On Wed, Nov 23, 2022 at 03:08:25PM +0800, Jason Wang wrote:
> On Wed, Nov 23, 2022 at 2:15 PM Michael S. Tsirkin <m...@redhat.com> wrote:
> >
> > On Wed, Nov 23, 2022 at 01:47:04PM +0800, Jason Wang wrote:
> > > On Wed, Nov 23, 2022 at 1:26 PM Jason Wang <jasow...@redhat.com> wrote:
> > > >
> > > > On Wed, Nov 23, 2022 at 12:28 AM Eric Auger <eric.au...@redhat.com>
> > > > wrote:
> > > > >
> > > > > Hi,
> > > > >
> > > > > On 11/22/22 10:43, Michael S. Tsirkin wrote:
> > > > > > On Tue, Nov 22, 2022 at 11:01:11AM +0800, Jason Wang wrote:
> > > > > >> When vIOMMU is enabled, the vq->used_phys is actually the IOVA not
> > > > > >> GPA. So we need to translate it to GPA before the syncing
> > > > > >> otherwise we
> > > > > >> may hit the following crash since IOVA could be out of the scope of
> > > > > >> the GPA log size. This could be noted when using virtio-IOMMU with
> > > > > >> vhost using 1G memory.
> > > > > > Noted how exactly? What does "using 1G memory" mean?
> > > > >
> > > > > We hit the following assertion:
> > > > >
> > > > > qemu-system-x86_64: ../hw/virtio/vhost.c:85: vhost_dev_sync_region:
> > > > > Assertion `end / VHOST_LOG_CHUNK < dev->log_size' failed.
> > > > >
> > > > > On the last time vhost_get_log_size() is called it takes into account
> > > > > 2 regions when computing the log_size:
> > > > > qemu-system-x86_64: vhost_get_log_size region 0 last=0x9ffff updated
> > > > > log_size=0x3
> > > > > qemu-system-x86_64: vhost_get_log_size region 1 last=0x3fffffff
> > > > > updated log_size=0x1000
> > > > > so in vhost_migration_log() vhost_get_log_size(dev) returns 0x1000
> > > > >
> > > > > In the test case, memory_region_sync_dirty_bitmap() gets called for
> > > > > mem-machine_mem, vga.vram (several times) and eventually on pc.bios.
> > > > > This latter is reponsible for the assertion:
> > > > >
> > > > > qemu-system-x86_64: vhost_log_sync calls sync_dirty_map on pc.bios
> > > > > for the full range
> > > > > qemu-system-x86_64: vhost_sync_dirty_bitmap calls
> > > > > vhost_dev_sync_region on region 0
> > > > > qemu-system-x86_64: vhost_dev_sync_region end=0x9ffff <
> > > > > start=0xfffc0000
> > > > > qemu-system-x86_64: vhost_sync_dirty_bitmap calls
> > > > > vhost_dev_sync_region on region 1
> > > > > qemu-system-x86_64: vhost_dev_sync_region end=0x3fffffff <
> > > > > start=0xfffc0000
> > > > > qemu-system-x86_64: vhost_sync_dirty_bitmap calls
> > > > > vhost_dev_sync_region on vq 0 <-----
> > > > > qemu-system-x86_64: vhost_dev_sync_region pc.bios mfirst=0xfffc0000
> > > > > mlast=0xffffffff rfirst=0xfffff240 rlast=0xfffffa45
> > > > > qemu-system-x86_64: vhost_dev_sync_region pc.bios end=0xfffffa45
> > > > > VHOST_LOG_CHUNK=0x40000 end/VHOST_LOG_CHUNK=0x3fff
> > > > > dev->log_size=0x1000
> > > > > qemu-system-x86_64: ../hw/virtio/vhost.c:85: vhost_dev_sync_region:
> > > > > Assertion `end / VHOST_LOG_CHUNK < dev->log_size' failed.
> > > > >
> > > > >
> > > > >
> > > > > "using 1G memory": We hit the issue with a guest started with 1GB
> > > > > initial RAM.
> > > >
> > > > Yes, so in the case the guest iova allocator may try to use an IOVA
> > > > that is beyond 1G.
