Implement the ITS MOVALL command, which takes all the pending
interrupts on a source redistributor and makes the not-pending on
that source redistributor and pending on a destination redistributor.
This is a GICv3 ITS command which we forgot to implement. (It is
not used by Linux guests.)
Signed-off-by: Peter Maydell <peter.mayd...@linaro.org>
---
hw/intc/gicv3_internal.h | 16 +++++++++++
hw/intc/arm_gicv3_its.c | 55 ++++++++++++++++++++++++++++++++++++++
hw/intc/arm_gicv3_redist.c | 54 +++++++++++++++++++++++++++++++++++++
3 files changed, 125 insertions(+)
diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
index a316f6c58a5..da45975d92b 100644
--- a/hw/intc/gicv3_internal.h
+++ b/hw/intc/gicv3_internal.h
@@ -324,6 +324,7 @@ FIELD(GITS_TYPER, CIL, 36, 1)
#define GITS_CMD_MAPI 0x0B
#define GITS_CMD_INV 0x0C
#define GITS_CMD_INVALL 0x0D
+#define GITS_CMD_MOVALL 0x0E
#define GITS_CMD_DISCARD 0x0F
/* MAPC command fields */
@@ -355,6 +356,10 @@ FIELD(MAPC, RDBASE, 16, 32)
#define L2_TABLE_VALID_MASK CMD_FIELD_VALID_MASK
#define TABLE_ENTRY_VALID_MASK (1ULL << 0)
+/* MOVALL command fields */
+FIELD(MOVALL_2, RDBASE1, 16, 36)
+FIELD(MOVALL_3, RDBASE2, 16, 36)
+
/*
* 12 bytes Interrupt translation Table Entry size
* as per Table 5.3 in GICv3 spec
@@ -497,6 +502,17 @@ void gicv3_redist_update_lpi(GICv3CPUState *cs);
* an incoming migration has loaded new state.
*/
void gicv3_redist_update_lpi_only(GICv3CPUState *cs);
+/**
+ * gicv3_redist_movall_lpis:
+ * @src: source redistributor
+ * @dest: destination redistributor
+ *
+ * Scan the LPI pending table for @src, and for each pending LPI there
+ * mark it as not-pending for @src and pending for @dest, as required
+ * by the ITS MOVALL command.
+ */
+void gicv3_redist_movall_lpis(GICv3CPUState *src, GICv3CPUState *dest);
+
void gicv3_redist_send_sgi(GICv3CPUState *cs, int grp, int irq, bool ns);
void gicv3_init_cpuif(GICv3State *s);
diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c
index 3f2ead45369..ebc0403b3c7 100644
--- a/hw/intc/arm_gicv3_its.c
+++ b/hw/intc/arm_gicv3_its.c
@@ -582,6 +582,58 @@ static ItsCmdResult process_mapd(GICv3ITSState *s,
uint64_t value,
return update_dte(s, devid, valid, size, itt_addr) ? CMD_CONTINUE :
CMD_STALL;
}
+static ItsCmdResult process_movall(GICv3ITSState *s, uint64_t value,
+ uint32_t offset)
+{
+ AddressSpace *as = &s->gicv3->dma_as;
+ MemTxResult res = MEMTX_OK;
+ uint64_t rd1, rd2;
+
+ /* No fields in dwords 0 or 1 */
+ offset += NUM_BYTES_IN_DW;
+ offset += NUM_BYTES_IN_DW;
+ value = address_space_ldq_le(as, s->cq.base_addr + offset,
+ MEMTXATTRS_UNSPECIFIED, &res);
+ if (res != MEMTX_OK) {
+ return CMD_STALL;
+ }
+
+ rd1 = FIELD_EX64(value, MOVALL_2, RDBASE1);
+ if (rd1 >= s->gicv3->num_cpu) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: RDBASE1 %" PRId64
+ " out of range (must be less than %d)\n",
+ __func__, rd1, s->gicv3->num_cpu);
+ return CMD_CONTINUE;
+ }
+
+ offset += NUM_BYTES_IN_DW;
+ value = address_space_ldq_le(as, s->cq.base_addr + offset,
+ MEMTXATTRS_UNSPECIFIED, &res);
+ if (res != MEMTX_OK) {
