huang...@chinatelecom.cn writes: > From: Hyman Huang(黄勇) <huang...@chinatelecom.cn> > > Implement dirtyrate calculation periodically basing on > dirty-ring and throttle vCPU until it reachs the quota > dirty page rate given by user. > > Introduce qmp commands set-dirty-limit/cancel-dirty-limit to > set/cancel dirty page limit on vCPU. > > Signed-off-by: Hyman Huang(黄勇) <huang...@chinatelecom.cn> > --- > cpus-common.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++ > include/hw/core/cpu.h | 9 +++++++++ > qapi/migration.json | 43 +++++++++++++++++++++++++++++++++++++++++++ > softmmu/vl.c | 1 + > 4 files changed, 101 insertions(+) > > diff --git a/cpus-common.c b/cpus-common.c > index 6e73d3e..86c7712 100644 > --- a/cpus-common.c > +++ b/cpus-common.c > @@ -23,6 +23,11 @@ > #include "hw/core/cpu.h" > #include "sysemu/cpus.h" > #include "qemu/lockable.h" > +#include "sysemu/dirtylimit.h" > +#include "sysemu/cpu-throttle.h" > +#include "sysemu/kvm.h" > +#include "qapi/error.h" > +#include "qapi/qapi-commands-migration.h" > > static QemuMutex qemu_cpu_list_lock; > static QemuCond exclusive_cond; > @@ -352,3 +357,46 @@ void process_queued_cpu_work(CPUState *cpu) > qemu_mutex_unlock(&cpu->work_mutex); > qemu_cond_broadcast(&qemu_work_cond); > } > + > +void qmp_set_dirty_limit(int64_t idx, > + uint64_t dirtyrate, > + Error **errp) > +{ > + if (!kvm_enabled() || !kvm_dirty_ring_enabled()) { > + error_setg(errp, "setting a dirty page limit requires KVM with" > + " accelerator property 'dirty-ring-size' set'"); > + return; > + } > + > + dirtylimit_calc(); > + dirtylimit_vcpu(idx, dirtyrate); > +} > + > +void qmp_cancel_dirty_limit(int64_t idx, > + Error **errp) > +{ > + if (!kvm_enabled() || !kvm_dirty_ring_enabled()) { > + error_setg(errp, "KVM with accelerator property 'dirty-ring-size'" > + " not set, abort canceling a dirty page limit"); > + return; > + }
Is this check actually needed? It's not when !dirtylimit_enabled(idx). > + > + if (!dirtylimit_enabled(idx)) { > + error_setg(errp, "dirty page limit for the CPU %ld not set", idx); "for CPU" > + return; > + } > + > + if (unlikely(!dirtylimit_cancel_vcpu(idx))) { I don't think unlikely() matters here. > + dirtylimit_calc_quit(); > + } > +} > + > +void dirtylimit_setup(int max_cpus) > +{ > + if (!kvm_enabled() || !kvm_dirty_ring_enabled()) { > + return; > + } > + > + dirtylimit_calc_state_init(max_cpus); > + dirtylimit_state_init(max_cpus); > +} > diff --git a/include/hw/core/cpu.h b/include/hw/core/cpu.h > index e948e81..11df012 100644 > --- a/include/hw/core/cpu.h > +++ b/include/hw/core/cpu.h > @@ -881,6 +881,15 @@ void end_exclusive(void); > */ > void qemu_init_vcpu(CPUState *cpu); > > +/** > + * dirtylimit_setup: > + * > + * Initializes the global state of dirtylimit calculation and > + * dirtylimit itself. This is prepared for vCPU dirtylimit which > + * could be triggered during vm lifecycle. > + */ > +void dirtylimit_setup(int max_cpus); > + > #define SSTEP_ENABLE 0x1 /* Enable simulated HW single stepping */ > #define SSTEP_NOIRQ 0x2 /* Do not use IRQ while single stepping */ > #define SSTEP_NOTIMER 0x4 /* Do not Timers while single stepping */ > diff --git a/qapi/migration.json b/qapi/migration.json > index bbfd48c..57c9a63 100644 > --- a/qapi/migration.json > +++ b/qapi/migration.json > @@ -1850,6 +1850,49 @@ > { 'command': 'query-dirty-rate', 'returns': 'DirtyRateInfo' } > > ## > +# @set-dirty-limit: > +# > +# Set the upper limit of dirty page rate for a virtual CPU. > +# > +# Requires KVM with accelerator property "dirty-ring-size" set. > +# A virtual CPU's dirty page rate is a measure of its memory load. > +# To observe dirty page rates, use @calc-dirty-rate. > +# > +# @cpu-index: index of the virtual CPU. > +# > +# @dirty-rate: upper limit for the specified vCPU's dirty page rate (MB/s) > +# > +# Since: 7.0 > +# > +# Example: > +# {"execute": "set-dirty-limit"} > +# "arguments": { "cpu-index": 0, > +# "dirty-rate": 200 } } > +# > +## > +{ 'command': 'set-dirty-limit', > + 'data': { 'cpu-index': 'int', 'dirty-rate': 'uint64' } } > + > +## > +# @cancel-dirty-limit: > +# > +# Cancel the dirty page limit for the vCPU which has been set with > +# set-dirty-limit command. Note that this command requires support from > +# dirty ring, same as the "set-dirty-limit" command. > +# > +# @cpu-index: index of the virtual CPU to cancel the dirty page limit I'd go with # @cpu-index: index of the virtual CPU. > +# > +# Since: 7.0 > +# > +# Example: > +# {"execute": "cancel-dirty-limit"} > +# "arguments": { "cpu-index": 0 } } > +# > +## > +{ 'command': 'cancel-dirty-limit', > + 'data': { 'cpu-index': 'int' } } > + > +## > # @snapshot-save: > # > # Save a VM snapshot > diff --git a/softmmu/vl.c b/softmmu/vl.c > index 620a1f1..0f83ce3 100644 > --- a/softmmu/vl.c > +++ b/softmmu/vl.c > @@ -3777,5 +3777,6 @@ void qemu_init(int argc, char **argv, char **envp) > qemu_init_displays(); > accel_setup_post(current_machine); > os_setup_post(); > + dirtylimit_setup(current_machine->smp.max_cpus); > resume_mux_open(); > } QAPI schema: Acked-by: Markus Armbruster <arm...@redhat.com>