``mac99``) +================================================================== + +Use the executable ``qemu-system-ppc`` to simulate a complete PowerMac +PowerPC system. + +- ``g3beige`` Heathrow based PowerMAC +- ``mac99`` Mac99 based PowerMAC + +Supported devices +----------------- + +QEMU emulates the following PowerMac peripherals: + + * UniNorth or Grackle PCI Bridge + * PCI VGA compatible card with VESA Bochs Extensions + * 2 PMAC IDE interfaces with hard disk and CD-ROM support + * NE2000 PCI adapters + * Non Volatile RAM + * VIA-CUDA with ADB keyboard and mouse. + + +Missing devices +--------------- + + * To be identified + +Firmware +-------- + +Since version 0.9.1, QEMU uses OpenBIOS https://www.openbios.org/ for +the g3beige and mac99 PowerMac and the 40p machines. OpenBIOS is a free +(GPL v2) portable firmware implementation. The goal is to implement a +100% IEEE 1275-1994 (referred to as Open Firmware) compliant firmware. diff --git a/docs/system/ppc/powernv.rst b/docs/system/ppc/powernv.rst new file mode 100644 index 0000000000..43c58bc32e --- /dev/null +++ b/docs/system/ppc/powernv.rst @@ -0,0 +1,193 @@ +PowerNV family boards (``powernv8``, ``powernv9``) +================================================================== + +PowerNV (as Non-Virtualized) is the "baremetal" platform using the +OPAL firmware. It runs Linux on IBM and OpenPOWER systems and it can +be used as an hypervisor OS, running KVM guests, or simply as a host +OS. + +The PowerNV QEMU machine tries to emulate a PowerNV system at the +level of the skiboot firmware, which loads the OS and provides some +runtime services. Power Systems have a lower firmware (HostBoot) that +does low level system initialization, like DRAM training. This is +beyond the scope of what QEMU addresses today. + +Supported devices +----------------- + + * Multi processor support for POWER8, POWER8NVL and POWER9. + * XSCOM, serial communication sideband bus to configure chiplets + * Simple LPC Controller + * Processor Service Interface (PSI) Controller + * Interrupt Controller, XICS (POWER8) and XIVE (POWER9) + * POWER8 PHB3 PCIe Host bridge and POWER9 PHB4 PCIe Host bridge + * Simple OCC is an on-chip microcontroller used for power management + tasks + * iBT device to handle BMC communication, with the internal BMC + simulator provided by QEMU or an external BMC such as an Aspeed + QEMU machine. + * PNOR containing the different firmware partitions. + +Missing devices +--------------- + +A lot is missing, among which : + + * POWER10 processor + * XIVE2 (POWER10) interrupt controller + * I2C controllers (yet to be merged) + * NPU/NPU2/NPU3 controllers + * EEH support for PCIe Host bridge controllers + * NX controller + * VAS controller + * chipTOD (Time Of Day) + * Self Boot Engine (SBE). + * FSI bus + +Firmware +-------- + +The OPAL firmware (OpenPower Abstraction Layer) for OpenPower systems +includes the runtime services `skiboot` and the bootloader kernel and +initramfs `skiroot`. Source code can be found on GitHub: + + https://github.com/open-power. + +Prebuilt images of `skiboot` and `skiboot` are made available on the `OpenPOWER <https://openpower.xyz/job/openpower/job/openpower-op-build/>`__ site. To boot a POWER9 machine, use the `witherspoon <https://openpower.xyz/job/openpower/job/openpower-op-build/label=slave,target=witherspoon/lastSuccessfulBuild/>`__ images. For POWER8, use +the `palmetto <https://openpower.xyz/job/openpower/job/openpower-op-build/label=slave,target=palmetto/lastSuccessfulBuild/>`__ images. + +QEMU includes a prebuilt image of `skiboot` which is updated when a +more recent version is required by the models. + +Boot options +------------ + +Here