From: Peter Delevoryas <p...@fb.com>
When you run QEMU with an Aspeed machine and a single serial device
using stdio like this:
qemu -machine ast2600-evb -drive ... -serial stdio
The guest OS can read and write to the UART5 registers at 0x1E784000 and
it will receive from stdin and write to stdout. The Aspeed SoC's have a
lot more UART's though (AST2500 has 5, AST2600 has 13) and depending on
the board design, may be using any of them as the serial console. (See
"stdout-path" in a DTS to check which one is chosen).
Most boards, including all of those currently defined in
hw/arm/aspeed.c, just use UART5, but some use UART1. This change adds
some flexibility for different boards without requiring users to change
their command-line invocation of QEMU.
I tested this doesn't break existing code by booting an AST2500 OpenBMC
image and an AST2600 OpenBMC image, each using UART5 as the console.
Then I tested switching the default to UART1 and booting an AST2600
OpenBMC image that uses UART1, and that worked too.
Signed-off-by: Peter Delevoryas <p...@fb.com>
Reviewed-by: Cédric Le Goater <c...@kaod.org>
Message-Id: <20210901153615.2746885-2-p...@fb.com>
Signed-off-by: Cédric Le Goater <c...@kaod.org>
---
include/hw/arm/aspeed.h | 1 +
include/hw/arm/aspeed_soc.h | 1 +
hw/arm/aspeed.c | 3 +++
hw/arm/aspeed_ast2600.c | 8 ++++----
hw/arm/aspeed_soc.c | 8 +++++---
5 files changed, 14 insertions(+), 7 deletions(-)
diff --git a/include/hw/arm/aspeed.h b/include/hw/arm/aspeed.h
index c9747b15fc5f..cbeacb214ca4 100644
--- a/include/hw/arm/aspeed.h
+++ b/include/hw/arm/aspeed.h
@@ -38,6 +38,7 @@ struct AspeedMachineClass {
uint32_t num_cs;
uint32_t macs_mask;
void (*i2c_init)(AspeedMachineState *bmc);
+ uint32_t uart_default;
};
diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
index d9161d26d645..87d76c92598b 100644
--- a/include/hw/arm/aspeed_soc.h
+++ b/include/hw/arm/aspeed_soc.h
@@ -65,6 +65,7 @@ struct AspeedSoCState {
AspeedSDHCIState sdhci;
AspeedSDHCIState emmc;
AspeedLPCState lpc;
+ uint32_t uart_default;
};
#define TYPE_ASPEED_SOC "aspeed-soc"
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 886e5992cdf3..7a9459340cf4 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -350,6 +350,8 @@ static void aspeed_machine_init(MachineState *machine)
object_property_set_int(OBJECT(&bmc->soc), "hw-prot-key",
ASPEED_SCU_PROT_KEY, &error_abort);
}
+ qdev_prop_set_uint32(DEVICE(&bmc->soc), "uart-default",
+ amc->uart_default);
qdev_realize(DEVICE(&bmc->soc), NULL, &error_abort);
memory_region_add_subregion(get_system_memory(),
@@ -848,6 +850,7 @@ static void aspeed_machine_class_init(ObjectClass *oc, void
*data)
mc->no_parallel = 1;
mc->default_ram_id = "ram";
amc->macs_mask = ASPEED_MAC0_ON;
+ amc->uart_default = ASPEED_DEV_UART5;
aspeed_machine_class_props_init(oc);
}
diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
index 8e1993790e6f..9d70e8e060c6 100644
--- a/hw/arm/aspeed_ast2600.c
+++ b/hw/arm/aspeed_ast2600.c
@@ -322,10 +322,10 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev,
Error **errp)
sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq);
}
- /* UART - attach an 8250 to the IO space as our UART5 */
- serial_mm_init(get_system_memory(), sc->memmap[ASPEED_DEV_UART5], 2,
- aspeed_soc_get_irq(s, ASPEED_DEV_UART5),
- 38400, serial_hd(0), DEVICE_LITTLE_ENDIAN);
+ /* UART - attach an 8250 to the IO space as our UART */
+ serial_mm_init(get_system_memory(), sc->memmap[s->uart_default], 2,
+ aspeed_soc_get_irq(s, s->uart_default), 38400,
+ serial_hd(0), DEVICE_LITTLE_ENDIAN);
/* I2C */
object_property_set_link(OBJECT(&s->i2c), "dram", OBJECT(s->dram_mr),
diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
index 3ad6c56fa9a9..ed84502e238a 100644
--- a/hw/arm/aspeed_soc.c
+++ b/hw/arm/aspeed_soc.c
@@ -287,9 +287,9 @@ static void aspeed_soc_realize(DeviceState *dev, Error
**errp)
sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq);
}
- /* UART - attach an 8250 to the IO space as our UART5 */
- serial_mm_init(get_system_memory(), sc->memmap[ASPEED_DEV_UART5], 2,
- aspeed_soc_get_irq(s, ASPEED_DEV_UART5), 38400,
+ /* UART - attach an 8250 to the IO space as our UART */
+ serial_mm_init(get_system_memory(), sc->memmap[s->uart_default], 2,
+ aspeed_soc_get_irq(s, s->uart_default), 38400,
serial_hd(0), DEVICE_LITTLE_ENDIAN);
/* I2C */
@@ -439,6 +439,8 @@ static void aspeed_soc_realize(DeviceState *dev, Error
**errp)
static Property aspeed_soc_properties[] = {
DEFINE_PROP_LINK("dram", AspeedSoCState, dram_mr, TYPE_MEMORY_REGION,
MemoryRegion *),
+ DEFINE_PROP_UINT32("uart-default", AspeedSoCState, uart_default,
+ ASPEED_DEV_UART5),
DEFINE_PROP_END_OF_LIST(),
};
--
2.31.1
