On 09/09/2011 06:28 PM, al pat wrote:
We are doing an experiment with kvm-clock to validate its
effectiveness, particularly when running NTP on the host to make sure
the host’s clock stays properly sync.
Our observations leads us to a few unanswered questions, including the
possibility of a bug (our our misunderstanding of how kvm_clock should
work).
Our understanding is that kvm_clock will help sync the clock between
the host and the guest. We do not observe this to happen in reality
and thus this question.
We are using Ubuntu 11.04 on the host and the guest.
The command we issue to launch the VM is the following:
$ sudo kvm -m 500 -rtc clock=host guestos.img
We also arranged for Ubuntu to show the seconds on the clock displayed
in the menu.
Observation 1:
Upon launching the VM, we see a time difference between the 2 clock
ranging from 1 to 2 seconds.
Observation 2:
If we change the date on the host (with a command such as “date --set
10:00:00 AM Sep 9, 2011”), the time on the guest remains the same,
unaffected.
Observation 3:
After running for a while without NTP on the host, we run “ntpdate” to
sync up the host, but the guest stick with whatever previous time.
You probably meant "ntpd -q"
Another test we will run is to have ntpd on the host and wait for an
extended time to see if the guest drifts away from that original 1 or
2 second lag. In the meantime, we are asking you for some input in
this regards:
Questions
-What does the “–rtc clock” option is supposed to mean exactly?
According to the man page, the guest should get its time from the
host, but neither date nor an “ntpdate” affected the clock on the guest.
-What are the other options that we should use?
-rtc [base=utc|localtime|date][,clock=host|vm][,driftfix=none|slew]
Specify base as "utc" or "localtime" to let the RTC start at the
current UTC or local time, respectively. "localtime" is required
for correct date in MS-DOS or Windows. To start at a
specific point
in time, provide date in the format "2006-06-17T16:01:21" or
"2006-06-17". The default base is UTC.
By default the RTC is driven by the host system time. This
allows
to use the RTC as accurate reference clock inside the guest,
specifically if the host time is smoothly following an accurate
external reference clock, e.g. via NTP. If you want to
isolate the
guest time from the host, even prevent it from progressing
during
suspension, you can set clock to "vm" instead.
Enable driftfix (i386 targets only) if you experience time drift
problems, specifically with Windows' ACPI HAL. This option
will try
to figure out how many timer interrupts were not processed
by the
Windows guest and will re-inject them.
Can someone shed light on what we are missing? Any pointers will be
helpful.
Thanks
-a