Signed-off-by: Evgeny Voevodin <e.voevo...@samsung.com>
---
 hw/devices.h |    2 +-
 hw/lan9118.c |  115 ++++++++++++++++++++++++++++++++++++++++++++++++++++++----
 2 files changed, 109 insertions(+), 8 deletions(-)

diff --git a/hw/devices.h b/hw/devices.h
index 1a55c1e..24cae4c 100644
--- a/hw/devices.h
+++ b/hw/devices.h
@@ -10,7 +10,7 @@ struct MemoryRegion;
 void smc91c111_init(NICInfo *, uint32_t, qemu_irq);
 
 /* lan9118.c */
-void lan9118_init(NICInfo *, uint32_t, qemu_irq);
+DeviceState *lan9118_init(NICInfo *, uint32_t, qemu_irq);
 
 /* tsc210x.c */
 uWireSlave *tsc2102_init(qemu_irq pint);
diff --git a/hw/lan9118.c b/hw/lan9118.c
index ee8b2ea..e44e5f8 100644
--- a/hw/lan9118.c
+++ b/hw/lan9118.c
@@ -212,6 +212,17 @@ typedef struct {
     int rxp_offset;
     int rxp_size;
     int rxp_pad;
+
+    uint32_t write_word_prev_offset;
+    uint32_t write_word_n;
+    uint16_t write_word_l;
+    uint16_t write_word_h;
+    uint32_t read_word_prev_offset;
+    uint32_t read_word_n;
+    uint32_t read_long;
+
+    uint32_t mode_16bit;
+
 } lan9118_state;
 
 static void lan9118_update(lan9118_state *s)
@@ -345,6 +356,9 @@ static void lan9118_reset(DeviceState *d)
     s->mac_mii_data = 0;
     s->mac_flow = 0;
 
+    s->read_word_n = 0;
+    s->write_word_n = 0;
+
     phy_reset(s);
 
     s->eeprom_writable = 0;
@@ -896,11 +910,11 @@ static void lan9118_tick(void *opaque)
 }
 
 static void lan9118_writel(void *opaque, target_phys_addr_t offset,
-                           uint64_t val, unsigned size)
+                           uint32_t val)
 {
     lan9118_state *s = (lan9118_state *)opaque;
     offset &= 0xff;
-    
+
     //DPRINTF("Write reg 0x%02x = 0x%08x\n", (int)offset, val);
     if (offset >= 0x20 && offset < 0x40) {
         /* TX FIFO */
@@ -1029,8 +1043,47 @@ static void lan9118_writel(void *opaque, 
target_phys_addr_t offset,
     lan9118_update(s);
 }
 
-static uint64_t lan9118_readl(void *opaque, target_phys_addr_t offset,
-                              unsigned size)
+static void lan9118_writew(void *opaque, target_phys_addr_t offset,
+                           uint32_t val)
+{
+    lan9118_state *s = (lan9118_state *)opaque;
+    offset &= 0xff;
+
+    if (s->write_word_prev_offset != (offset & ~0x3)) {
+        /* New offset, reset word counter */
+        s->write_word_n = 0;
+        s->write_word_prev_offset = offset & ~0x3;
+    }
+
+    if (offset & 0x2) {
+        s->write_word_h = val;
+    } else {
+        s->write_word_l = val;
+    }
+
+    //DPRINTF("Writew reg 0x%02x = 0x%08x\n", (int)offset, val);
+    s->write_word_n++;
+    if (s->write_word_n == 2) {
+        s->write_word_n = 0;
+        lan9118_writel(s, offset & ~3, s->write_word_l +
+                (s->write_word_h << 16));
+    }
+}
+
+static void lan9118_write(void *opaque, target_phys_addr_t offset,
+                          uint64_t val, unsigned size)
+{
+    switch (size) {
+    case 2:
+        return lan9118_writew(opaque, offset, (uint32_t)val);
+    case 4:
+        return lan9118_writel(opaque, offset, (uint32_t)val);
+    }
+
+    hw_error("lan9118_write: Bad size 0x%x\n", size);
+}
+
+static uint32_t lan9118_readl(void *opaque, target_phys_addr_t offset)
 {
     lan9118_state *s = (lan9118_state *)opaque;
 
@@ -1065,6 +1118,9 @@ static uint64_t lan9118_readl(void *opaque, 
target_phys_addr_t offset,
     case CSR_TX_CFG:
         return s->tx_cfg;
     case CSR_HW_CFG:
+        if (s->mode_16bit) {
+            return s->hw_cfg & ~0x4;
+        }
         return s->hw_cfg | 0x4;
     case CSR_RX_DP_CTRL:
         return 0;
@@ -1103,9 +1159,51 @@ static uint64_t lan9118_readl(void *opaque, 
target_phys_addr_t offset,
     return 0;
 }
 
+static uint32_t lan9118_readw(void *opaque, target_phys_addr_t offset)
+{
+    lan9118_state *s = (lan9118_state *)opaque;
+    uint32_t val;
+
+    if (s->read_word_prev_offset != (offset & ~0x3)) {
+        /* New offset, reset word counter */
+        s->read_word_n = 0;
+        s->read_word_prev_offset = offset & ~0x3;
+    }
+
+    s->read_word_n++;
+    if (s->read_word_n == 1) {
+        s->read_long = lan9118_readl(s, offset & ~3);
+    } else {
+        s->read_word_n = 0;
+    }
+
+    if (offset & 2) {
+        val = s->read_long >> 16;
+    } else {
+        val = s->read_long & 0xFFFF;
+    }
+
+    //DPRINTF("Readw reg 0x%02x, val 0x%x\n", (int)offset, val);
+    return val;
+}
+
+static uint64_t lan9118_read(void *opaque, target_phys_addr_t offset,
+                             unsigned size)
+{
+    switch (size) {
+    case 2:
+        return lan9118_readw(opaque, offset);
+    case 4:
+        return lan9118_readl(opaque, offset);
+    }
+
+    hw_error("lan9118_read: Bad size 0x%x\n", size);
+    return 0;
+}
+
 static const MemoryRegionOps lan9118_mem_ops = {
-    .read = lan9118_readl,
-    .write = lan9118_writel,
+    .read = lan9118_read,
+    .write = lan9118_write,
     .endianness = DEVICE_NATIVE_ENDIAN,
 };
 
@@ -1162,6 +1260,7 @@ static SysBusDeviceInfo lan9118_info = {
     .qdev.reset = lan9118_reset,
     .qdev.props = (Property[]) {
         DEFINE_NIC_PROPERTIES(lan9118_state, conf),
+        DEFINE_PROP_UINT32("mode_16bit", lan9118_state, mode_16bit, 0),
         DEFINE_PROP_END_OF_LIST(),
     }
 };
@@ -1173,7 +1272,7 @@ static void lan9118_register_devices(void)
 
 /* Legacy helper function.  Should go away when machine config files are
    implemented.  */
-void lan9118_init(NICInfo *nd, uint32_t base, qemu_irq irq)
+DeviceState *lan9118_init(NICInfo *nd, uint32_t base, qemu_irq irq)
 {
     DeviceState *dev;
     SysBusDevice *s;
@@ -1185,6 +1284,8 @@ void lan9118_init(NICInfo *nd, uint32_t base, qemu_irq 
irq)
     s = sysbus_from_qdev(dev);
     sysbus_mmio_map(s, 0, base);
     sysbus_connect_irq(s, 0, irq);
+
+    return dev;
 }
 
 device_init(lan9118_register_devices)
-- 
1.7.4.1


Reply via email to