On 01/08/2012 09:27 PM, Hervé Poussineau wrote:
Signed-off-by: Hervé Poussineau<hpous...@reactos.org> --- hw/fdc.c | 21 +++++++++++++++++++++ 1 files changed, 21 insertions(+), 0 deletions(-) diff --git a/hw/fdc.c b/hw/fdc.c index ddfa91f..67cd14f 100644 --- a/hw/fdc.c +++ b/hw/fdc.c @@ -227,6 +227,7 @@ static void fdctrl_write_rate(FDCtrl *fdctrl, uint32_t value); static uint32_t fdctrl_read_data(FDCtrl *fdctrl); static void fdctrl_write_data(FDCtrl *fdctrl, uint32_t value); static uint32_t fdctrl_read_dir(FDCtrl *fdctrl); +static void fdctrl_write_ccr(FDCtrl *fdctrl, uint32_t value); enum { FD_DIR_WRITE = 0, @@ -251,6 +252,7 @@ enum { FD_REG_DSR = 0x04, FD_REG_FIFO = 0x05, FD_REG_DIR = 0x07, + FD_REG_CCR = 0x07, }; enum { @@ -495,6 +497,8 @@ static void fdctrl_write (void *opaque, uint32_t reg, uint32_t value) case FD_REG_FIFO: fdctrl_write_data(fdctrl, value); break; + case FD_REG_CCR: + fdctrl_write_ccr(fdctrl, value); default: break; } @@ -885,6 +889,23 @@ static void fdctrl_write_rate(FDCtrl *fdctrl, uint32_t value) fdctrl->dsr = value; } +/* Configuration control register: 0x07 (write) */ +static void fdctrl_write_ccr(FDCtrl *fdctrl, uint32_t value) +{ + /* Reset mode */ + if (!(fdctrl->dor& FD_DOR_nRESET)) { + FLOPPY_DPRINTF("Floppy controller in RESET state !\n"); + return; + } + FLOPPY_DPRINTF("configuration control register set to 0x%02x\n", value); + + /* Only the rate selection bits used in AT mode, and we + * store those in the DSR. + */ + fdctrl->dsr = (fdctrl->dsr& ~FD_DSR_DRATEMASK) | + (value& FD_DSR_DRATEMASK); +} + static int fdctrl_media_changed(FDrive *drv) { int ret;
This should go before patch 7, shouldn't it? Paolo