From: Matheus Ferst <matheus.fe...@eldorado.org.br>
Additionally, REQUIRE_64BIT when L=1 to match what is specified in The
Programming Environments Manual:
"For 32-bit implementations, the L field must be cleared, otherwise the
instruction form is invalid."
Some CPUs are known to deviate from this specification by ignoring the
L bit [1]. The stricter behavior, however, can help users that test
software with qemu, making it more likely to detect bugs that would
otherwise be silent.
If deemed necessary, a future patch can adapt this behavior based on
the specific CPU model.
[1] The 601 manual is the only one I've found that explicitly states
that the L bit is ignored, but we also observe this behavior in a 7447A
v1.2.
Signed-off-by: Matheus Ferst <matheus.fe...@eldorado.org.br>
Message-Id: <20210601193528.2533031-15-matheus.fe...@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.hender...@linaro.org>
[dwg: Corrected whitespace error]
Signed-off-by: David Gibson <da...@gibson.dropbear.id.au>
---
target/ppc/insn32.decode | 14 ++++++
target/ppc/translate.c | 52 ----------------------
target/ppc/translate/fixedpoint-impl.c.inc | 31 +++++++++++++
3 files changed, 45 insertions(+), 52 deletions(-)
diff --git a/target/ppc/insn32.decode b/target/ppc/insn32.decode
index 93e5d44d9e..9fd8d6b817 100644
--- a/target/ppc/insn32.decode
+++ b/target/ppc/insn32.decode
@@ -20,6 +20,10 @@
&D rt ra si:int64_t
@D ...... rt:5 ra:5 si:s16 &D
+&D_bf bf l:bool ra imm
+@D_bfs ...... bf:3 - l:1 ra:5 imm:s16 &D_bf
+@D_bfu ...... bf:3 - l:1 ra:5 imm:16 &D_bf
+
%ds_si 2:s14 !function=times_4
@DS ...... rt:5 ra:5 .............. .. &D si=%ds_si
@@ -36,6 +40,9 @@
&X_bi rt bi
@X_bi ...... rt:5 bi:5 ----- .......... - &X_bi
+&X_bfl bf l:bool ra rb
+@X_bfl ...... bf:3 - l:1 ra:5 rb:5 ..........- &X_bfl
+
### Fixed-Point Load Instructions
LBZ 100010 ..... ..... ................ @D
@@ -89,6 +96,13 @@ STDU 111110 ..... ..... ..............01 @DS
STDX 011111 ..... ..... ..... 0010010101 - @X
STDUX 011111 ..... ..... ..... 0010110101 - @X
+### Fixed-Point Compare Instructions
+
+CMP 011111 ... - . ..... ..... 0000000000 - @X_bfl
+CMPL 011111 ... - . ..... ..... 0000100000 - @X_bfl
+CMPI 001011 ... - . ..... ................ @D_bfs
+CMPLI 001010 ... - . ..... ................ @D_bfu
+
### Fixed-Point Arithmetic Instructions
ADDI 001110 ..... ..... ................ @D
diff --git a/target/ppc/translate.c b/target/ppc/translate.c
index 35d8831d44..95e4d9b815 100644
--- a/target/ppc/translate.c
+++ b/target/ppc/translate.c
@@ -1489,54 +1489,6 @@ static inline void gen_set_Rc0(DisasContext *ctx, TCGv
reg)
}
}
-/* cmp */
-static void gen_cmp(DisasContext *ctx)
-{
- if ((ctx->opcode & 0x00200000) && (ctx->insns_flags & PPC_64B)) {
- gen_op_cmp(cpu_gpr[rA(ctx->opcode)], cpu_gpr[rB(ctx->opcode)],
- 1, crfD(ctx->opcode));
- } else {