is a simple setup with one e1000e NIC : + +.. code-block:: bash + + $ qemu-system-ppc64 -m 2G -machine powernv9 -smp 2,cores=2,threads=1 \ + -accel tcg,thread=single \ + -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 \ + -netdev user,id=net0,hostfwd=::20022-:22,hostname=pnv \ + -kernel ./zImage.epapr \ + -initrd ./rootfs.cpio.xz \ + -nographic + +and a SATA disk : + +.. code-block:: bash + + -device ich9-ahci,id=sata0,bus=pcie.1,addr=0x0 \ + -drive file=./ubuntu-ppc64le.qcow2,if=none,id=drive0,format=qcow2,cache=none \ + -device ide-hd,bus=sata0.0,unit=0,drive=drive0,id=ide,bootindex=1 \ + +Complex PCIe configuration +~~~~~~~~~~~~~~~~~~~~~~~~~~ +Six PHBs are defined per chip (POWER9) but no default PCI layout is +provided (to be compatible with libvirt). One PCI device can be added +on any of the available PCIe slots using command line options such as: + +.. code-block:: bash + + -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 + -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 + + -device megasas,id=scsi0,bus=pcie.0,addr=0x0 + -drive file=./ubuntu-ppc64le.qcow2,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none + -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 + +Here is a full example with two different storage controllers on +different PHBs, each with a disk, the second PHB is empty : + +.. code-block:: bash + + $ qemu-system-ppc64 -m 2G -machine powernv9 -smp 2,cores=2,threads=1 -accel tcg,thread=single \ + -kernel ./zImage.epapr -initrd ./rootfs.cpio.xz -bios ./skiboot.lid \ + \ + -device megasas,id=scsi0,bus=pcie.0,addr=0x0 \ + -drive file=./rhel7-ppc64le.qcow2,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none \ + -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 \ + \ + -device pcie-pci-bridge,id=bridge1,bus=pcie.1,addr=0x0 \ + \ + -device ich9-ahci,id=sata0,bus=bridge1,addr=0x1 \ + -drive file=./ubuntu-ppc64le.qcow2,if=none,id=drive0,format=qcow2,cache=none \ + -device ide-hd,bus=sata0.0,unit=0,drive=drive0,id=ide,bootindex=1 \ + -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=bridge1,addr=0x2 \ + -netdev bridge,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=net0 \ + -device nec-usb-xhci,bus=bridge1,addr=0x7 \ + \ + -serial mon:stdio -nographic + +You can also use VIRTIO devices : + +.. code-block:: bash + + -drive file=./fedora-ppc64le.qcow2,if=none,snapshot=on,id=drive0 \ + -device virtio-blk-pci,drive=drive0,id=blk0,bus=pcie.0 \ + \ + -netdev tap,helper=/usr/lib/qemu/qemu-bridge-helper,br=virbr0,id=netdev0 \ + -device virtio-net-pci,netdev=netdev0,id=net0,bus=pcie.1 \ + \ + -fsdev local,id=fsdev0,path=$HOME,security_model=passthrough \ + -device virtio-9p-pci,fsdev=fsdev0,mount_tag=host,bus=pcie.2 + +Multi sockets +~~~~~~~~~~~~~ + +The number of sockets is deduced from the number of CPUs and the +number of cores. ``-smp 2,cores=1`` will define a machine with 2 +sockets of 1 core, whereas ``-smp 2,cores=2`` will define a machine +with 1 socket of 2 cores. ``-smp 8,cores=2``, 4 sockets of 2 cores. + +BMC configuration +~~~~~~~~~~~~~~~~~ + +OpenPOWER systems negotiate the shutdown and reboot with their +BMC. The QEMU PowerNV machine embeds an IPMI BMC simulator using the +iBT interface and should offer the same power features. + +If you want to define your own BMC, use ``-nodefaults`` and specify +one on the command line : + +.. code-block:: bash + + -device ipmi-bmc-sim,id=bmc0 -device isa-ipmi-bt,bmc=bmc0,irq=10 + +The files `palmetto-SDR.bin <http://www.kaod.org/qemu/powernv/palmetto-SDR.bin>`__ +and `palmetto-FRU.bin <http://www.kaod.org/qemu/powernv/palmetto-FRU.bin>`__ +define a Sensor Data Record repository and a Field Replaceable Unit +inventory