Currently, the allocation of the flash devices uses the number of slave selects configured in the SoC realize routine. It is simpler to use directly the number of FMC devices defined in the machine class and 1 for spi devices (which is what the SoC does in the back of the machine).
Reviewed-by: Philippe Mathieu-Daudé <f4...@amsat.org> Reviewed-by: Alistair Francis <alistair.fran...@wdc.com> Message-Id: <20220307071856.1410731-3-...@kaod.org> Signed-off-by: Cédric Le Goater <c...@kaod.org> --- hw/arm/aspeed.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index b71bc2559baa..65588017659c 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -271,13 +271,12 @@ static void write_boot_rom(DriveInfo *dinfo, hwaddr addr, size_t rom_size, rom_add_blob_fixed("aspeed.boot_rom", storage, rom_size, addr); } -static void aspeed_board_init_flashes(AspeedSMCState *s, - const char *flashtype, - int unit0) +static void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, + unsigned int count, int unit0) { int i ; - for (i = 0; i < s->num_cs; ++i) { + for (i = 0; i < count; ++i) { DriveInfo *dinfo = drive_get(IF_MTD, 0, unit0 + i); qemu_irq cs_line; DeviceState *dev; @@ -373,10 +372,10 @@ static void aspeed_machine_init(MachineState *machine) aspeed_board_init_flashes(&bmc->soc.fmc, bmc->fmc_model ? bmc->fmc_model : amc->fmc_model, - 0); + amc->num_cs, 0); aspeed_board_init_flashes(&bmc->soc.spi[0], bmc->spi_model ? bmc->spi_model : amc->spi_model, - bmc->soc.fmc.num_cs); + 1, amc->num_cs); /* Install first FMC flash content as a boot rom. */ if (drive0) { -- 2.34.1