> > > >
> > > > >
> > > > >
> > > > > >
> > > > > >> Fixes: c471ad0e9bd46 ("vhost_net: device IOTLB support")
> > > > > >> Cc: qemu-sta...@nongnu.org
> > > > > >> Reported-by: Yalan Zhang <yalzh...@redhat.com>
> > > > > >> Tested-by: Eric Auger <eric.au...@redhat.com>
> > > > > >> Tested-by: Lei Yang <leiy...@redhat.com>
> > > > > >> Signed-off-by: Jason Wang <jasow...@redhat.com>
> > > > > >> ---
> > > > > >> hw/virtio/vhost.c | 65
> > > > > >> ++++++++++++++++++++++++++++++++---------------
> > > > > >> 1 file changed, 45 insertions(+), 20 deletions(-)
> > > > > >>
> > > > > >> diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
> > > > > >> index d1c4c20b8c..26b319f34e 100644
> > > > > >> --- a/hw/virtio/vhost.c
> > > > > >> +++ b/hw/virtio/vhost.c
> > > > > >> @@ -106,11 +106,30 @@ static void vhost_dev_sync_region(struct
> > > > > >> vhost_dev *dev,
> > > > > >> }
> > > > > >> }
> > > > > >>
> > > > > >> +static bool vhost_dev_has_iommu(struct vhost_dev *dev)
> > > > > >> +{
> > > > > >> + VirtIODevice *vdev = dev->vdev;
> > > > > >> +
> > > > > >> + /*
> > > > > >> + * For vhost, VIRTIO_F_IOMMU_PLATFORM means the backend
> > > > > >> support
> > > > > >> + * incremental memory mapping API via IOTLB API. For platform
> > > > > >> that
> > > > > >> + * does not have IOMMU, there's no need to enable this feature
> > > > > >> + * which may cause unnecessary IOTLB miss/update transactions.
> > > > > >> + */
> > > > > >> + if (vdev) {
> > > > > >> + return virtio_bus_device_iommu_enabled(vdev) &&
> > > > > >> + virtio_host_has_feature(vdev,
> > > > > >> VIRTIO_F_IOMMU_PLATFORM);
> > > > > >> + } else {
> > > > > >> + return false;
> > > > > >> + }
> > > > > >> +}
> > > > > >> +
> > > > > >> static int vhost_sync_dirty_bitmap(struct vhost_dev *dev,
> > > > > >> MemoryRegionSection *section,
> > > > > >> hwaddr first,
> > > > > >> hwaddr last)
> > > > > >> {
> > > > > >> + IOMMUTLBEntry iotlb;
> > > > > > why don't we move this inside the scope where it's used?
> > > >
> > > > That's fine.
> > > >
> > > > > >
> > > > > >> int i;
> > > > > >> hwaddr start_addr;
> > > > > >> hwaddr end_addr;
> > > > > >> @@ -132,13 +151,37 @@ static int vhost_sync_dirty_bitmap(struct
> > > > > >> vhost_dev *dev,
> > > > > >> }
> > > > > >> for (i = 0; i < dev->nvqs; ++i) {
> > > > > >> struct vhost_virtqueue *vq = dev->vqs + i;
> > > > > >> + hwaddr used_phys = vq->used_phys, used_size =
> > > > > >> vq->used_size;
> > > > > >> + hwaddr phys, s;
> > > > > > these two, too.
> > > >
> > > > Right.
> > > >
> > > > > >
> > > > > >>
> > > > > >> if (!vq->used_phys && !vq->used_size) {
> > > > > >> continue;
> > > > > >> }
> > > > > >>
> > > > > >> - vhost_dev_sync_region(dev, section, start_addr, end_addr,
> > > > > >> vq->used_phys,
> > > > > >> - range_get_last(vq->used_phys,
> > > > > >> vq->used_size));
> > > > > >> + if (vhost_dev_has_iommu(dev)) {
> > > > > >> + while (used_size) {
> > > > > >> + rcu_read_lock();
> > > > > >> + iotlb =
> > > > > >> address_space_get_iotlb_entry(dev->vdev->dma_as,
> > > > > >> + used_phys,
> > > > > >> + true,
> > > > > >> MEMTXATTRS_UNSPECIFIED);
> > > > > >> + rcu_read_unlock();
> > > > > >> +
> > > > > >> + if (iotlb.target_as == NULL) {
> > > > > >> + return -EINVAL;
> > > > > > I am not sure how this can trigger. I don't like == NULL:
> > > > > > !iotlb.target_as is more succint. But a bigger question is how to
> > > > > > handle this. callers ignore the return value so maybe
> > > > > > log guest error? iommu seems misconfigured ...
> > > >
> > > > Ok.
> > > >
> > > > > >
> > > > > >
> > > > > >> + }
> > > > > >> +
> > > > > >> + phys = iotlb.translated_addr;
> > > > > >> + s = MIN(iotlb.addr_mask + 1, used_size);
> > > > > > Note, that iotlb.translated_addr here is an aligned address and
> > > > > > iotlb.addr_mask + 1 is size from there.
