Hi Strahinja, On Thu, Dec 8, 2022 at 8:24 PM Strahinja Jankovic < strahinjapjanko...@gmail.com> wrote:
> Hi Niek, > > On Wed, Dec 7, 2022 at 9:25 PM Niek Linnenbank <nieklinnenb...@gmail.com> > wrote: > > > > Hello Strahinja, > > > > Thanks for contribution these patches, and also taking the H3 into > account :-) > > Thank you for looking into these patches and all of the comments. I > will try to submit V2 of this patch set in the following days. > > > > > I've ran the avocado based acceptance tests for both boards and got > these results: > > > > $ ARMBIAN_ARTIFACTS_CACHED=yes AVOCADO_ALLOW_LARGE_STORAGE=yes > ./build/tests/venv/bin/avocado --show=app,console run -t > machine:orangepi-pc tests/avocado/boot_linux_console.py > > ... > > RESULTS : PASS 5 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | > CANCEL 0 > > JOB TIME : 114.24 s > > > > $ ./build/tests/venv/bin/avocado --show=app,console run -t > machine:cubieboard tests/avocado/boot_linux_console.py > > ... > > RESULTS : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | > CANCEL 0 > > JOB TIME : 22.79 s > > I did not think initially about avocado, but maybe I could also add an > SPL/SD boot test for the cubieboard, similarly to the way it is run > for Orange Pi, for V2 of the patch set? > Yeah that would be great. It can help to make testing easier when working on your current code, since its all automated. And when covering the SPL/SD boot with an acceptance test, it also helps to ensure it keeps working with future updates to Qemu code too. One thing to be aware of is to select an image with an URL that is stable. Once a new test is merged, and the image is subsequently deleted from the remote server, the test can't run anymore. We've had such a problem before with the orangepi-pc tests. Regards, Niek > > Best regards, > Strahinja > > > > > > > So that shows both machines are still running fine. During startup of > the bionic 20.08 image for orangepi-pc it did show this message: > > console: i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 > > console: sy8106a: probe of 0-0065 failed with error -110 > > > > The SY8106a appears to be an peripheral attached to the I2C bus on the > orangepi-pc, and we don't emulate the SY8106a yet, so that's an error to be > expected: > > https://linux-sunxi.org/SY8106A > > > > So for the series: > > Tested-by: Niek Linnenbank <nieklinnenb...@gmail.com> > > > > I'll try to reply to each patch as well. > > > > Kind regards, > > Niek > > > > On Sun, Dec 4, 2022 at 12:19 AM Strahinja Jankovic < > strahinjapjanko...@gmail.com> wrote: > >> > >> This patch series adds missing Allwinner A10 modules needed for > >> successful SPL boot: > >> - Clock controller module > >> - DRAM controller > >> - I2C0 controller (added also for Allwinner H3 since it is the same) > >> - AXP-209 connected to I2C0 bus > >> > >> It also updates Allwinner A10 emulation so SPL is copied from attached > >> SD card if `-kernel` parameter is not passed when starting QEMU > >> (approach adapted from Allwinner H3 implementation). > >> > >> Boot from SD card has been tested with Cubieboard Armbian SD card image > and custom > >> Yocto image built for Cubieboard. > >> Example usage for Armbian image: > >> qemu-system-arm -M cubieboard -nographic -sd > ~/Armbian_22.11.0-trunk_Cubieboard_kinetic_edge_6.0.7.img > >> > >> > >> Strahinja Jankovic (6): > >> hw/misc: Allwinner-A10 Clock Controller Module Emulation > >> hw/misc: Allwinner A10 DRAM Controller Emulation > >> hw/i2c: Allwinner TWI/I2C Emulation > >> hw/misc: Allwinner AXP-209 Emulation > >> hw/arm: Add AXP-209 to Cubieboard > >> hw/arm: Allwinner A10 enable SPL load from MMC > >> > >> hw/arm/Kconfig | 5 + > >> hw/arm/allwinner-a10.c | 40 +++ > >> hw/arm/allwinner-h3.c | 11 +- > >> hw/arm/cubieboard.c | 11 + > >> hw/i2c/Kconfig | 4 + > >> hw/i2c/allwinner-i2c.c | 417 ++++++++++++++++++++++++++ > >> hw/i2c/meson.build | 1 + > >> hw/misc/Kconfig | 10 + > >> hw/misc/allwinner-a10-ccm.c | 224 ++++++++++++++ > >> hw/misc/allwinner-a10-dramc.c | 179 +++++++++++ > >> hw/misc/allwinner-axp-209.c | 263 ++++++++++++++++ > >> hw/misc/meson.build | 3 + > >> include/hw/arm/allwinner-a10.h | 27 ++ > >> include/hw/arm/allwinner-h3.h | 3 + > >> include/hw/i2c/allwinner-i2c.h | 112 +++++++ > >> include/hw/misc/allwinner-a10-ccm.h | 67 +++++ > >> include/hw/misc/allwinner-a10-dramc.h | 68 +++++ > >> 17 files changed, 1444 insertions(+), 1 deletion(-) > >> create mode 100644 hw/i2c/allwinner-i2c.c > >> create mode 100644 hw/misc/allwinner-a10-ccm.c > >> create mode 100644 hw/misc/allwinner-a10-dramc.c > >> create mode 100644 hw/misc/allwinner-axp-209.c > >> create mode 100644 include/hw/i2c/allwinner-i2c.h > >> create mode 100644 include/hw/misc/allwinner-a10-ccm.h > >> create mode 100644 include/hw/misc/allwinner-a10-dramc.h > >> > >> -- > >> 2.30.2 > >> > > > > > > -- > > Niek Linnenbank > > > -- Niek Linnenbank
