From: Frank Chang <frank.ch...@sifive.com> This patchset implements the vector extension v1.0 for RISC-V on QEMU.
RVV v1.0 spec is now fronzen for public review: https://github.com/riscv/riscv-v-spec/releases/tag/v1.0 The port is available here: https://github.com/sifive/qemu/tree/rvv-1.0-upstream-v8 RVV v1.0 can be enabled with -cpu option: v=true and specify vext_spec option to v1.0 (i.e. vext_spec=v1.0) Note: This patchset depends on other patchsets listed in Based-on section below so it is not able to be built unless those patchsets are applied. Changelog: v8 * Use {get,dest}_gpr APIs. * remove vector AMO instructions. * rename vpopc.m to vcpop.m. * rename vle1.v and vse1.v to vlm.v and vsm.v. * rename vmandnot.mm and vmornot.mm to vmandn.mm and vmorn.mm. v7 * remove hardcoded GDB vector registers list. * add vsetivli instruction. * add vle1.v and vse1.v instructions. v6 * add vector floating-point reciprocal estimate instruction. * add vector floating-point reciprocal square-root estimate instruction. * update check rules for segment register groups, each segment register group has to follow overlap rules. * update viota.m instruction check rules. v5 * refactor RVV v1.0 check functions. (Thanks to Richard Henderson's bitwise tricks.) * relax RV_VLEN_MAX to 1024-bits. * implement vstart CSR's behaviors. * trigger illegal instruction exception if frm is not valid for vector floating-point instructions. * rebase on riscv-to-apply.next. v4 * remove explicit float flmul variable in DisasContext. * replace floating-point calculations with shift operations to improve performance. * relax RV_VLEN_MAX to 512-bits. v3 * apply nan-box helpers from Richard Henderson. * remove fp16 api changes as they are sent independently in another pathcset by Chih-Min Chao. * remove all tail elements clear functions as tail elements can retain unchanged for either VTA set to undisturbed or agnostic. * add fp16 nan-box check generator function. * add floating-point rounding mode enum. * replace flmul arithmetic with shifts to avoid floating-point conversions. * add Zvqmac extension. * replace gdbstub vector register xml files with dynamic generator. * bumped to RVV v1.0. * RVV v1.0 related changes: * add vl<nf>re<eew>.v and vs<nf>r.v vector whole register load/store instructions * add vrgatherei16 instruction. * rearranged bits in vtype to make vlmul bits into a contiguous field. v2 * drop v0.7.1 support. * replace invisible return check macros with functions. * move mark_vs_dirty() to translators. * add SSTATUS_VS flag for s-mode. * nan-box scalar fp register for floating-point operations. * add gdbstub files for vector registers to allow system-mode debugging with GDB. Based-on: <20211015065500.3850513-1-frank.ch...@sifive.com> Based-on: <20211015070307.3860984-1-frank.ch...@sifive.com> Frank Chang (73): target/riscv: fix TB_FLAGS bits overlapping bug for rvv/rvh target/riscv: drop vector 0.7.1 and add 1.0 support target/riscv: Use FIELD_EX32() to extract wd field target/riscv: rvv-1.0: introduce writable misa.v field target/riscv: rvv-1.0: add translation-time vector context status target/riscv: rvv-1.0: remove rvv related codes from fcsr registers target/riscv: rvv-1.0: check MSTATUS_VS when accessing vector csr registers target/riscv: rvv-1.0: remove MLEN calculations target/riscv: rvv-1.0: add fractional LMUL target/riscv: rvv-1.0: add VMA and VTA target/riscv: rvv-1.0: update check functions target/riscv: introduce more imm value modes in translator functions target/riscv: rvv:1.0: add translation-time nan-box helper function target/riscv: rvv-1.0: remove amo operations instructions target/riscv: rvv-1.0: configure instructions target/riscv: rvv-1.0: stride load and store instructions target/riscv: rvv-1.0: index load and store instructions target/riscv: rvv-1.0: fix address index overflow bug of indexed load/store insns target/riscv: rvv-1.0: fault-only-first unit stride load target/riscv: rvv-1.0: load/store whole register instructions target/riscv: rvv-1.0: update vext_max_elems() for