> > > > > >
> > > > > > So I think phys that you want is actually
> > > > > > phys = iotlb.translated_addr + (used_phys & iotlb.addr_mask);
> > > > > >
> > > > > >
> > > > > >
> > > > > > accordingly, the size would be from there until end of mask:
> > > > > > s = MIN(iotlb.addr_mask + 1 - (used_phys & iotlb.addr_mask),
> > > > > > used_size);
> > > > > >
> > > > > >
> > > > > > Also, it bothers me that the math here will give you 0 if addr_mask
> > > > > > is
> > > > > > all ones.
> > >
> > > So even if addr_mask is all ones, we end up with s = MIN(1, used_size)
> > > which should be fine.
> >
> > How do you figure? addr_mask is all ones, addr_mask + 1 is 0, we get MIN(0,
> > used_size).
>
> But we have a substration after that.
I don't get it. This is your code:
s = MIN(iotlb.addr_mask + 1, used_size);
if addr_mask is all ones s becomes 0. Then while loop will loop forever.
> In order to get a zero result,
> used_phys must be zero then used_phys & iotlb.addr_mask can be zero,
> or anything I missed here?
>
> The 1 is calculated via assuming used_phys are all ones.
>
> Thanks
Not used_phys, I'm talking about addr_mask being all ones.
>
> >
> > > The used_size has been validated before to be
> > > non-zero.
> > >
> > > Thanks
> > >
> > > > Then MIN will give 0 too and we loop forever. I think this
> > > > > > can not trigger, but I'd rather we play it safe and add outside of
> > > > > > MIN
> > > > > > after it's capped to a reasonable value. So we end up with:
> > > > > >
> > > > > > /* Distance from start of used ring until last byte of IOMMU
> > > > > > page */
> > > > > > s = iotlb.addr_mask - (used_phys & iotlb.addr_mask);
> > > > > > /* size of used ring, or of the part of it until end of IOMMU
> > > > > > page */
> > > > > > s = MIN(s, used_size - 1) + 1;
> > > > > >
> > > > > >
> > > >
> > > > Right.
> > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >> +
> > > > > >> + vhost_dev_sync_region(dev, section, start_addr,
> > > > > >> end_addr, phys,
> > > > > >> + range_get_last(phys,
> > > > > >> used_size));
> > > > > > why are you syncing used_size here? Shouldn't it be s?
> > > >
> > > > Let me fix this.
> > > >
> > > > Thanks
> > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >> + used_size -= s;
> > > > > >> + used_phys += s;
> > > > > >> + }
> > > > > >> + } else {
> > > > > >> + vhost_dev_sync_region(dev, section, start_addr,
> > > > > >> end_addr, used_phys,
> > > > > >> + range_get_last(used_phys,
> > > > > >> used_size));
> > > > > >> + }
> > > > > >> }
> > > > > >> return 0;
> > > > > >> }
> > > > > >> @@ -306,24 +349,6 @@ static inline void
> > > > > >> vhost_dev_log_resize(struct vhost_dev *dev, uint64_t size)
> > > > > >> dev->log_size = size;
> > > > > >> }
> > > > > >>
> > > > > >> -static bool vhost_dev_has_iommu(struct vhost_dev *dev)
> > > > > >> -{
> > > > > >> - VirtIODevice *vdev = dev->vdev;
> > > > > >> -
> > > > > >> - /*
> > > > > >> - * For vhost, VIRTIO_F_IOMMU_PLATFORM means the backend
> > > > > >> support
> > > > > >> - * incremental memory mapping API via IOTLB API. For platform
> > > > > >> that
> > > > > >> - * does not have IOMMU, there's no need to enable this feature
> > > > > >> - * which may cause unnecessary IOTLB miss/update transactions.
> > > > > >> - */
> > > > > >> - if (vdev) {
> > > > > >> - return virtio_bus_device_iommu_enabled(vdev) &&
> > > > > >> - virtio_host_has_feature(vdev,
> > > > > >> VIRTIO_F_IOMMU_PLATFORM);
> > > > > >> - } else {
> > > > > >> - return false;
> > > > > >> - }
> > > > > >> -}
> > > > > >> -
> > > > > >> static void *vhost_memory_map(struct vhost_dev *dev, hwaddr addr,
> > > > > >> hwaddr *plen, bool is_write)
> > > > > >> {
> > > > > >> --
> > > > > >> 2.25.1
> > > > >
> > > > > Thanks
> > > > >
> > > > > Eric
> > > > >
> >
