POWER10 adds a new bit that modifies interrupt behaviour, LPCR[HAIL],
and it removes support for the LPCR[AIL]=0b10 mode.
Reviewed-by: Cédric Le Goater <c...@kaod.org>
Tested-by: Cédric Le Goater <c...@kaod.org>
Signed-off-by: Nicholas Piggin <npig...@gmail.com>
---
hw/ppc/spapr_hcall.c | 7 ++++-
target/ppc/cpu-qom.h | 2 ++
target/ppc/cpu.h | 5 ++--
target/ppc/excp_helper.c | 51 +++++++++++++++++++++++++++++++--
target/ppc/translate.c | 3 +-
target/ppc/translate_init.c.inc | 2 +-
6 files changed, 62 insertions(+), 8 deletions(-)
diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c
index 2fbe04a689..6802cd4dc8 100644
--- a/hw/ppc/spapr_hcall.c
+++ b/hw/ppc/spapr_hcall.c
@@ -1396,7 +1396,12 @@ static target_ulong
h_set_mode_resource_addr_trans_mode(PowerPCCPU *cpu,
}
if (mflags == 1) {
- /* AIL=1 is reserved */
+ /* AIL=1 is reserved in POWER8/POWER9 */
+ return H_UNSUPPORTED_FLAG;
+ }
+
+ if (mflags == 2 && (pcc->insns_flags2 & PPC2_ISA310)) {
+ /* AIL=2 is also reserved in POWER10 (ISA v3.1) */
return H_UNSUPPORTED_FLAG;
}
diff --git a/target/ppc/cpu-qom.h b/target/ppc/cpu-qom.h
index 118baf8d41..06b6571bc9 100644
--- a/target/ppc/cpu-qom.h
+++ b/target/ppc/cpu-qom.h
@@ -116,6 +116,8 @@ enum powerpc_excp_t {
POWERPC_EXCP_POWER8,
/* POWER9 exception model */
POWERPC_EXCP_POWER9,
+ /* POWER10 exception model */
+ POWERPC_EXCP_POWER10,
};
/*****************************************************************************/
diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
index 5200a16d23..9d35cdfa92 100644
--- a/target/ppc/cpu.h
+++ b/target/ppc/cpu.h
@@ -354,10 +354,11 @@ typedef struct ppc_v3_pate_t {
#define LPCR_PECE_U_SHIFT (63 - 19)
#define LPCR_PECE_U_MASK (0x7ull << LPCR_PECE_U_SHIFT)
#define LPCR_HVEE PPC_BIT(17) /* Hypervisor Virt Exit Enable */
-#define LPCR_RMLS_SHIFT (63 - 37)
+#define LPCR_RMLS_SHIFT (63 - 37) /* RMLS (removed in ISA v3.0) */
#define LPCR_RMLS (0xfull << LPCR_RMLS_SHIFT)
+#define LPCR_HAIL PPC_BIT(37) /* ISA v3.1 HV AIL=3 equivalent */
#define LPCR_ILE PPC_BIT(38)
-#define LPCR_AIL_SHIFT (63 - 40) /* Alternate interrupt location */
+#define LPCR_AIL_SHIFT (63 - 40) /* Alternate interrupt location */
#define LPCR_AIL (3ull << LPCR_AIL_SHIFT)
#define LPCR_UPRT PPC_BIT(41) /* Use Process Table */
#define LPCR_EVIRT PPC_BIT(42) /* Enhanced Virtualisation */
diff --git a/target/ppc/excp_helper.c b/target/ppc/excp_helper.c
index 964a58cfdc..38a1482519 100644
--- a/target/ppc/excp_helper.c
+++ b/target/ppc/excp_helper.c
@@ -170,7 +170,27 @@ static int powerpc_reset_wakeup(CPUState *cs, CPUPPCState
*env, int excp,
* +-------------------------------------------------------+
*
* The difference with POWER9 being that MSR[HV] 0->1 interrupts can be sent to
- * the hypervisor in AIL mode if the guest is radix.
+ * the hypervisor in AIL mode if the guest is radix. This is good for
+ * performance but allows the guest to influence the AIL of hypervisor
+ * interrupts using its MSR, and also the hypervisor must disallow guest
+ * interrupts (MSR[HV] 0->0) from using AIL if the hypervisor does not want to
+ * use AIL for its MSR[HV] 0->1 interrupts.
+ *
+ * POWER10 addresses those issues with a new LPCR[HAIL] bit that is applied to
+ * interrupts that begin execution with MSR[HV]=1 (so both MSR[HV] 0->1 and
+ * MSR[HV] 1->1).
+ *
+ * HAIL=1 is equivalent to AIL=3, for interrupts delivered with MSR[HV]=1.
