On Thu, Jul 22, 2021 at 06:59:45AM -0400, Igor Mammedov wrote: > Commit 17858a1695 (hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35) > switched PCI hotplug from native to ACPI one by default. > > That however breaks ihotplug on following CLI that used to work:
s/ihotplug/hotplug/ > -nodefaults -machine q35 \ > -device > pcie-root-port,id=pcie-root-port-0,multifunction=on,bus=pcie.0,addr=0x1,chassis=1 > \ > -device > pcie-root-port,id=pcie-root-port-1,port=0x1,addr=0x1.0x1,bus=pcie.0,chassis=2 > > where PCI device is hotplugged to pcie-root-port-1 with error on guest side: > > ACPI BIOS Error (bug): Could not resolve symbol [^S0B.PCNT], AE_NOT_FOUND > (20201113/psargs-330) > ACPI Error: Aborting method \_SB.PCI0.PCNT due to previous error > (AE_NOT_FOUND) (20201113/psparse-531) > ACPI Error: Aborting method \_GPE._E01 due to previous error (AE_NOT_FOUND) > (20201113/psparse-531) > ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_E01] > (20201113/evgpe-515) > > cause is that QEMU's ACPI hotplug never supported functions other then 0 > and due to bug it was generating notification entries for not described > functions. > > Technically there is no reason not to describe cold-plugged bridges > (root ports) on functions other then 0, as they similaraly to bridge s/similaraly/similarly/ > on function 0 are unpluggable. > > Fix consists of describing cold-plugged bridges[root ports] on functions > other than 0. > > Fixes: 17858a169508609ca9063c544833e5a1adeb7b52 > Signed-off-by: Igor Mammedov <imamm...@redhat.com> > Reported-by: Laurent Vivier <lviv...@redhat.com> Regards, Daniel -- |: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|