load/store insns target/riscv: rvv-1.0: take fractional LMUL into vector max elements calculation target/riscv: rvv-1.0: floating-point square-root instruction target/riscv: rvv-1.0: floating-point classify instructions target/riscv: rvv-1.0: count population in mask instruction target/riscv: rvv-1.0: find-first-set mask bit instruction target/riscv: rvv-1.0: set-X-first mask bit instructions target/riscv: rvv-1.0: iota instruction target/riscv: rvv-1.0: element index instruction target/riscv: rvv-1.0: allow load element with sign-extended target/riscv: rvv-1.0: register gather instructions target/riscv: rvv-1.0: integer scalar move instructions target/riscv: rvv-1.0: floating-point move instruction target/riscv: rvv-1.0: floating-point scalar move instructions target/riscv: rvv-1.0: whole register move instructions target/riscv: rvv-1.0: integer extension instructions target/riscv: rvv-1.0: single-width averaging add and subtract instructions target/riscv: rvv-1.0: single-width bit shift instructions target/riscv: rvv-1.0: integer add-with-carry/subtract-with-borrow target/riscv: rvv-1.0: narrowing integer right shift instructions target/riscv: rvv-1.0: widening integer multiply-add instructions target/riscv: rvv-1.0: single-width saturating add and subtract instructions target/riscv: rvv-1.0: integer comparison instructions target/riscv: rvv-1.0: floating-point compare instructions target/riscv: rvv-1.0: mask-register logical instructions target/riscv: rvv-1.0: slide instructions target/riscv: rvv-1.0: floating-point slide instructions target/riscv: rvv-1.0: narrowing fixed-point clip instructions target/riscv: rvv-1.0: single-width floating-point reduction target/riscv: rvv-1.0: widening floating-point reduction instructions target/riscv: rvv-1.0: single-width scaling shift instructions target/riscv: rvv-1.0: remove widening saturating scaled multiply-add target/riscv: rvv-1.0: remove vmford.vv and vmford.vf target/riscv: rvv-1.0: remove integer extract instruction target/riscv: rvv-1.0: floating-point min/max instructions target/riscv: introduce floating-point rounding mode enum target/riscv: rvv-1.0: floating-point/integer type-convert instructions target/riscv: rvv-1.0: widening floating-point/integer type-convert target/riscv: add "set round to odd" rounding mode helper function target/riscv: rvv-1.0: narrowing floating-point/integer type-convert target/riscv: rvv-1.0: relax RV_VLEN_MAX to 1024-bits target/riscv: rvv-1.0: implement vstart CSR target/riscv: rvv-1.0: trigger illegal instruction exception if frm is not valid target/riscv: rvv-1.0: set mstatus.SD bit when writing vector CSRs target/riscv: rvv-1.0: floating-point reciprocal square-root estimate instruction target/riscv: rvv-1.0: floating-point reciprocal estimate instruction target/riscv: set mstatus.SD bit when writing fp CSRs target/riscv: rvv-1.0: rename r2_zimm to r2_zimm11 target/riscv: rvv-1.0: add vsetivli instruction target/riscv: rvv-1.0: add evl parameter to vext_ldst_us() target/riscv: rvv-1.0: add vector unit-stride mask load/store insns target/riscv: rvv-1.0: rename vmandnot.mm and vmornot.mm to vmandn.mm and vmorn.mm target/riscv: rvv-1.0: update opivv_vadc_check() comment Greentime Hu (1): target/riscv: rvv-1.0: add vlenb register Hsiangkai Wang (1): target/riscv: gdb: support vector registers for rv64 & rv32 LIU Zhiwei (3): target/riscv: rvv-1.0: add mstatus VS field target/riscv: rvv-1.0: add sstatus VS field target/riscv: rvv-1.0: add vcsr register target/riscv/cpu.c | 12 +- target/riscv/cpu.h | 85 +- target/riscv/cpu_bits.h | 10 + target/riscv/cpu_helper.c | 15 +- target/riscv/csr.c | 92 +- target/riscv/fpu_helper.c | 17 +- target/riscv/gdbstub.c | 184 ++ target/riscv/helper.h | 435 ++- target/riscv/insn32.decode | 294 +- target/riscv/insn_trans/trans_rvv.c.inc | 2423 +++++++++------ target/riscv/internals.h | 24 +- target/riscv/translate.c | 74 +- target/riscv/vector_helper.c | 3601 ++++++++++++----------- 13 files changed, 4176 insertions(+), 3090 deletions(-) -- 2.25.1