+ return CMD_STALL;
+ }
+
+ rd2 = FIELD_EX64(value, MOVALL_3, RDBASE2);
+ if (rd2 >= s->gicv3->num_cpu) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: RDBASE2 %" PRId64
+ " out of range (must be less than %d)\n",
+ __func__, rd2, s->gicv3->num_cpu);
+ return CMD_CONTINUE;
+ }
+
+ if (rd1 == rd2) {
+ /* Move to same target must succeed as a no-op */
+ return CMD_CONTINUE;
+ }
+
+ /* Move all pending LPIs from redistributor 1 to redistributor 2 */
+ gicv3_redist_movall_lpis(&s->gicv3->cpu[rd1], &s->gicv3->cpu[rd2]);
+
+ return CMD_CONTINUE;
+}
+
/*
* Current implementation blocks until all
* commands are processed
@@ -679,6 +731,9 @@ static void process_cmdq(GICv3ITSState *s)
gicv3_redist_update_lpi(&s->gicv3->cpu[i]);
}
break;
+ case GITS_CMD_MOVALL:
+ result = process_movall(s, data, cq_offset);
+ break;
default:
break;
}
diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c
index d81d8e5f076..d1645ba22c6 100644
--- a/hw/intc/arm_gicv3_redist.c
+++ b/hw/intc/arm_gicv3_redist.c
@@ -681,6 +681,60 @@ void gicv3_redist_process_lpi(GICv3CPUState *cs, int irq,
int level)
gicv3_redist_lpi_pending(cs, irq, level);
}
+void gicv3_redist_movall_lpis(GICv3CPUState *src, GICv3CPUState *dest)
+{
+ /*
+ * We must move all pending LPIs from the source redistributor
+ * to the destination. That is, for every pending LPI X on
+ * src, we must set it not-pending on src and pending on dest.
+ * LPIs that are already pending on dest are not cleared.
+ *
+ * If LPIs are disabled on dest this is CONSTRAINED UNPREDICTABLE:
+ * we choose to NOP. If LPIs are disabled on source there's nothing
+ * to be transferred anyway.
+ */
+ AddressSpace *as = &src->gic->dma_as;
+ uint64_t idbits;
+ uint32_t pendt_size;
+ uint64_t src_baddr, dest_baddr;
+ int i;
+
+ if (!(src->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) ||
+ !(dest->gicr_ctlr & GICR_CTLR_ENABLE_LPIS)) {
+ return;
+ }
+
+ idbits = MIN(FIELD_EX64(src->gicr_propbaser, GICR_PROPBASER, IDBITS),
+ GICD_TYPER_IDBITS);
+ idbits = MIN(FIELD_EX64(dest->gicr_propbaser, GICR_PROPBASER, IDBITS),
+ idbits);
+
+ pendt_size = 1ULL << (idbits + 1);
+ src_baddr = src->gicr_pendbaser & R_GICR_PENDBASER_PHYADDR_MASK;
+ dest_baddr = dest->gicr_pendbaser & R_GICR_PENDBASER_PHYADDR_MASK;
+
+ for (i = GICV3_LPI_INTID_START / 8; i < pendt_size / 8; i++) {
+ uint8_t src_pend, dest_pend;
+
+ address_space_read(as, src_baddr + i, MEMTXATTRS_UNSPECIFIED,
+ &src_pend, sizeof(src_pend));
+ if (!src_pend) {
+ continue;
+ }
+ address_space_read(as, dest_baddr + i, MEMTXATTRS_UNSPECIFIED,
+ &dest_pend, sizeof(dest_pend));
+ dest_pend |= src_pend;
+ src_pend = 0;
+ address_space_write(as, src_baddr + i, MEMTXATTRS_UNSPECIFIED,
+ &src_pend, sizeof(src_pend));
+ address_space_write(as, dest_baddr + i, MEMTXATTRS_UNSPECIFIED,
+ &dest_pend, sizeof(dest_pend));
+ }
+
+ gicv3_redist_update_lpi(src);
+ gicv3_redist_update_lpi(dest);
+}
+
void gicv3_redist_set_irq(GICv3CPUState *cs, int irq, int level)
{
/* Update redistributor state for a change in an external PPI input line */
--
2.25.1