for a palmetto BMC. They can be used to extend the QEMU BMC +simulator. + +.. code-block:: bash + + -device ipmi-bmc-sim,sdrfile=./palmetto-SDR.bin,fruareasize=256,frudatafile=./palmetto-FRU.bin,id=bmc0 \ + -device isa-ipmi-bt,bmc=bmc0,irq=10 + +The PowerNV machine can also be run with an external IPMI BMC device +connected to a remote QEMU machine acting as BMC, using these options +: + +.. code-block:: bash + + -chardev socket,id=ipmi0,host=localhost,port=9002,reconnect=10 \ + -device ipmi-bmc-extern,id=bmc0,chardev=ipmi0 \ + -device isa-ipmi-bt,bmc=bmc0,irq=10 \ + -nodefaults + +NVRAM +~~~~~ + +Use a MTD drive to add a PNOR to the machine, and get a NVRAM : + +.. code-block:: bash + + -drive file=./witherspoon.pnor,format=raw,if=mtd + +CAVEATS +------- + + * No support for multiple HW threads (SMT=1). Same as pseries. + * CPU can hang when doing intensive I/Os. Use ``-append powersave=off`` in that case. diff --git a/docs/system/ppc/prep.rst b/docs/system/ppc/prep.rst new file mode 100644 index 0000000000..bd9eb8eabd --- /dev/null +++ b/docs/system/ppc/prep.rst @@ -0,0 +1,18 @@ +Prep machine (``40p``) +================================================================== + +Use the executable ``qemu-system-ppc`` to simulate a complete 40P (PREP) + +Supported devices +----------------- + +QEMU emulates the following 40P (PREP) peripherals: + + * PCI Bridge + * PCI VGA compatible card with VESA Bochs Extensions + * 2 IDE interfaces with hard disk and CD-ROM support + * Floppy disk + * PCnet network adapters + * Serial port + * PREP Non Volatile RAM + * PC compatible keyboard and mouse. diff --git a/docs/system/ppc/pseries.rst b/docs/system/ppc/pseries.rst new file mode 100644 index 0000000000..932d4dd17d --- /dev/null +++ b/docs/system/ppc/pseries.rst @@ -0,0 +1,12 @@ +pSeries family boards (``pseries``) +=================================== + +Supported devices +----------------- + +Missing devices +--------------- + + +Firmware +-------- diff --git a/docs/system/target-ppc.rst b/docs/system/target-ppc.rst index a2f04c533c..67905b8f2a 100644 --- a/docs/system/target-ppc.rst +++ b/docs/system/target-ppc.rst @@ -3,45 +3,22 @@ PowerPC System emulator ----------------------- -Use the executable ``qemu-system-ppc`` to simulate a complete 40P (PREP) -or PowerMac PowerPC system. +Board-specific documentation +============================ -QEMU emulates the following PowerMac peripherals: +You can get a complete list by running ``qemu-system-ppc64 --machine +help``. -- UniNorth or Grackle PCI Bridge +.. + This table of contents should be kept sorted alphabetically + by the title text of each file, which isn't the same ordering + as an alphabetical sort by filename. -- PCI VGA compatible card with VESA Bochs Extensions +.. toctree:: + :maxdepth: 1 -- 2 PMAC IDE interfaces with hard disk and CD-ROM support - -- NE2000 PCI adapters - -- Non Volatile RAM - -- VIA-CUDA with ADB keyboard and mouse. - -QEMU emulates the following 40P (PREP) peripherals: - -- PCI Bridge - -- PCI VGA compatible card with VESA Bochs Extensions - -- 2 IDE interfaces with hard disk and CD-ROM support - -- Floppy disk - -- PCnet network adapters - -- Serial port - -- PREP Non Volatile RAM - -- PC compatible keyboard and mouse. - -Since version 0.9.1, QEMU uses OpenBIOS https://www.openbios.org/ for -the g3beige and mac99 PowerMac and the 40p machines. OpenBIOS is a free -(GPL v2) portable firmware implementation. The goal is to implement a -100% IEEE 1275-1994 (referred to as Open Firmware) compliant firmware. - -More information is available at -http://perso.magic.fr/l_indien/qemu-ppc/. + ppc/embedded + ppc/powermac + ppc/powernv + ppc/prep + ppc/pseries -- 2.29.2