- gen_op_cmp32(cpu_gpr[rA(ctx->opcode)], cpu_gpr[rB(ctx->opcode)],
- 1, crfD(ctx->opcode));
- }
-}
-
-/* cmpi */
-static void gen_cmpi(DisasContext *ctx)
-{
- if ((ctx->opcode & 0x00200000) && (ctx->insns_flags & PPC_64B)) {
- gen_op_cmpi(cpu_gpr[rA(ctx->opcode)], SIMM(ctx->opcode),
- 1, crfD(ctx->opcode));
- } else {
- gen_op_cmpi32(cpu_gpr[rA(ctx->opcode)], SIMM(ctx->opcode),
- 1, crfD(ctx->opcode));
- }
-}
-
-/* cmpl */
-static void gen_cmpl(DisasContext *ctx)
-{
- if ((ctx->opcode & 0x00200000) && (ctx->insns_flags & PPC_64B)) {
- gen_op_cmp(cpu_gpr[rA(ctx->opcode)], cpu_gpr[rB(ctx->opcode)],
- 0, crfD(ctx->opcode));
- } else {
- gen_op_cmp32(cpu_gpr[rA(ctx->opcode)], cpu_gpr[rB(ctx->opcode)],
- 0, crfD(ctx->opcode));
- }
-}
-
-/* cmpli */
-static void gen_cmpli(DisasContext *ctx)
-{
- if ((ctx->opcode & 0x00200000) && (ctx->insns_flags & PPC_64B)) {
- gen_op_cmpi(cpu_gpr[rA(ctx->opcode)], UIMM(ctx->opcode),
- 0, crfD(ctx->opcode));
- } else {
- gen_op_cmpi32(cpu_gpr[rA(ctx->opcode)], UIMM(ctx->opcode),
- 0, crfD(ctx->opcode));
- }
-}
-
/* cmprb - range comparison: isupper, isaplha, islower*/
static void gen_cmprb(DisasContext *ctx)
{
@@ -7639,10 +7591,6 @@ GEN_HANDLER_E(brw, 0x1F, 0x1B, 0x04, 0x0000F801,
PPC_NONE, PPC2_ISA310),
GEN_HANDLER_E(brh, 0x1F, 0x1B, 0x06, 0x0000F801, PPC_NONE, PPC2_ISA310),
#endif
GEN_HANDLER(invalid, 0x00, 0x00, 0x00, 0xFFFFFFFF, PPC_NONE),
-GEN_HANDLER(cmp, 0x1F, 0x00, 0x00, 0x00400000, PPC_INTEGER),
-GEN_HANDLER(cmpi, 0x0B, 0xFF, 0xFF, 0x00400000, PPC_INTEGER),
-GEN_HANDLER(cmpl, 0x1F, 0x00, 0x01, 0x00400001, PPC_INTEGER),
-GEN_HANDLER(cmpli, 0x0A, 0xFF, 0xFF, 0x00400000, PPC_INTEGER),
#if defined(TARGET_PPC64)
GEN_HANDLER_E(cmpeqb, 0x1F, 0x00, 0x07, 0x00600000, PPC_NONE, PPC2_ISA300),
#endif
diff --git a/target/ppc/translate/fixedpoint-impl.c.inc
b/target/ppc/translate/fixedpoint-impl.c.inc
index 2713366791..8864ac4516 100644
--- a/target/ppc/translate/fixedpoint-impl.c.inc
+++ b/target/ppc/translate/fixedpoint-impl.c.inc
@@ -165,6 +165,37 @@ TRANS64(STDU, do_ldst_D, true, true, MO_Q)
TRANS64(STDUX, do_ldst_X, true, true, MO_Q)
TRANS64(PSTD, do_ldst_PLS_D, false, true, MO_Q)
+/*
+ * Fixed-Point Compare Instructions
+ */
+
+static bool do_cmp_X(DisasContext *ctx, arg_X_bfl *a, bool s)
+{
+ if (a->l) {
+ REQUIRE_64BIT(ctx);
+ gen_op_cmp(cpu_gpr[a->ra], cpu_gpr[a->rb], s, a->bf);
+ } else {
+ gen_op_cmp32(cpu_gpr[a->ra], cpu_gpr[a->rb], s, a->bf);
+ }
+ return true;
+}
+
+static bool do_cmp_D(DisasContext *ctx, arg_D_bf *a, bool s)
+{
+ if (a->l) {
+ REQUIRE_64BIT(ctx);
+ gen_op_cmp(cpu_gpr[a->ra], tcg_constant_tl(a->imm), s, a->bf);
+ } else {
+ gen_op_cmp32(cpu_gpr[a->ra], tcg_constant_tl(a->imm), s, a->bf);
+ }
+ return true;
+}
+
+TRANS(CMP, do_cmp_X, true);
+TRANS(CMPL, do_cmp_X, false);
+TRANS(CMPI, do_cmp_D, true);
+TRANS(CMPLI, do_cmp_D, false);
+
/*
* Fixed-Point Arithmetic Instructions
*/
--
2.31.1