+ *
+ * POWER10 behaviour is
+ * | LPCR[AIL] | LPCR[HAIL] | MSR[IR||DR] | MSR[HV] | new MSR[HV] | AIL |
+ * +-----------+------------+-------------+---------+-------------+-----+
+ * | a | h | 00/01/10 | 0 | 0 | 0 |
+ * | a | h | 11 | 0 | 0 | a |
+ * | a | h | x | 0 | 1 | h |
+ * | a | h | 00/01/10 | 1 | 1 | 0 |
+ * | a | h | 11 | 1 | 1 | h |
+ * +--------------------------------------------------------------------+
*/
static inline void ppc_excp_apply_ail(PowerPCCPU *cpu, int excp_model, int
excp,
target_ulong msr,
@@ -210,6 +230,29 @@ static inline void ppc_excp_apply_ail(PowerPCCPU *cpu, int
excp_model, int excp,
/* AIL=1 is reserved */
return;
}
+
+ } else if (excp_model == POWERPC_EXCP_POWER10) {
+ if (!mmu_all_on && !hv_escalation) {
+ /*
+ * AIL works for HV interrupts even with guest MSR[IR/DR] disabled.
+ * Guest->guest and HV->HV interrupts do require MMU on.
+ */
+ return;
+ }
+
+ if (*new_msr & MSR_HVB) {
+ if (!(env->spr[SPR_LPCR] & LPCR_HAIL)) {
+ /* HV interrupts depend on LPCR[HAIL] */
+ return;
+ }
+ ail = 3; /* HAIL=1 gives AIL=3 behaviour for HV interrupts */
+ } else {
+ ail = (env->spr[SPR_LPCR] & LPCR_AIL) >> LPCR_AIL_SHIFT;
+ }
+ if (ail != 3) {
+ /* AIL=1 and AIL=2 are reserved */
+ return;
+ }
} else {
/* Other processors do not support AIL */
return;
@@ -322,7 +365,8 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int
excp_model, int excp)
#if defined(TARGET_PPC64)
if (excp_model == POWERPC_EXCP_POWER7 ||
excp_model == POWERPC_EXCP_POWER8 ||
- excp_model == POWERPC_EXCP_POWER9) {
+ excp_model == POWERPC_EXCP_POWER9 ||
+ excp_model == POWERPC_EXCP_POWER10) {
lpes0 = !!(env->spr[SPR_LPCR] & LPCR_LPES0);
} else
#endif /* defined(TARGET_PPC64) */
@@ -842,7 +886,8 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int
excp_model, int excp)
} else if (env->spr[SPR_LPCR] & LPCR_ILE) {
new_msr |= (target_ulong)1 << MSR_LE;
}
- } else if (excp_model == POWERPC_EXCP_POWER9) {
+ } else if (excp_model == POWERPC_EXCP_POWER9 ||
+ excp_model == POWERPC_EXCP_POWER10) {
if (new_msr & MSR_HVB) {
if (env->spr[SPR_HID0] & HID0_POWER9_HILE) {
new_msr |= (target_ulong)1 << MSR_LE;
diff --git a/target/ppc/translate.c b/target/ppc/translate.c
index 0984ce637b..e9ed001229 100644
--- a/target/ppc/translate.c
+++ b/target/ppc/translate.c
@@ -7731,7 +7731,8 @@ void ppc_cpu_dump_state(CPUState *cs, FILE *f, int flags)
#if defined(TARGET_PPC64)
if (env->excp_model == POWERPC_EXCP_POWER7 ||
env->excp_model == POWERPC_EXCP_POWER8 ||
- env->excp_model == POWERPC_EXCP_POWER9) {
+ env->excp_model == POWERPC_EXCP_POWER9 ||
+ env->excp_model == POWERPC_EXCP_POWER10) {
qemu_fprintf(f, "HSRR0 " TARGET_FMT_lx " HSRR1 " TARGET_FMT_lx "\n",
env->spr[SPR_HSRR0], env->spr[SPR_HSRR1]);
}
diff --git a/target/ppc/translate_init.c.inc b/target/ppc/translate_init.c.inc
index a82d9ed647..76d82cc2f6 100644
--- a/target/ppc/translate_init.c.inc
+++ b/target/ppc/translate_init.c.inc
@@ -9317,7 +9317,7 @@ POWERPC_FAMILY(POWER10)(ObjectClass *oc, void *data)
pcc->radix_page_info = &POWER10_radix_page_info;
pcc->lrg_decr_bits = 56;
#endif
- pcc->excp_model = POWERPC_EXCP_POWER9;
+ pcc->excp_model = POWERPC_EXCP_POWER10;
pcc->bus_model = PPC_FLAGS_INPUT_POWER9;
pcc->bfd_mach = bfd_mach_ppc64;
pcc->flags = POWERPC_FLAG_VRE | POWERPC_FLAG_SE |
--
2.23.0
